@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
* Copyright(c) 2014 6WIND S.A.
* All rights reserved.
*
@@ -238,6 +238,9 @@ static void cmd_help_long_parsed(void *parsed_result,
"set nbcore (num)\n"
" Set number of cores.\n\n"
+ "set nbpool (num)\n"
+ " Set number of VMDq pools.\n\n"
+
"set coremask (mask)\n"
" Set the forwarding cores hexadecimal mask.\n\n"
@@ -629,6 +632,9 @@ static void cmd_help_long_parsed(void *parsed_result,
" pfc (on|off)\n"
" Set the DCB mode.\n\n"
+ "port config (port_id) vmdq\n"
+ " Configure VMDq for a port.\n\n"
+
"port config all burst (value)\n"
" Set the number of packets per burst.\n\n"
@@ -2322,6 +2328,61 @@ cmdline_parse_inst_t cmd_config_dcb = {
},
};
+/* *** Configure VMDq *** */
+struct cmd_config_vmdq {
+ cmdline_fixed_string_t port;
+ cmdline_fixed_string_t config;
+ uint8_t port_id;
+ cmdline_fixed_string_t vmdq;
+};
+
+static void
+cmd_config_vmdq_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_config_vmdq *res = parsed_result;
+ portid_t port_id = res->port_id;
+ struct rte_port *port;
+ int ret;
+
+ port = &ports[port_id];
+ /** Check if the port is not started **/
+ if (port->port_status != RTE_PORT_STOPPED) {
+ printf("Please stop port %d first\n", port_id);
+ return;
+ }
+
+ ret = init_port_vmdq_config(port_id);
+ if (ret != 0) {
+ printf("Cannot configure VMDQ for port %d.\n", port_id);
+ return;
+ }
+ cmd_reconfig_device_queue(port_id, 0, 0);
+}
+
+cmdline_parse_token_string_t cmd_config_vmdq_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_vmdq, port, "port");
+cmdline_parse_token_string_t cmd_config_vmdq_config =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_vmdq, config, "config");
+cmdline_parse_token_num_t cmd_config_vmdq_port_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_config_vmdq, port_id, UINT8);
+cmdline_parse_token_string_t cmd_config_vmdq_vmdq =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_vmdq, vmdq, "vmdq");
+
+cmdline_parse_inst_t cmd_config_vmdq = {
+ .f = cmd_config_vmdq_parsed,
+ .data = NULL,
+ .help_str = "port config <port-id> vmdq",
+ .tokens = {
+ (void *)&cmd_config_vmdq_port,
+ (void *)&cmd_config_vmdq_config,
+ (void *)&cmd_config_vmdq_port_id,
+ (void *)&cmd_config_vmdq_vmdq,
+ NULL,
+ },
+};
+
/* *** configure number of packets per burst *** */
struct cmd_config_burst {
cmdline_fixed_string_t port;
@@ -2722,7 +2783,7 @@ cmdline_parse_inst_t cmd_set_fwd_mask = {
};
/*
- * SET NBPORT, NBCORE, PACKET BURST, and VERBOSE LEVEL CONFIGURATION
+ * SET NBPORT, NBCORE, NBPOOL, PACKET BURST, and VERBOSE LEVEL CONFIGURATION
*/
struct cmd_set_result {
cmdline_fixed_string_t set;
@@ -2741,6 +2802,8 @@ static void cmd_set_parsed(void *parsed_result,
} else if (!strcmp(res->what, "nbcore")) {
set_fwd_lcores_number(res->value);
fwd_config_setup();
+ } else if (!strcmp(res->what, "nbpool")) {
+ set_vmdq_pool_number(res->value);
} else if (!strcmp(res->what, "burst"))
set_nb_pkt_per_burst(res->value);
else if (!strcmp(res->what, "verbose"))
@@ -2751,14 +2814,14 @@ cmdline_parse_token_string_t cmd_set_set =
TOKEN_STRING_INITIALIZER(struct cmd_set_result, set, "set");
cmdline_parse_token_string_t cmd_set_what =
TOKEN_STRING_INITIALIZER(struct cmd_set_result, what,
- "nbport#nbcore#burst#verbose");
+ "nbport#nbcore#nbpool#burst#verbose");
cmdline_parse_token_num_t cmd_set_value =
TOKEN_NUM_INITIALIZER(struct cmd_set_result, value, UINT16);
cmdline_parse_inst_t cmd_set_numbers = {
.f = cmd_set_parsed,
.data = NULL,
- .help_str = "set nbport|nbcore|burst|verbose <value>",
+ .help_str = "set nbport|nbcore|nbpool|burst|verbose <value>",
.tokens = {
(void *)&cmd_set_set,
(void *)&cmd_set_what,
@@ -12462,6 +12525,7 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_link_flow_control_set_autoneg,
(cmdline_parse_inst_t *)&cmd_priority_flow_control_set,
(cmdline_parse_inst_t *)&cmd_config_dcb,
+ (cmdline_parse_inst_t *)&cmd_config_vmdq,
(cmdline_parse_inst_t *)&cmd_read_reg,
(cmdline_parse_inst_t *)&cmd_read_reg_bit_field,
(cmdline_parse_inst_t *)&cmd_read_reg_bit,
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -2063,6 +2063,18 @@ set_fwd_lcores_number(uint16_t nb_lc)
}
void
+set_vmdq_pool_number(uint32_t nbpool)
+{
+ if (nbpool <= ETH_64_POOLS) {
+ nb_pools = nbpool;
+ printf("Number of VMDq pools set to %u\n", nb_pools);
+ } else {
+ printf("invalid nbpool %u ignored\n", nbpool);
+ return;
+ }
+}
+
+void
set_fwd_ports_list(unsigned int *portlist, unsigned int nb_pt)
{
unsigned int i;
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -90,7 +90,7 @@ usage(char* progname)
"[--help|-h] | [--auto-start|-a] | ["
"--coremask=COREMASK --portmask=PORTMASK --numa "
"--mbuf-size= | --total-num-mbufs= | "
- "--nb-cores= | --nb-ports= | "
+ "--nb-cores= | --nb-ports= | --nb-pools |"
#ifdef RTE_LIBRTE_CMDLINE
"--eth-peers-configfile= | "
"--eth-peer=X,M:M:M:M:M:M | "
@@ -196,6 +196,7 @@ usage(char* progname)
" or total packet length.\n");
printf(" --disable-link-check: disable check on link status when "
"starting/stopping ports.\n");
+ printf(" --nb-pools=N: set the number of VMDq pools (N < 64).\n");
}
#ifdef RTE_LIBRTE_CMDLINE
@@ -561,6 +562,7 @@ launch_args_parse(int argc, char** argv)
{ "no-flush-rx", 0, 0, 0 },
{ "txpkts", 1, 0, 0 },
{ "disable-link-check", 0, 0, 0 },
+ { "nb-pools", 1, 0, 0 },
{ 0, 0, 0, 0 },
};
@@ -978,7 +980,14 @@ launch_args_parse(int argc, char** argv)
no_flush_rx = 1;
if (!strcmp(lgopts[opt_idx].name, "disable-link-check"))
no_link_check = 1;
-
+ if (!strcmp(lgopts[opt_idx].name, "nb-pools")) {
+ n = atoi(optarg);
+ if (n <= ETH_64_POOLS)
+ nb_pools = (uint32_t)n;
+ else
+ rte_exit(EXIT_FAILURE,
+ "Invalid number of pools %d\n", n);
+ }
break;
case 'h':
usage(argv[0]);
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -1888,13 +1888,229 @@ uint8_t port_is_bonding_slave(portid_t slave_pid)
return port->slave_flag;
}
+static const struct rte_eth_conf vmdq_conf_default = {
+ .rxmode = {
+ .mq_mode = ETH_MQ_RX_VMDQ_ONLY,
+ .split_hdr_size = 0,
+ .header_split = 0, /**< Header Split disabled */
+ .hw_ip_checksum = 0, /**< IP checksum offload disabled */
+ .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
+ },
+
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ },
+ .rx_adv_conf = {
+ /*
+ * should be overridden separately in code with
+ * appropriate values
+ */
+ .vmdq_rx_conf = {
+ .nb_queue_pools = ETH_8_POOLS,
+ .enable_default_pool = 0,
+ .default_pool = 0,
+ .nb_pool_maps = 0,
+ .pool_map = {{0, 0},},
+ },
+ },
+};
+
const uint16_t vlan_tags[] = {
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+};
+
+const uint16_t num_vlans = RTE_DIM(vlan_tags);
+static uint16_t num_pf_queues, num_vmdq_queues;
+static uint16_t vmdq_pool_base, vmdq_queue_base;
+static uint32_t num_queues;
+/* number of pools (if user does not specify any, 8 by default */
+uint32_t nb_pools = ETH_8_POOLS;
+/* ethernet addresses of ports */
+static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
+/* pool mac addr template, pool mac addr is like: 52 54 00 12 port# pool# */
+static struct ether_addr pool_addr_template = {
+ .addr_bytes = {0x52, 0x54, 0x00, 0x12, 0x00, 0x00}
};
+/**
+ * Builds up the correct configuration for vmdq based on the vlan tags array
+ * given above, and determine the queue number and pool map number according to
+ * valid pool number
+ */
+static int
+get_eth_vmdq_conf(struct rte_eth_conf *eth_conf, uint32_t nb_pools)
+{
+ struct rte_eth_vmdq_rx_conf conf;
+ uint8_t i;
+
+ conf.nb_queue_pools = (enum rte_eth_nb_pools)nb_pools;
+ conf.nb_pool_maps = nb_pools;
+ conf.enable_default_pool = 0;
+ conf.default_pool = 0; /* set explicit value, even if not used */
+
+ for (i = 0; i < conf.nb_pool_maps; i++) {
+ conf.pool_map[i].vlan_id = vlan_tags[i];
+ conf.pool_map[i].pools = (1UL << (i % nb_pools));
+ }
+
+ (void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf)));
+ (void)(rte_memcpy(ð_conf->rx_adv_conf.vmdq_rx_conf, &conf,
+ sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf)));
+ return 0;
+}
+
+/**
+ * Configures VMDq for a given port using global settings.
+ */
+int
+init_port_vmdq_config(uint8_t port)
+{
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf *rxconf;
+ struct rte_eth_conf port_conf;
+ struct rte_mempool *mbp;
+ uint16_t rx_queues, tx_queues;
+ const uint16_t rx_queue_size = RTE_TEST_RX_DESC_DEFAULT;
+ const uint16_t tx_queue_size = RTE_TEST_TX_DESC_DEFAULT;
+ int retval;
+ uint16_t q;
+ uint16_t queues_per_pool;
+ uint32_t max_nb_pools;
+
+ if (port >= rte_eth_dev_count())
+ return -1;
+ /**
+ * The max pool number from dev_info will be used to validate the pool
+ * number.
+ */
+ rte_eth_dev_info_get(port, &dev_info);
+ max_nb_pools = (uint32_t)dev_info.max_vmdq_pools;
+ /**
+ * We allow to process part of VMDQ pools specified by nb_pools in
+ * command line.
+ */
+ if (nb_pools > max_nb_pools) {
+ printf("nb_pools %d > max_nb_pools %d\n",
+ nb_pools, max_nb_pools);
+ return -1;
+ }
+
+ retval = get_eth_vmdq_conf(&port_conf, max_nb_pools);
+ if (retval < 0)
+ return retval;
+
+ /*
+ * NIC queues are divided into pf queues and vmdq queues.
+ */
+ /* There is assumption here all ports have the same configuration! */
+ num_pf_queues = dev_info.max_rx_queues - dev_info.vmdq_queue_num;
+ queues_per_pool = dev_info.vmdq_queue_num / dev_info.max_vmdq_pools;
+ num_vmdq_queues = nb_pools * queues_per_pool;
+ num_queues = num_pf_queues + num_vmdq_queues;
+ vmdq_queue_base = dev_info.vmdq_queue_base;
+ vmdq_pool_base = dev_info.vmdq_pool_base;
+
+ printf("num_pf_queues: %u nb_pools: %u\n", num_pf_queues, nb_pools);
+ printf("each vmdq pool has %u queues\n", queues_per_pool);
+ printf("vmdq_queue_base: %d vmdq_pool_base: %d\n", vmdq_queue_base, vmdq_pool_base);
+
+ /*
+ * All queues including pf queues are setup.
+ * This is because VMDQ queues doesn't always start from zero, and the
+ * PMD layer doesn't support selectively initialising part of rx/tx
+ * queues.
+ */
+ rx_queues = (uint16_t)dev_info.max_rx_queues;
+ tx_queues = (uint16_t)dev_info.max_tx_queues;
+ retval = rte_eth_dev_configure(port, rx_queues, tx_queues, &port_conf);
+ if (retval < 0) {
+ printf("rte_eth_dev_configure %d failed\n", retval);
+ return retval;
+ }
+
+ mbp = mbuf_pool_find(0);
+ if (mbp == NULL) {
+ printf("mbuf_pool_find failed\n");
+ return -1;
+ }
+
+ rte_eth_dev_info_get(port, &dev_info);
+ rxconf = &dev_info.default_rxconf;
+ rxconf->rx_drop_en = 1;
+ for (q = 0; q < rx_queues; q++) {
+ retval = rte_eth_rx_queue_setup(port, q, rx_queue_size,
+ rte_eth_dev_socket_id(port),
+ rxconf,
+ mbp);
+ if (retval < 0) {
+ printf("initialise rx queue %d failed\n", q);
+ return retval;
+ }
+ }
+
+ for (q = 0; q < tx_queues; q++) {
+ retval = rte_eth_tx_queue_setup(port, q, tx_queue_size,
+ rte_eth_dev_socket_id(port),
+ NULL);
+ if (retval < 0) {
+ printf("initialise tx queue %d failed\n", q);
+ return retval;
+ }
+ }
+
+ retval = rte_eth_dev_start(port);
+ if (retval < 0) {
+ printf("rte_eth_dev_start %d failed\n", retval);
+ return retval;
+ }
+ printf("port %d started\n", port);
+
+ rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+
+ printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+ " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n", port,
+ vmdq_ports_eth_addr[port].addr_bytes[0],
+ vmdq_ports_eth_addr[port].addr_bytes[1],
+ vmdq_ports_eth_addr[port].addr_bytes[2],
+ vmdq_ports_eth_addr[port].addr_bytes[3],
+ vmdq_ports_eth_addr[port].addr_bytes[4],
+ vmdq_ports_eth_addr[port].addr_bytes[5]);
+
+ /*
+ * Set mac for each pool.
+ * There is no default mac for the pools in i40.
+ * Removes this after i40e fixes this issue.
+ */
+ for (q = 0; q < nb_pools; q++) {
+ struct ether_addr mac;
+
+ mac = pool_addr_template;
+ mac.addr_bytes[4] = port;
+ mac.addr_bytes[5] = q;
+ printf("Port %u vmdq pool %u set mac %02x:%02x:%02x:%02x:%02x:%02x\n",
+ port, q,
+ mac.addr_bytes[0], mac.addr_bytes[1],
+ mac.addr_bytes[2], mac.addr_bytes[3],
+ mac.addr_bytes[4], mac.addr_bytes[5]);
+ retval = rte_eth_dev_mac_addr_add(port, &mac,
+ q + vmdq_pool_base);
+ if (retval) {
+ printf("mac addr add failed at pool %d\n", q);
+ return retval;
+ }
+ }
+
+ return 0;
+}
+
static int
get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
enum dcb_mode_enable dcb_mode,
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ * Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -368,6 +368,8 @@ extern queueid_t nb_txq;
extern uint16_t nb_rxd;
extern uint16_t nb_txd;
+extern uint32_t nb_pools;
+
extern int16_t rx_free_thresh;
extern int8_t rx_drop_en;
extern int16_t tx_free_thresh;
@@ -546,6 +548,8 @@ void set_fwd_ports_mask(uint64_t portmask);
void set_fwd_ports_number(uint16_t nb_pt);
int port_is_forwarding(portid_t port_id);
+void set_vmdq_pool_number(uint32_t nbpool);
+
void rx_vlan_strip_set(portid_t port_id, int on);
void rx_vlan_strip_set_on_queue(portid_t port_id, uint16_t queue_id, int on);
@@ -582,6 +586,7 @@ uint8_t port_is_bonding_slave(portid_t slave_pid);
int init_port_dcb_config(portid_t pid, enum dcb_mode_enable dcb_mode,
enum rte_eth_nb_tcs num_tcs,
uint8_t pfc_en);
+int init_port_vmdq_config(uint8_t port);
int start_port(portid_t pid);
void stop_port(portid_t pid);
void close_port(portid_t pid);
@@ -1,5 +1,5 @@
.. BSD LICENSE
- Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -360,6 +360,15 @@ set nbport (num)
This is equivalent to the ``--nb-ports`` command-line option.
+set nbpool
+~~~~~~~~~~
+
+Set the number of pools used by the application::
+
+ testpmd> set nbpool (num)
+
+This is equivalent to the ``--nb-pools`` command-line option.
+
set nbcore
~~~~~~~~~~
@@ -1438,6 +1447,13 @@ Set the DCB mode for an individual port::
The traffic class should be 4 or 8.
+port config - VMDq
+~~~~~~~~~~~~~~~~~~
+
+Configure VMDq for an individual port::
+
+ testpmd> port config (port_id) vmdq
+
port config - Burst
~~~~~~~~~~~~~~~~~~~