[dpdk-dev,v7,25/27] net/i40e: set/clear VF stats from PF
Checks
Commit Message
From: Qi Zhang <qi.z.zhang@intel.com>
This patch add support to get/clear VF statistics
from PF side.
Two APIs are added:
rte_pmd_i40e_get_vf_stats.
rte_pmd_i40e_reset_vf_stats.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 81 +++++++++++++++++++++++++++++++
drivers/net/i40e/rte_pmd_i40e.h | 41 ++++++++++++++++
drivers/net/i40e/rte_pmd_i40e_version.map | 2 +
3 files changed, 124 insertions(+)
Comments
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> Sent: Tuesday, January 3, 2017 2:55 PM
> To: dev@dpdk.org
> Cc: Zhang, Qi Z <qi.z.zhang@intel.com>
> Subject: [dpdk-dev] [PATCH v7 25/27] net/i40e: set/clear VF stats from PF
>
> From: Qi Zhang <qi.z.zhang@intel.com>
>
> This patch add support to get/clear VF statistics from PF side.
> Two APIs are added:
> rte_pmd_i40e_get_vf_stats.
> rte_pmd_i40e_reset_vf_stats.
>
> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
> ---
> drivers/net/i40e/i40e_ethdev.c | 81
> +++++++++++++++++++++++++++++++
> drivers/net/i40e/rte_pmd_i40e.h | 41 ++++++++++++++++
> drivers/net/i40e/rte_pmd_i40e_version.map | 2 +
> 3 files changed, 124 insertions(+)
>
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index 47e03d6..be45cfa 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -10480,3 +10480,84 @@ int rte_pmd_i40e_set_vf_vlan_filter(uint8_t port,
> uint16_t vlan_id,
>
> return ret;
> }
> +
> +int
> +rte_pmd_i40e_get_vf_stats(uint8_t port,
> + uint16_t vf_id,
> + struct rte_eth_stats *stats)
> +{
> + struct rte_eth_dev *dev;
> + struct rte_eth_dev_info dev_info;
> + struct i40e_pf *pf;
> + struct i40e_vsi *vsi;
> + int ret = 0;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
> +
> + dev = &rte_eth_devices[port];
> + rte_eth_dev_info_get(port, &dev_info);
> +
> + if (vf_id >= dev_info.max_vfs)
> + return -EINVAL;
> +
> + pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
> +
> + if (vf_id > pf->vf_num - 1 || !pf->vfs) {
> + PMD_DRV_LOG(ERR, "Invalid argument.");
> + return -EINVAL;
> + }
> +
> + vsi = pf->vfs[vf_id].vsi;
> + if (!vsi)
> + return -EINVAL;
> +
> + i40e_update_vsi_stats(vsi);
> +
> + stats->ipackets = vsi->eth_stats.rx_unicast +
> + vsi->eth_stats.rx_multicast +
> + vsi->eth_stats.rx_broadcast;
> + stats->opackets = vsi->eth_stats.tx_unicast +
> + vsi->eth_stats.tx_multicast +
> + vsi->eth_stats.tx_broadcast;
> + stats->ibytes = vsi->eth_stats.rx_bytes;
> + stats->obytes = vsi->eth_stats.tx_bytes;
> + stats->ierrors = vsi->eth_stats.rx_discards;
> + stats->oerrors = vsi->eth_stats.tx_errors +
> +vsi->eth_stats.tx_discards;
> +
> + return ret;
It looks ret is not changed in this func at all.
> +}
> +
> +int
> +rte_pmd_i40e_reset_vf_stats(uint8_t port,
> + uint16_t vf_id)
> +{
> + struct rte_eth_dev *dev;
> + struct rte_eth_dev_info dev_info;
> + struct i40e_pf *pf;
> + struct i40e_vsi *vsi;
> + int ret = 0;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
> +
> + dev = &rte_eth_devices[port];
> + rte_eth_dev_info_get(port, &dev_info);
> +
> + if (vf_id >= dev_info.max_vfs)
> + return -EINVAL;
> +
> + pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
> +
> + if (vf_id > pf->vf_num - 1 || !pf->vfs) {
> + PMD_DRV_LOG(ERR, "Invalid argument.");
> + return -EINVAL;
> + }
> +
> + vsi = pf->vfs[vf_id].vsi;
> + if (!vsi)
> + return -EINVAL;
> +
> + vsi->offset_loaded = false;
> + i40e_update_vsi_stats(vsi);
> +
> + return ret;
Same comment as above.
Hi Jingjing, Qi,
> -----Original Message-----
> From: Wu, Jingjing
> Sent: Friday, January 6, 2017 9:25 AM
> To: Lu, Wenzhuo; dev@dpdk.org
> Cc: Zhang, Qi Z
> Subject: RE: [dpdk-dev] [PATCH v7 25/27] net/i40e: set/clear VF stats from PF
>
>
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wenzhuo Lu
> > Sent: Tuesday, January 3, 2017 2:55 PM
> > To: dev@dpdk.org
> > Cc: Zhang, Qi Z <qi.z.zhang@intel.com>
> > Subject: [dpdk-dev] [PATCH v7 25/27] net/i40e: set/clear VF stats from
> > PF
> >
> > From: Qi Zhang <qi.z.zhang@intel.com>
> >
> > This patch add support to get/clear VF statistics from PF side.
> > Two APIs are added:
> > rte_pmd_i40e_get_vf_stats.
> > rte_pmd_i40e_reset_vf_stats.
> >
> > Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
> > ---
> > drivers/net/i40e/i40e_ethdev.c | 81
> > +++++++++++++++++++++++++++++++
> > drivers/net/i40e/rte_pmd_i40e.h | 41 ++++++++++++++++
> > drivers/net/i40e/rte_pmd_i40e_version.map | 2 +
> > 3 files changed, 124 insertions(+)
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > b/drivers/net/i40e/i40e_ethdev.c index 47e03d6..be45cfa 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -10480,3 +10480,84 @@ int rte_pmd_i40e_set_vf_vlan_filter(uint8_t
> > port, uint16_t vlan_id,
> >
> > return ret;
> > }
> > +
> > +int
> > +rte_pmd_i40e_get_vf_stats(uint8_t port,
> > + uint16_t vf_id,
> > + struct rte_eth_stats *stats)
> > +{
> > + struct rte_eth_dev *dev;
> > + struct rte_eth_dev_info dev_info;
> > + struct i40e_pf *pf;
> > + struct i40e_vsi *vsi;
> > + int ret = 0;
> > +
> > + RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
> > +
> > + dev = &rte_eth_devices[port];
> > + rte_eth_dev_info_get(port, &dev_info);
> > +
> > + if (vf_id >= dev_info.max_vfs)
> > + return -EINVAL;
> > +
> > + pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
> > +
> > + if (vf_id > pf->vf_num - 1 || !pf->vfs) {
> > + PMD_DRV_LOG(ERR, "Invalid argument.");
> > + return -EINVAL;
> > + }
> > +
> > + vsi = pf->vfs[vf_id].vsi;
> > + if (!vsi)
> > + return -EINVAL;
> > +
> > + i40e_update_vsi_stats(vsi);
> > +
> > + stats->ipackets = vsi->eth_stats.rx_unicast +
> > + vsi->eth_stats.rx_multicast +
> > + vsi->eth_stats.rx_broadcast;
> > + stats->opackets = vsi->eth_stats.tx_unicast +
> > + vsi->eth_stats.tx_multicast +
> > + vsi->eth_stats.tx_broadcast;
> > + stats->ibytes = vsi->eth_stats.rx_bytes;
> > + stats->obytes = vsi->eth_stats.tx_bytes;
> > + stats->ierrors = vsi->eth_stats.rx_discards;
> > + stats->oerrors = vsi->eth_stats.tx_errors +
> > +vsi->eth_stats.tx_discards;
> > +
> > + return ret;
>
> It looks ret is not changed in this func at all.
>
> > +}
> > +
> > +int
> > +rte_pmd_i40e_reset_vf_stats(uint8_t port,
> > + uint16_t vf_id)
> > +{
> > + struct rte_eth_dev *dev;
> > + struct rte_eth_dev_info dev_info;
> > + struct i40e_pf *pf;
> > + struct i40e_vsi *vsi;
> > + int ret = 0;
> > +
> > + RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
> > +
> > + dev = &rte_eth_devices[port];
> > + rte_eth_dev_info_get(port, &dev_info);
> > +
> > + if (vf_id >= dev_info.max_vfs)
> > + return -EINVAL;
> > +
> > + pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
> > +
> > + if (vf_id > pf->vf_num - 1 || !pf->vfs) {
> > + PMD_DRV_LOG(ERR, "Invalid argument.");
> > + return -EINVAL;
> > + }
> > +
> > + vsi = pf->vfs[vf_id].vsi;
> > + if (!vsi)
> > + return -EINVAL;
> > +
> > + vsi->offset_loaded = false;
> > + i40e_update_vsi_stats(vsi);
> > +
> > + return ret;
> Same comment as above.
I'll change it to 'return 0'. The same as above.
@@ -10480,3 +10480,84 @@ int rte_pmd_i40e_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
return ret;
}
+
+int
+rte_pmd_i40e_get_vf_stats(uint8_t port,
+ uint16_t vf_id,
+ struct rte_eth_stats *stats)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct i40e_pf *pf;
+ struct i40e_vsi *vsi;
+ int ret = 0;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+
+ if (vf_id > pf->vf_num - 1 || !pf->vfs) {
+ PMD_DRV_LOG(ERR, "Invalid argument.");
+ return -EINVAL;
+ }
+
+ vsi = pf->vfs[vf_id].vsi;
+ if (!vsi)
+ return -EINVAL;
+
+ i40e_update_vsi_stats(vsi);
+
+ stats->ipackets = vsi->eth_stats.rx_unicast +
+ vsi->eth_stats.rx_multicast +
+ vsi->eth_stats.rx_broadcast;
+ stats->opackets = vsi->eth_stats.tx_unicast +
+ vsi->eth_stats.tx_multicast +
+ vsi->eth_stats.tx_broadcast;
+ stats->ibytes = vsi->eth_stats.rx_bytes;
+ stats->obytes = vsi->eth_stats.tx_bytes;
+ stats->ierrors = vsi->eth_stats.rx_discards;
+ stats->oerrors = vsi->eth_stats.tx_errors + vsi->eth_stats.tx_discards;
+
+ return ret;
+}
+
+int
+rte_pmd_i40e_reset_vf_stats(uint8_t port,
+ uint16_t vf_id)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct i40e_pf *pf;
+ struct i40e_vsi *vsi;
+ int ret = 0;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+
+ if (vf_id > pf->vf_num - 1 || !pf->vfs) {
+ PMD_DRV_LOG(ERR, "Invalid argument.");
+ return -EINVAL;
+ }
+
+ vsi = pf->vfs[vf_id].vsi;
+ if (!vsi)
+ return -EINVAL;
+
+ vsi->offset_loaded = false;
+ i40e_update_vsi_stats(vsi);
+
+ return ret;
+}
@@ -284,4 +284,45 @@ int rte_pmd_i40e_set_vf_broadcast(uint8_t port, uint16_t vf_id,
int rte_pmd_i40e_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
uint64_t vf_mask, uint8_t on);
+/**
+ * Get VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @param stats
+ * A pointer to a structure of type *rte_eth_stats* to be filled with
+ * the values of device counters for the following set of statistics:
+ * - *ipackets* with the total of successfully received packets.
+ * - *opackets* with the total of successfully transmitted packets.
+ * - *ibytes* with the total of successfully received bytes.
+ * - *obytes* with the total of successfully transmitted bytes.
+ * - *ierrors* with the total of erroneous received packets.
+ * - *oerrors* with the total of failed transmitted packets.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+
+int rte_pmd_i40e_get_vf_stats(uint8_t port,
+ uint16_t vf_id,
+ struct rte_eth_stats *stats);
+
+/**
+ * Clear VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_reset_vf_stats(uint8_t port,
+ uint16_t vf_id);
+
#endif /* _PMD_I40E_H_ */
@@ -6,7 +6,9 @@ DPDK_2.0 {
DPDK_17.02 {
global:
+ rte_pmd_i40e_get_vf_stats;
rte_pmd_i40e_ping_vfs;
+ rte_pmd_i40e_reset_vf_stats;
rte_pmd_i40e_set_tx_loopback;
rte_pmd_i40e_set_vf_broadcast;
rte_pmd_i40e_set_vf_mac_addr;