[dpdk-users] OS hang when running helloworld example with two I210 NICs
Hunt, David
david.hunt at intel.com
Tue Mar 21 14:59:22 CET 2017
On 21/3/2017 1:17 PM, Hunt, David wrote:
>
>
> On 21/3/2017 12:46 PM, Michal Michalowski wrote:
>> Hi David,
>>
>> Here is the output of lscpi after NICs after the are configured for
>> DPDK:
>>
>> michal at michal-HP-Z200-Workstation:~$ sudo lspci -vs 18:00
>> 18:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network
>> Connection (rev 03)
>> Subsystem: Intel Corporation Ethernet Server Adapter I210-T1
>> Physical Slot: 4
>> Flags: fast devsel, IRQ 16
>> Memory at f3300000 (32-bit, non-prefetchable) [size=1M]
>> Memory at f3400000 (32-bit, non-prefetchable) [size=16K]
>> [virtual] Expansion ROM at f8000000 [disabled] [size=1M]
>> Capabilities: [40] Power Management version 3
>> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
>> Capabilities: [70] MSI-X: Enable- Count=5 Masked-
>> Capabilities: [a0] Express Endpoint, MSI 00
>> Capabilities: [100] Advanced Error Reporting
>> Capabilities: [140] Device Serial Number
>> a0-36-9f-ff-ff-d5-07-3b
>> Capabilities: [1a0] Transaction Processing Hints
>> Kernel driver in use: uio_pci_generic
>>
>> michal at michal-HP-Z200-Workstation:~$ sudo lspci -vs 24:00
>> 24:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network
>> Connection (rev 03)
>> Subsystem: Intel Corporation Ethernet Server Adapter I210-T1
>> Physical Slot: 1
>> Flags: fast devsel, IRQ 16
>> Memory at f3100000 (32-bit, non-prefetchable) [size=1M]
>> Memory at f3200000 (32-bit, non-prefetchable) [size=16K]
>> [virtual] Expansion ROM at f8200000 [disabled] [size=1M]
>> Capabilities: [40] Power Management version 3
>> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
>> Capabilities: [70] MSI-X: Enable- Count=5 Masked-
>> Capabilities: [a0] Express Endpoint, MSI 00
>> Capabilities: [100] Advanced Error Reporting
>> Capabilities: [140] Device Serial Number
>> a0-36-9f-ff-ff-d5-06-12
>> Capabilities: [1a0] Transaction Processing Hints
>> Kernel driver in use: uio_pci_generic
>>
>>
>> Cheers,
>> Michal
>
> Hi Michal,
> When I bind my interfaces to igb_uio, I maintain the bus master
> flag. Can you describe the hardware layout? Are you using any kind of
> PCI multiplexer/riser?
> Also, what is the output to 'lcpci -t'? That might give us some
> additional interesting information.
> Regards,
> Dave
Michal,
I looked a bit deeper into the specs of the HP-Z200 workstation. It
has only 1 PCI gen2, and the rest are PCI gen1. Only one of the 16x
slots is gen2.
Could you confirm in which slots a single NIC will work? You can use
"lspci -vvv -s 18:00 | grep LinkSta" to see the speeds when its installed.
Does a single NIC work in all slots?
Does it only work on the Gen2 16x slot?
If you put 2 NICS in 2 gen1 slots, do any of them work?
Regards,
Dave.
More information about the users
mailing list