[dpdk-dev,v5] net/kni: add KNI PMD
Checks
Commit Message
Add KNI PMD which wraps librte_kni for ease of use.
KNI PMD can be used as any regular PMD to send / receive packets to the
Linux networking stack.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
v5:
* add kvargs "no_request_thread" to disable a specific pthread creation
to handle control requests.
* add documentation
v4:
* allow only single queue
* use driver.name as name
v3:
* rebase on top of latest master
v2:
* updated driver name eth_kni -> net_kni
---
MAINTAINERS | 5 +
config/common_base | 1 +
config/common_linuxapp | 1 +
doc/guides/nics/features/kni.ini | 7 +
doc/guides/nics/index.rst | 1 +
doc/guides/nics/kni.rst | 197 ++++++++++++
drivers/net/Makefile | 1 +
drivers/net/kni/Makefile | 64 ++++
drivers/net/kni/rte_eth_kni.c | 515 ++++++++++++++++++++++++++++++++
drivers/net/kni/rte_pmd_kni_version.map | 4 +
mk/rte.app.mk | 10 +-
11 files changed, 801 insertions(+), 5 deletions(-)
create mode 100644 doc/guides/nics/features/kni.ini
create mode 100644 doc/guides/nics/kni.rst
create mode 100644 drivers/net/kni/Makefile
create mode 100644 drivers/net/kni/rte_eth_kni.c
create mode 100644 drivers/net/kni/rte_pmd_kni_version.map
Comments
> -----Original Message-----
> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
> Sent: Monday, January 30, 2017 8:58 AM
> To: Thomas Monjalon <thomas.monjalon@6wind.com>; Yong Wang
> <yongwang@vmware.com>
> Cc: dev@dpdk.org; Ferruh Yigit <ferruh.yigit@intel.com>
> Subject: [PATCH v5] net/kni: add KNI PMD
>
> Add KNI PMD which wraps librte_kni for ease of use.
>
> KNI PMD can be used as any regular PMD to send / receive packets to the
> Linux networking stack.
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
> ---
Looks good except a few typos in the documentation added.
Reviewed-by: Yong Wang <yongwang@vmware.com>
>
> v5:
> * add kvargs "no_request_thread" to disable a specific pthread creation
> to handle control requests.
> * add documentation
>
> v4:
> * allow only single queue
> * use driver.name as name
>
> v3:
> * rebase on top of latest master
>
> v2:
> * updated driver name eth_kni -> net_kni
> ---
> MAINTAINERS | 5 +
> config/common_base | 1 +
> config/common_linuxapp | 1 +
> doc/guides/nics/features/kni.ini | 7 +
> doc/guides/nics/index.rst | 1 +
> doc/guides/nics/kni.rst | 197 ++++++++++++
> drivers/net/Makefile | 1 +
> drivers/net/kni/Makefile | 64 ++++
> drivers/net/kni/rte_eth_kni.c | 515
> ++++++++++++++++++++++++++++++++
> drivers/net/kni/rte_pmd_kni_version.map | 4 +
> mk/rte.app.mk | 10 +-
> 11 files changed, 801 insertions(+), 5 deletions(-)
> create mode 100644 doc/guides/nics/features/kni.ini
> create mode 100644 doc/guides/nics/kni.rst
> create mode 100644 drivers/net/kni/Makefile
> create mode 100644 drivers/net/kni/rte_eth_kni.c
> create mode 100644 drivers/net/kni/rte_pmd_kni_version.map
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f071138..8eb83f5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -404,6 +404,11 @@ M: Keith Wiles <keith.wiles@intel.com>
> F: drivers/net/tap/
> F: doc/guides/nics/tap.rst
>
> +KNI PMD
> +M: Ferruh Yigit <ferruh.yigit@intel.com>
> +F: drivers/net/kni/
> +F: doc/guides/nics/kni.rst
> +
> Ring PMD
> M: Bruce Richardson <bruce.richardson@intel.com>
> F: drivers/net/ring/
> diff --git a/config/common_base b/config/common_base
> index 61efb87..2e1bbd5 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -576,6 +576,7 @@ CONFIG_RTE_PIPELINE_STATS_COLLECT=n
> # Compile librte_kni
> #
> CONFIG_RTE_LIBRTE_KNI=n
> +CONFIG_RTE_LIBRTE_PMD_KNI=n
> CONFIG_RTE_KNI_KMOD=n
> CONFIG_RTE_KNI_KMOD_ETHTOOL=n
> CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
> diff --git a/config/common_linuxapp b/config/common_linuxapp
> index 00ebaac..d03a60a 100644
> --- a/config/common_linuxapp
> +++ b/config/common_linuxapp
> @@ -39,6 +39,7 @@ CONFIG_RTE_EAL_IGB_UIO=y
> CONFIG_RTE_EAL_VFIO=y
> CONFIG_RTE_KNI_KMOD=y
> CONFIG_RTE_LIBRTE_KNI=y
> +CONFIG_RTE_LIBRTE_PMD_KNI=y
> CONFIG_RTE_LIBRTE_VHOST=y
> CONFIG_RTE_LIBRTE_PMD_VHOST=y
> CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
> diff --git a/doc/guides/nics/features/kni.ini
> b/doc/guides/nics/features/kni.ini
> new file mode 100644
> index 0000000..6deb66a
> --- /dev/null
> +++ b/doc/guides/nics/features/kni.ini
> @@ -0,0 +1,7 @@
> +;
> +; Supported features of the 'kni' network poll mode driver.
> +;
> +; Refer to default.ini for the full list of available PMD features.
> +;
> +[Features]
> +Usage doc = Y
> diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
> index 87f9334..5248625 100644
> --- a/doc/guides/nics/index.rst
> +++ b/doc/guides/nics/index.rst
> @@ -46,6 +46,7 @@ Network Interface Controller Drivers
> i40e
> ixgbe
> intel_vf
> + kni
> mlx4
> mlx5
> nfp
> diff --git a/doc/guides/nics/kni.rst b/doc/guides/nics/kni.rst
> new file mode 100644
> index 0000000..2e2032b
> --- /dev/null
> +++ b/doc/guides/nics/kni.rst
> @@ -0,0 +1,197 @@
> +.. BSD LICENSE
> + Copyright(c) 2017 Intel Corporation. All rights reserved.
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + * Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> + * Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> + * Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +KNI Poll Mode Driver
> +======================
> +
> +KNI PMD is wrapper to the :ref:`librte_kni <kni>` library.
> +
> +This PMD enables using KNI without having a KNI specific application,
> +any forwarding application can use PMD interface for KNI.
> +
> +Sending packets to the any DPDK controlled interface or sending to the
"to the any DPDK" should be "too any DPDK"
> +Linux networking stack will be transparent to the DPDK application.
> +
> +To create a KNI device ``net_kni#`` device name should be used, and this
> +will create ``kni#`` Linux virtual network interface.
> +
> +There is no physical device backend for the virtual KNI device.
> +
> +Packets sent to the KNI Linux interface will be received by the DPDK
> +application, and DPDK application may forward packets to a physical NIC
> +or to a virtual device (like another KNI interface or PCAP interface).
> +
> +To forward any traffic from physical NIC to the Linux networking stack,
> +an application should control a physical port and create one virtual KNI port,
> +and forward between two.
> +
> +Using this PMD requires KNI kernel module be inserted.
> +
> +
> +Usage
> +-----
> +
> +EAL ``--vdev`` argument can be used to create KNI device instance, like::
> +
> + testpmd --vdev=net_kni0 --vdev=net_kn1 -- -i
> +
> +Above command will create ``kni0`` and ``kni1`` Linux network interfaces,
> +those interfaces can be controlled by standard Linux tools.
> +
> +When testpmd forwarding started, any packets send to ``kni0`` interface
s/started/starts
s/send/sent
> +forwarded to the ``kni1`` interface and vice versa.
> +
> +There is no hard limit on number of interfaces can be created.
Add "that" after "interfaces".
> +
> +
> +Default interface configuration
> +-------------------------------
> +
> +``librte_kni`` can create Linux network interfaces with different features,
> +feature set controlled by a configuration struct, and KNI PMD uses a fixed
> +configuration:
> +
> + .. code-block:: console
> +
> + Interface name: kni#
> + force bind kernel thread to a core : NO
> + mbuf size: MAX_PACKET_SZ
> +
> +KNI control path is not supported with the PMD, since there is no physical
> +backend device by default.
> +
> +
> +PMD arguments
> +-------------
> +
> +``no_request_thread``, by default PMD creates a phtread for each KNI
> interface
> +to handle Linux network interface control commands, like ``ifconfig kni0 up``
> +
> +With ``no_request_thread`` option, pthread is not created and control
> commands
> +not handled by PMD.
> +
> +By default request thread is enabled. And this argument should not be used
> +most of the time, unless this PMD used with customized DPDK application
> to handle
> +requests itself.
> +
> +Argument usage::
> +
> + testpmd --vdev "net_kni0,no_request_thread=1" -- -i
> +
> +
> +PMD log messages
> +----------------
> +
> +If KNI kernel module (rte_kni.ko) not inserted, following error log printed::
> +
> + "KNI: KNI subsystem has not been initialized. Invoke rte_kni_init() first"
> +
> +
> +PMD testing
> +-----------
> +
> +It is possible to test PMD quicly using KNI kernel module loopback feature:
s/quicly/quickly
> +
> +* Insert KNI kernel module with loopback support:
> +
> + .. code-block:: console
> +
> + insmod build/kmod/rte_kni.ko lo_mode=lo_mode_fifo_skb
> +
> +* Start testpmd with no physical device but two KNI virtual devices:
> +
> + .. code-block:: console
> +
> + ./testpmd --vdev net_kni0 --vdev net_kni1 -- -i
> +
> + .. code-block:: console
> +
> + ...
> + Configuring Port 0 (socket 0)
> + KNI: pci: 00:00:00 c580:b8
> + Port 0: 1A:4A:5B:7C:A2:8C
> + Configuring Port 1 (socket 0)
> + KNI: pci: 00:00:00 600:b9
> + Port 1: AE:95:21:07:93:DD
> + Checking link statuses...
> + Port 0 Link Up - speed 10000 Mbps - full-duplex
> + Port 1 Link Up - speed 10000 Mbps - full-duplex
> + Done
> + testpmd>
> +
> +* Observe Linux interfaces
> +
> + .. code-block:: console
> +
> + $ ifconfig kni0 && ifconfig kni1
> + kni0: flags=4098<BROADCAST,MULTICAST> mtu 1500
> + ether ae:8e:79:8e:9b:c8 txqueuelen 1000 (Ethernet)
> + RX packets 0 bytes 0 (0.0 B)
> + RX errors 0 dropped 0 overruns 0 frame 0
> + TX packets 0 bytes 0 (0.0 B)
> + TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
> +
> + kni1: flags=4098<BROADCAST,MULTICAST> mtu 1500
> + ether 9e:76:43:53:3e:9b txqueuelen 1000 (Ethernet)
> + RX packets 0 bytes 0 (0.0 B)
> + RX errors 0 dropped 0 overruns 0 frame 0
> + TX packets 0 bytes 0 (0.0 B)
> + TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
> +
> +
> +* Start forwarding with tx_first:
> +
> + .. code-block:: console
> +
> + testpmd> start tx_first
> +
> +* Quit and check forwarding stats:
> +
> + .. code-block:: console
> +
> + testpmd> quit
> + Telling cores to stop...
> + Waiting for lcores to finish...
> +
> + ---------------------- Forward statistics for port 0 ----------------------
> + RX-packets: 35637905 RX-dropped: 0 RX-total: 35637905
> + TX-packets: 35637947 TX-dropped: 0 TX-total: 35637947
> + ----------------------------------------------------------------------------
> +
> + ---------------------- Forward statistics for port 1 ----------------------
> + RX-packets: 35637915 RX-dropped: 0 RX-total: 35637915
> + TX-packets: 35637937 TX-dropped: 0 TX-total: 35637937
> + ----------------------------------------------------------------------------
> +
> + +++++++++++++++ Accumulated forward statistics for all
> ports+++++++++++++++
> + RX-packets: 71275820 RX-dropped: 0 RX-total: 71275820
> + TX-packets: 71275884 TX-dropped: 0 TX-total: 71275884
> +
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++
> +
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 40fc333..8fd6745 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -41,6 +41,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
> DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
> DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
> DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe
> +DIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += kni
> DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4
> DIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5
> DIRS-$(CONFIG_RTE_LIBRTE_MPIPE_PMD) += mpipe
> diff --git a/drivers/net/kni/Makefile b/drivers/net/kni/Makefile
> new file mode 100644
> index 0000000..b3017b1
> --- /dev/null
> +++ b/drivers/net/kni/Makefile
> @@ -0,0 +1,64 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2017 Intel Corporation. All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +#
> +# library name
> +#
> +LIB = librte_pmd_kni.a
> +
> +CFLAGS += -O3
> +CFLAGS += $(WERROR_FLAGS)
> +LDLIBS += -lpthread
> +
> +EXPORT_MAP := rte_pmd_kni_version.map
> +
> +LIBABIVER := 1
> +
> +#
> +# all source are stored in SRCS-y
> +#
> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += rte_eth_kni.c
> +
> +#
> +# Export include files
> +#
> +SYMLINK-y-include +=
> +
> +# this lib depends upon:
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_eal
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_ether
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_kni
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_kvargs
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_mbuf
> +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_mempool
> +
> +include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/drivers/net/kni/rte_eth_kni.c b/drivers/net/kni/rte_eth_kni.c
> new file mode 100644
> index 0000000..59205e7
> --- /dev/null
> +++ b/drivers/net/kni/rte_eth_kni.c
> @@ -0,0 +1,515 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2017 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> + */
> +
> +#include <fcntl.h>
> +#include <pthread.h>
> +#include <unistd.h>
> +
> +#include <rte_ethdev.h>
> +#include <rte_kni.h>
> +#include <rte_kvargs.h>
> +#include <rte_malloc.h>
> +#include <rte_vdev.h>
> +
> +/* Only single queue supported */
> +#define KNI_MAX_QUEUE_PER_PORT 1
> +
> +#define MAX_PACKET_SZ 2048
> +#define MAX_KNI_PORTS 8
> +
> +#define ETH_KNI_NO_REQUEST_THREAD_ARG "no_request_thread"
> +static const char * const valid_arguments[] = {
> + ETH_KNI_NO_REQUEST_THREAD_ARG,
> + NULL
> +};
> +
> +struct eth_kni_args {
> + int no_request_thread;
> +};
> +
> +struct pmd_queue_stats {
> + uint64_t pkts;
> + uint64_t bytes;
> + uint64_t err_pkts;
> +};
> +
> +struct pmd_queue {
> + struct pmd_internals *internals;
> + struct rte_mempool *mb_pool;
> +
> + struct pmd_queue_stats rx;
> + struct pmd_queue_stats tx;
> +};
> +
> +struct pmd_internals {
> + struct rte_kni *kni;
> + int is_kni_started;
> +
> + pthread_t thread;
> + int stop_thread;
> + int no_request_thread;
> +
> + struct ether_addr eth_addr;
> +
> + struct pmd_queue rx_queues[KNI_MAX_QUEUE_PER_PORT];
> + struct pmd_queue tx_queues[KNI_MAX_QUEUE_PER_PORT];
> +};
> +
> +static const struct rte_eth_link pmd_link = {
> + .link_speed = ETH_SPEED_NUM_10G,
> + .link_duplex = ETH_LINK_FULL_DUPLEX,
> + .link_status = ETH_LINK_DOWN,
> + .link_autoneg = ETH_LINK_SPEED_AUTONEG,
> +};
> +static int is_kni_initialized;
> +
> +static uint16_t
> +eth_kni_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
> +{
> + struct pmd_queue *kni_q = q;
> + struct rte_kni *kni = kni_q->internals->kni;
> + uint16_t nb_pkts;
> +
> + nb_pkts = rte_kni_rx_burst(kni, bufs, nb_bufs);
> +
> + kni_q->rx.pkts += nb_pkts;
> + kni_q->rx.err_pkts += nb_bufs - nb_pkts;
> +
> + return nb_pkts;
> +}
> +
> +static uint16_t
> +eth_kni_tx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
> +{
> + struct pmd_queue *kni_q = q;
> + struct rte_kni *kni = kni_q->internals->kni;
> + uint16_t nb_pkts;
> +
> + nb_pkts = rte_kni_tx_burst(kni, bufs, nb_bufs);
> +
> + kni_q->tx.pkts += nb_pkts;
> + kni_q->tx.err_pkts += nb_bufs - nb_pkts;
> +
> + return nb_pkts;
> +}
> +
> +static void *
> +kni_handle_request(void *param)
> +{
> + struct pmd_internals *internals = param;
> +#define MS 1000
> +
> + while (!internals->stop_thread) {
> + rte_kni_handle_request(internals->kni);
> + usleep(500 * MS);
> + }
> +
> + return param;
> +}
> +
> +static int
> +eth_kni_start(struct rte_eth_dev *dev)
> +{
> + struct pmd_internals *internals = dev->data->dev_private;
> + uint16_t port_id = dev->data->port_id;
> + struct rte_mempool *mb_pool;
> + struct rte_kni_conf conf;
> + const char *name = dev->data->name + 4; /* remove net_ */
> +
> + snprintf(conf.name, RTE_KNI_NAMESIZE, "%s", name);
> + conf.force_bind = 0;
> + conf.group_id = port_id;
> + conf.mbuf_size = MAX_PACKET_SZ;
> + mb_pool = internals->rx_queues[0].mb_pool;
> +
> + internals->kni = rte_kni_alloc(mb_pool, &conf, NULL);
> + if (internals->kni == NULL) {
> + RTE_LOG(ERR, PMD,
> + "Fail to create kni interface for port: %d\n",
> + port_id);
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static int
> +eth_kni_dev_start(struct rte_eth_dev *dev)
> +{
> + struct pmd_internals *internals = dev->data->dev_private;
> + int ret;
> +
> + if (internals->is_kni_started == 0) {
> + ret = eth_kni_start(dev);
> + if (ret)
> + return -1;
> + internals->is_kni_started = 1;
> + }
> +
> + if (internals->no_request_thread == 0) {
> + ret = pthread_create(&internals->thread, NULL,
> + kni_handle_request, internals);
> + if (ret) {
> + RTE_LOG(ERR, PMD,
> + "Fail to create kni request thread\n");
> + return -1;
> + }
> + }
> +
> + dev->data->dev_link.link_status = 1;
> +
> + return 0;
> +}
> +
> +static void
> +eth_kni_dev_stop(struct rte_eth_dev *dev)
> +{
> + struct pmd_internals *internals = dev->data->dev_private;
> + int ret;
> +
> + if (internals->no_request_thread == 0) {
> + internals->stop_thread = 1;
> +
> + ret = pthread_cancel(internals->thread);
> + if (ret)
> + RTE_LOG(ERR, PMD, "Can't cancel the thread\n");
> +
> + ret = pthread_join(internals->thread, NULL);
> + if (ret)
> + RTE_LOG(ERR, PMD, "Can't join the thread\n");
> +
> + internals->stop_thread = 0;
> + }
> +
> + dev->data->dev_link.link_status = 0;
> +}
> +
> +static int
> +eth_kni_dev_configure(struct rte_eth_dev *dev __rte_unused)
> +{
> + return 0;
> +}
> +
> +static void
> +eth_kni_dev_info(struct rte_eth_dev *dev __rte_unused,
> + struct rte_eth_dev_info *dev_info)
> +{
> + dev_info->max_mac_addrs = 1;
> + dev_info->max_rx_pktlen = UINT32_MAX;
> + dev_info->max_rx_queues = KNI_MAX_QUEUE_PER_PORT;
> + dev_info->max_tx_queues = KNI_MAX_QUEUE_PER_PORT;
> + dev_info->min_rx_bufsize = 0;
> + dev_info->pci_dev = NULL;
> +}
> +
> +static int
> +eth_kni_rx_queue_setup(struct rte_eth_dev *dev,
> + uint16_t rx_queue_id,
> + uint16_t nb_rx_desc __rte_unused,
> + unsigned int socket_id __rte_unused,
> + const struct rte_eth_rxconf *rx_conf __rte_unused,
> + struct rte_mempool *mb_pool)
> +{
> + struct pmd_internals *internals = dev->data->dev_private;
> + struct pmd_queue *q;
> +
> + q = &internals->rx_queues[rx_queue_id];
> + q->internals = internals;
> + q->mb_pool = mb_pool;
> +
> + dev->data->rx_queues[rx_queue_id] = q;
> +
> + return 0;
> +}
> +
> +static int
> +eth_kni_tx_queue_setup(struct rte_eth_dev *dev,
> + uint16_t tx_queue_id,
> + uint16_t nb_tx_desc __rte_unused,
> + unsigned int socket_id __rte_unused,
> + const struct rte_eth_txconf *tx_conf __rte_unused)
> +{
> + struct pmd_internals *internals = dev->data->dev_private;
> + struct pmd_queue *q;
> +
> + q = &internals->tx_queues[tx_queue_id];
> + q->internals = internals;
> +
> + dev->data->tx_queues[tx_queue_id] = q;
> +
> + return 0;
> +}
> +
> +static void
> +eth_kni_queue_release(void *q __rte_unused)
> +{
> +}
> +
> +static int
> +eth_kni_link_update(struct rte_eth_dev *dev __rte_unused,
> + int wait_to_complete __rte_unused)
> +{
> + return 0;
> +}
> +
> +static void
> +eth_kni_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
> +{
> + unsigned long rx_packets_total = 0, rx_bytes_total = 0;
> + unsigned long tx_packets_total = 0, tx_bytes_total = 0;
> + struct rte_eth_dev_data *data = dev->data;
> + unsigned long tx_packets_err_total = 0;
> + unsigned int i, num_stats;
> + struct pmd_queue *q;
> +
> + num_stats = RTE_MIN((unsigned
> int)RTE_ETHDEV_QUEUE_STAT_CNTRS,
> + data->nb_rx_queues);
> + for (i = 0; i < num_stats; i++) {
> + q = data->rx_queues[i];
> + stats->q_ipackets[i] = q->rx.pkts;
> + stats->q_ibytes[i] = q->rx.bytes;
> + rx_packets_total += stats->q_ipackets[i];
> + rx_bytes_total += stats->q_ibytes[i];
> + }
> +
> + num_stats = RTE_MIN((unsigned
> int)RTE_ETHDEV_QUEUE_STAT_CNTRS,
> + data->nb_tx_queues);
> + for (i = 0; i < num_stats; i++) {
> + q = data->tx_queues[i];
> + stats->q_opackets[i] = q->tx.pkts;
> + stats->q_obytes[i] = q->tx.bytes;
> + stats->q_errors[i] = q->tx.err_pkts;
> + tx_packets_total += stats->q_opackets[i];
> + tx_bytes_total += stats->q_obytes[i];
> + tx_packets_err_total += stats->q_errors[i];
> + }
> +
> + stats->ipackets = rx_packets_total;
> + stats->ibytes = rx_bytes_total;
> + stats->opackets = tx_packets_total;
> + stats->obytes = tx_bytes_total;
> + stats->oerrors = tx_packets_err_total;
> +}
> +
> +static void
> +eth_kni_stats_reset(struct rte_eth_dev *dev)
> +{
> + struct rte_eth_dev_data *data = dev->data;
> + struct pmd_queue *q;
> + unsigned int i;
> +
> + for (i = 0; i < data->nb_rx_queues; i++) {
> + q = data->rx_queues[i];
> + q->rx.pkts = 0;
> + q->rx.bytes = 0;
> + }
> + for (i = 0; i < data->nb_tx_queues; i++) {
> + q = data->tx_queues[i];
> + q->tx.pkts = 0;
> + q->tx.bytes = 0;
> + q->tx.err_pkts = 0;
> + }
> +}
> +
> +static const struct eth_dev_ops eth_kni_ops = {
> + .dev_start = eth_kni_dev_start,
> + .dev_stop = eth_kni_dev_stop,
> + .dev_configure = eth_kni_dev_configure,
> + .dev_infos_get = eth_kni_dev_info,
> + .rx_queue_setup = eth_kni_rx_queue_setup,
> + .tx_queue_setup = eth_kni_tx_queue_setup,
> + .rx_queue_release = eth_kni_queue_release,
> + .tx_queue_release = eth_kni_queue_release,
> + .link_update = eth_kni_link_update,
> + .stats_get = eth_kni_stats_get,
> + .stats_reset = eth_kni_stats_reset,
> +};
> +
> +static struct rte_vdev_driver eth_kni_drv;
> +
> +static struct rte_eth_dev *
> +eth_kni_create(const char *name, struct eth_kni_args *args,
> + unsigned int numa_node)
> +{
> + struct pmd_internals *internals = NULL;
> + struct rte_eth_dev_data *data;
> + struct rte_eth_dev *eth_dev;
> +
> + RTE_LOG(INFO, PMD, "Creating kni ethdev on numa socket %u\n",
> + numa_node);
> +
> + data = rte_zmalloc_socket(name, sizeof(*data), 0, numa_node);
> + if (data == NULL)
> + goto error;
> +
> + internals = rte_zmalloc_socket(name, sizeof(*internals), 0,
> numa_node);
> + if (internals == NULL)
> + goto error;
> +
> + /* reserve an ethdev entry */
> + eth_dev = rte_eth_dev_allocate(name);
> + if (eth_dev == NULL)
> + goto error;
> +
> + data->dev_private = internals;
> + data->port_id = eth_dev->data->port_id;
> + memmove(data->name, eth_dev->data->name, sizeof(data-
> >name));
> + data->nb_rx_queues = 1;
> + data->nb_tx_queues = 1;
> + data->dev_link = pmd_link;
> + data->mac_addrs = &internals->eth_addr;
> +
> + eth_random_addr(internals->eth_addr.addr_bytes);
> +
> + eth_dev->data = data;
> + eth_dev->dev_ops = ð_kni_ops;
> + eth_dev->driver = NULL;
> +
> + data->dev_flags = RTE_ETH_DEV_DETACHABLE;
> + data->kdrv = RTE_KDRV_NONE;
> + data->drv_name = eth_kni_drv.driver.name;
> + data->numa_node = numa_node;
> +
> + internals->no_request_thread = args->no_request_thread;
> +
> + return eth_dev;
> +
> +error:
> + rte_free(data);
> + rte_free(internals);
> +
> + return NULL;
> +}
> +
> +static int
> +kni_init(void)
> +{
> + if (is_kni_initialized == 0)
> + rte_kni_init(MAX_KNI_PORTS);
> +
> + is_kni_initialized++;
> +
> + return 0;
> +}
> +
> +static int
> +eth_kni_kvargs_process(struct eth_kni_args *args, const char *params)
> +{
> + struct rte_kvargs *kvlist;
> +
> + kvlist = rte_kvargs_parse(params, valid_arguments);
> + if (kvlist == NULL)
> + return -1;
> +
> + memset(args, 0, sizeof(struct eth_kni_args));
> +
> + if (rte_kvargs_count(kvlist, ETH_KNI_NO_REQUEST_THREAD_ARG)
> == 1)
> + args->no_request_thread = 1;
> +
> + rte_kvargs_free(kvlist);
> +
> + return 0;
> +}
> +
> +static int
> +eth_kni_probe(const char *name, const char *params)
> +{
> + struct rte_eth_dev *eth_dev;
> + struct eth_kni_args args;
> + int ret;
> +
> + RTE_LOG(INFO, PMD, "Initializing eth_kni for %s\n", name);
> +
> + ret = eth_kni_kvargs_process(&args, params);
> + if (ret < 0)
> + return ret;
> +
> + ret = kni_init();
> + if (ret < 0)
> + return ret;
> +
> + eth_dev = eth_kni_create(name, &args, rte_socket_id());
> + if (eth_dev == NULL)
> + goto kni_uninit;
> +
> + eth_dev->rx_pkt_burst = eth_kni_rx;
> + eth_dev->tx_pkt_burst = eth_kni_tx;
> +
> + return 0;
> +
> +kni_uninit:
> + is_kni_initialized--;
> + if (is_kni_initialized == 0)
> + rte_kni_close();
> + return -1;
> +}
> +
> +static int
> +eth_kni_remove(const char *name)
> +{
> + struct rte_eth_dev *eth_dev;
> + struct pmd_internals *internals;
> +
> + RTE_LOG(INFO, PMD, "Un-Initializing eth_kni for %s\n", name);
> +
> + /* find the ethdev entry */
> + eth_dev = rte_eth_dev_allocated(name);
> + if (eth_dev == NULL)
> + return -1;
> +
> + eth_kni_dev_stop(eth_dev);
> +
> + if (eth_dev->data) {
> + internals = eth_dev->data->dev_private;
> + rte_kni_release(internals->kni);
> +
> + rte_free(internals);
> + }
> + rte_free(eth_dev->data);
> +
> + rte_eth_dev_release_port(eth_dev);
> +
> + is_kni_initialized--;
> + if (is_kni_initialized == 0)
> + rte_kni_close();
> +
> + return 0;
> +}
> +
> +static struct rte_vdev_driver eth_kni_drv = {
> + .probe = eth_kni_probe,
> + .remove = eth_kni_remove,
> +};
> +
> +RTE_PMD_REGISTER_VDEV(net_kni, eth_kni_drv);
> +RTE_PMD_REGISTER_PARAM_STRING(net_kni,
> ETH_KNI_NO_REQUEST_THREAD_ARG "=<int>");
> diff --git a/drivers/net/kni/rte_pmd_kni_version.map
> b/drivers/net/kni/rte_pmd_kni_version.map
> new file mode 100644
> index 0000000..31eca32
> --- /dev/null
> +++ b/drivers/net/kni/rte_pmd_kni_version.map
> @@ -0,0 +1,4 @@
> +DPDK_17.02 {
> +
> + local: *;
> +};
> diff --git a/mk/rte.app.mk b/mk/rte.app.mk
> index a5daa84..2b3a53d 100644
> --- a/mk/rte.app.mk
> +++ b/mk/rte.app.mk
> @@ -59,11 +59,6 @@ _LDLIBS-y += -L$(RTE_SDK_BIN)/lib
> #
> # Order is important: from higher level to lower level
> #
> -
> -ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> -_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
> -endif
> -
> _LDLIBS-$(CONFIG_RTE_LIBRTE_PIPELINE) += -lrte_pipeline
> _LDLIBS-$(CONFIG_RTE_LIBRTE_TABLE) += -lrte_table
> _LDLIBS-$(CONFIG_RTE_LIBRTE_PORT) += -lrte_port
> @@ -84,6 +79,10 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_POWER) += -
> lrte_power
>
> _LDLIBS-y += --whole-archive
>
> +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
> +_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
> +endif
> +
> _LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER) += -lrte_timer
> _LDLIBS-$(CONFIG_RTE_LIBRTE_HASH) += -lrte_hash
> _LDLIBS-$(CONFIG_RTE_LIBRTE_EFD) += -lrte_efd
> @@ -116,6 +115,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -
> lrte_pmd_enic
> _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
> _LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
> _LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
> +_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += -lrte_pmd_kni
> _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -
> libverbs
> _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -
> libverbs
> _LDLIBS-$(CONFIG_RTE_LIBRTE_MPIPE_PMD) += -lrte_pmd_mpipe -lgxio
> --
> 2.9.3
On 1/30/2017 7:05 PM, Yong Wang wrote:
>> -----Original Message-----
>> From: Ferruh Yigit [mailto:ferruh.yigit@intel.com]
>> Sent: Monday, January 30, 2017 8:58 AM
>> To: Thomas Monjalon <thomas.monjalon@6wind.com>; Yong Wang
>> <yongwang@vmware.com>
>> Cc: dev@dpdk.org; Ferruh Yigit <ferruh.yigit@intel.com>
>> Subject: [PATCH v5] net/kni: add KNI PMD
>>
>> Add KNI PMD which wraps librte_kni for ease of use.
>>
>> KNI PMD can be used as any regular PMD to send / receive packets to the
>> Linux networking stack.
>>
>> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
>> ---
>
> Looks good except a few typos in the documentation added.
Thank you for the review, I will send a new version with them fixed.
>
> Reviewed-by: Yong Wang <yongwang@vmware.com>
>
>>
<...>
@@ -404,6 +404,11 @@ M: Keith Wiles <keith.wiles@intel.com>
F: drivers/net/tap/
F: doc/guides/nics/tap.rst
+KNI PMD
+M: Ferruh Yigit <ferruh.yigit@intel.com>
+F: drivers/net/kni/
+F: doc/guides/nics/kni.rst
+
Ring PMD
M: Bruce Richardson <bruce.richardson@intel.com>
F: drivers/net/ring/
@@ -576,6 +576,7 @@ CONFIG_RTE_PIPELINE_STATS_COLLECT=n
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
+CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_KMOD_ETHTOOL=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
@@ -39,6 +39,7 @@ CONFIG_RTE_EAL_IGB_UIO=y
CONFIG_RTE_EAL_VFIO=y
CONFIG_RTE_KNI_KMOD=y
CONFIG_RTE_LIBRTE_KNI=y
+CONFIG_RTE_LIBRTE_PMD_KNI=y
CONFIG_RTE_LIBRTE_VHOST=y
CONFIG_RTE_LIBRTE_PMD_VHOST=y
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
new file mode 100644
@@ -0,0 +1,7 @@
+;
+; Supported features of the 'kni' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Usage doc = Y
@@ -46,6 +46,7 @@ Network Interface Controller Drivers
i40e
ixgbe
intel_vf
+ kni
mlx4
mlx5
nfp
new file mode 100644
@@ -0,0 +1,197 @@
+.. BSD LICENSE
+ Copyright(c) 2017 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+KNI Poll Mode Driver
+======================
+
+KNI PMD is wrapper to the :ref:`librte_kni <kni>` library.
+
+This PMD enables using KNI without having a KNI specific application,
+any forwarding application can use PMD interface for KNI.
+
+Sending packets to the any DPDK controlled interface or sending to the
+Linux networking stack will be transparent to the DPDK application.
+
+To create a KNI device ``net_kni#`` device name should be used, and this
+will create ``kni#`` Linux virtual network interface.
+
+There is no physical device backend for the virtual KNI device.
+
+Packets sent to the KNI Linux interface will be received by the DPDK
+application, and DPDK application may forward packets to a physical NIC
+or to a virtual device (like another KNI interface or PCAP interface).
+
+To forward any traffic from physical NIC to the Linux networking stack,
+an application should control a physical port and create one virtual KNI port,
+and forward between two.
+
+Using this PMD requires KNI kernel module be inserted.
+
+
+Usage
+-----
+
+EAL ``--vdev`` argument can be used to create KNI device instance, like::
+
+ testpmd --vdev=net_kni0 --vdev=net_kn1 -- -i
+
+Above command will create ``kni0`` and ``kni1`` Linux network interfaces,
+those interfaces can be controlled by standard Linux tools.
+
+When testpmd forwarding started, any packets send to ``kni0`` interface
+forwarded to the ``kni1`` interface and vice versa.
+
+There is no hard limit on number of interfaces can be created.
+
+
+Default interface configuration
+-------------------------------
+
+``librte_kni`` can create Linux network interfaces with different features,
+feature set controlled by a configuration struct, and KNI PMD uses a fixed
+configuration:
+
+ .. code-block:: console
+
+ Interface name: kni#
+ force bind kernel thread to a core : NO
+ mbuf size: MAX_PACKET_SZ
+
+KNI control path is not supported with the PMD, since there is no physical
+backend device by default.
+
+
+PMD arguments
+-------------
+
+``no_request_thread``, by default PMD creates a phtread for each KNI interface
+to handle Linux network interface control commands, like ``ifconfig kni0 up``
+
+With ``no_request_thread`` option, pthread is not created and control commands
+not handled by PMD.
+
+By default request thread is enabled. And this argument should not be used
+most of the time, unless this PMD used with customized DPDK application to handle
+requests itself.
+
+Argument usage::
+
+ testpmd --vdev "net_kni0,no_request_thread=1" -- -i
+
+
+PMD log messages
+----------------
+
+If KNI kernel module (rte_kni.ko) not inserted, following error log printed::
+
+ "KNI: KNI subsystem has not been initialized. Invoke rte_kni_init() first"
+
+
+PMD testing
+-----------
+
+It is possible to test PMD quicly using KNI kernel module loopback feature:
+
+* Insert KNI kernel module with loopback support:
+
+ .. code-block:: console
+
+ insmod build/kmod/rte_kni.ko lo_mode=lo_mode_fifo_skb
+
+* Start testpmd with no physical device but two KNI virtual devices:
+
+ .. code-block:: console
+
+ ./testpmd --vdev net_kni0 --vdev net_kni1 -- -i
+
+ .. code-block:: console
+
+ ...
+ Configuring Port 0 (socket 0)
+ KNI: pci: 00:00:00 c580:b8
+ Port 0: 1A:4A:5B:7C:A2:8C
+ Configuring Port 1 (socket 0)
+ KNI: pci: 00:00:00 600:b9
+ Port 1: AE:95:21:07:93:DD
+ Checking link statuses...
+ Port 0 Link Up - speed 10000 Mbps - full-duplex
+ Port 1 Link Up - speed 10000 Mbps - full-duplex
+ Done
+ testpmd>
+
+* Observe Linux interfaces
+
+ .. code-block:: console
+
+ $ ifconfig kni0 && ifconfig kni1
+ kni0: flags=4098<BROADCAST,MULTICAST> mtu 1500
+ ether ae:8e:79:8e:9b:c8 txqueuelen 1000 (Ethernet)
+ RX packets 0 bytes 0 (0.0 B)
+ RX errors 0 dropped 0 overruns 0 frame 0
+ TX packets 0 bytes 0 (0.0 B)
+ TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
+
+ kni1: flags=4098<BROADCAST,MULTICAST> mtu 1500
+ ether 9e:76:43:53:3e:9b txqueuelen 1000 (Ethernet)
+ RX packets 0 bytes 0 (0.0 B)
+ RX errors 0 dropped 0 overruns 0 frame 0
+ TX packets 0 bytes 0 (0.0 B)
+ TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
+
+
+* Start forwarding with tx_first:
+
+ .. code-block:: console
+
+ testpmd> start tx_first
+
+* Quit and check forwarding stats:
+
+ .. code-block:: console
+
+ testpmd> quit
+ Telling cores to stop...
+ Waiting for lcores to finish...
+
+ ---------------------- Forward statistics for port 0 ----------------------
+ RX-packets: 35637905 RX-dropped: 0 RX-total: 35637905
+ TX-packets: 35637947 TX-dropped: 0 TX-total: 35637947
+ ----------------------------------------------------------------------------
+
+ ---------------------- Forward statistics for port 1 ----------------------
+ RX-packets: 35637915 RX-dropped: 0 RX-total: 35637915
+ TX-packets: 35637937 TX-dropped: 0 TX-total: 35637937
+ ----------------------------------------------------------------------------
+
+ +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
+ RX-packets: 71275820 RX-dropped: 0 RX-total: 71275820
+ TX-packets: 71275884 TX-dropped: 0 TX-total: 71275884
+ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
@@ -41,6 +41,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += kni
DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4
DIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5
DIRS-$(CONFIG_RTE_LIBRTE_MPIPE_PMD) += mpipe
new file mode 100644
@@ -0,0 +1,64 @@
+# BSD LICENSE
+#
+# Copyright(c) 2017 Intel Corporation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_kni.a
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+LDLIBS += -lpthread
+
+EXPORT_MAP := rte_pmd_kni_version.map
+
+LIBABIVER := 1
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += rte_eth_kni.c
+
+#
+# Export include files
+#
+SYMLINK-y-include +=
+
+# this lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_kni
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_mempool
+
+include $(RTE_SDK)/mk/rte.lib.mk
new file mode 100644
@@ -0,0 +1,515 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <fcntl.h>
+#include <pthread.h>
+#include <unistd.h>
+
+#include <rte_ethdev.h>
+#include <rte_kni.h>
+#include <rte_kvargs.h>
+#include <rte_malloc.h>
+#include <rte_vdev.h>
+
+/* Only single queue supported */
+#define KNI_MAX_QUEUE_PER_PORT 1
+
+#define MAX_PACKET_SZ 2048
+#define MAX_KNI_PORTS 8
+
+#define ETH_KNI_NO_REQUEST_THREAD_ARG "no_request_thread"
+static const char * const valid_arguments[] = {
+ ETH_KNI_NO_REQUEST_THREAD_ARG,
+ NULL
+};
+
+struct eth_kni_args {
+ int no_request_thread;
+};
+
+struct pmd_queue_stats {
+ uint64_t pkts;
+ uint64_t bytes;
+ uint64_t err_pkts;
+};
+
+struct pmd_queue {
+ struct pmd_internals *internals;
+ struct rte_mempool *mb_pool;
+
+ struct pmd_queue_stats rx;
+ struct pmd_queue_stats tx;
+};
+
+struct pmd_internals {
+ struct rte_kni *kni;
+ int is_kni_started;
+
+ pthread_t thread;
+ int stop_thread;
+ int no_request_thread;
+
+ struct ether_addr eth_addr;
+
+ struct pmd_queue rx_queues[KNI_MAX_QUEUE_PER_PORT];
+ struct pmd_queue tx_queues[KNI_MAX_QUEUE_PER_PORT];
+};
+
+static const struct rte_eth_link pmd_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_DOWN,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG,
+};
+static int is_kni_initialized;
+
+static uint16_t
+eth_kni_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
+{
+ struct pmd_queue *kni_q = q;
+ struct rte_kni *kni = kni_q->internals->kni;
+ uint16_t nb_pkts;
+
+ nb_pkts = rte_kni_rx_burst(kni, bufs, nb_bufs);
+
+ kni_q->rx.pkts += nb_pkts;
+ kni_q->rx.err_pkts += nb_bufs - nb_pkts;
+
+ return nb_pkts;
+}
+
+static uint16_t
+eth_kni_tx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
+{
+ struct pmd_queue *kni_q = q;
+ struct rte_kni *kni = kni_q->internals->kni;
+ uint16_t nb_pkts;
+
+ nb_pkts = rte_kni_tx_burst(kni, bufs, nb_bufs);
+
+ kni_q->tx.pkts += nb_pkts;
+ kni_q->tx.err_pkts += nb_bufs - nb_pkts;
+
+ return nb_pkts;
+}
+
+static void *
+kni_handle_request(void *param)
+{
+ struct pmd_internals *internals = param;
+#define MS 1000
+
+ while (!internals->stop_thread) {
+ rte_kni_handle_request(internals->kni);
+ usleep(500 * MS);
+ }
+
+ return param;
+}
+
+static int
+eth_kni_start(struct rte_eth_dev *dev)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+ uint16_t port_id = dev->data->port_id;
+ struct rte_mempool *mb_pool;
+ struct rte_kni_conf conf;
+ const char *name = dev->data->name + 4; /* remove net_ */
+
+ snprintf(conf.name, RTE_KNI_NAMESIZE, "%s", name);
+ conf.force_bind = 0;
+ conf.group_id = port_id;
+ conf.mbuf_size = MAX_PACKET_SZ;
+ mb_pool = internals->rx_queues[0].mb_pool;
+
+ internals->kni = rte_kni_alloc(mb_pool, &conf, NULL);
+ if (internals->kni == NULL) {
+ RTE_LOG(ERR, PMD,
+ "Fail to create kni interface for port: %d\n",
+ port_id);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+eth_kni_dev_start(struct rte_eth_dev *dev)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+ int ret;
+
+ if (internals->is_kni_started == 0) {
+ ret = eth_kni_start(dev);
+ if (ret)
+ return -1;
+ internals->is_kni_started = 1;
+ }
+
+ if (internals->no_request_thread == 0) {
+ ret = pthread_create(&internals->thread, NULL,
+ kni_handle_request, internals);
+ if (ret) {
+ RTE_LOG(ERR, PMD,
+ "Fail to create kni request thread\n");
+ return -1;
+ }
+ }
+
+ dev->data->dev_link.link_status = 1;
+
+ return 0;
+}
+
+static void
+eth_kni_dev_stop(struct rte_eth_dev *dev)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+ int ret;
+
+ if (internals->no_request_thread == 0) {
+ internals->stop_thread = 1;
+
+ ret = pthread_cancel(internals->thread);
+ if (ret)
+ RTE_LOG(ERR, PMD, "Can't cancel the thread\n");
+
+ ret = pthread_join(internals->thread, NULL);
+ if (ret)
+ RTE_LOG(ERR, PMD, "Can't join the thread\n");
+
+ internals->stop_thread = 0;
+ }
+
+ dev->data->dev_link.link_status = 0;
+}
+
+static int
+eth_kni_dev_configure(struct rte_eth_dev *dev __rte_unused)
+{
+ return 0;
+}
+
+static void
+eth_kni_dev_info(struct rte_eth_dev *dev __rte_unused,
+ struct rte_eth_dev_info *dev_info)
+{
+ dev_info->max_mac_addrs = 1;
+ dev_info->max_rx_pktlen = UINT32_MAX;
+ dev_info->max_rx_queues = KNI_MAX_QUEUE_PER_PORT;
+ dev_info->max_tx_queues = KNI_MAX_QUEUE_PER_PORT;
+ dev_info->min_rx_bufsize = 0;
+ dev_info->pci_dev = NULL;
+}
+
+static int
+eth_kni_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc __rte_unused,
+ unsigned int socket_id __rte_unused,
+ const struct rte_eth_rxconf *rx_conf __rte_unused,
+ struct rte_mempool *mb_pool)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+ struct pmd_queue *q;
+
+ q = &internals->rx_queues[rx_queue_id];
+ q->internals = internals;
+ q->mb_pool = mb_pool;
+
+ dev->data->rx_queues[rx_queue_id] = q;
+
+ return 0;
+}
+
+static int
+eth_kni_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc __rte_unused,
+ unsigned int socket_id __rte_unused,
+ const struct rte_eth_txconf *tx_conf __rte_unused)
+{
+ struct pmd_internals *internals = dev->data->dev_private;
+ struct pmd_queue *q;
+
+ q = &internals->tx_queues[tx_queue_id];
+ q->internals = internals;
+
+ dev->data->tx_queues[tx_queue_id] = q;
+
+ return 0;
+}
+
+static void
+eth_kni_queue_release(void *q __rte_unused)
+{
+}
+
+static int
+eth_kni_link_update(struct rte_eth_dev *dev __rte_unused,
+ int wait_to_complete __rte_unused)
+{
+ return 0;
+}
+
+static void
+eth_kni_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
+{
+ unsigned long rx_packets_total = 0, rx_bytes_total = 0;
+ unsigned long tx_packets_total = 0, tx_bytes_total = 0;
+ struct rte_eth_dev_data *data = dev->data;
+ unsigned long tx_packets_err_total = 0;
+ unsigned int i, num_stats;
+ struct pmd_queue *q;
+
+ num_stats = RTE_MIN((unsigned int)RTE_ETHDEV_QUEUE_STAT_CNTRS,
+ data->nb_rx_queues);
+ for (i = 0; i < num_stats; i++) {
+ q = data->rx_queues[i];
+ stats->q_ipackets[i] = q->rx.pkts;
+ stats->q_ibytes[i] = q->rx.bytes;
+ rx_packets_total += stats->q_ipackets[i];
+ rx_bytes_total += stats->q_ibytes[i];
+ }
+
+ num_stats = RTE_MIN((unsigned int)RTE_ETHDEV_QUEUE_STAT_CNTRS,
+ data->nb_tx_queues);
+ for (i = 0; i < num_stats; i++) {
+ q = data->tx_queues[i];
+ stats->q_opackets[i] = q->tx.pkts;
+ stats->q_obytes[i] = q->tx.bytes;
+ stats->q_errors[i] = q->tx.err_pkts;
+ tx_packets_total += stats->q_opackets[i];
+ tx_bytes_total += stats->q_obytes[i];
+ tx_packets_err_total += stats->q_errors[i];
+ }
+
+ stats->ipackets = rx_packets_total;
+ stats->ibytes = rx_bytes_total;
+ stats->opackets = tx_packets_total;
+ stats->obytes = tx_bytes_total;
+ stats->oerrors = tx_packets_err_total;
+}
+
+static void
+eth_kni_stats_reset(struct rte_eth_dev *dev)
+{
+ struct rte_eth_dev_data *data = dev->data;
+ struct pmd_queue *q;
+ unsigned int i;
+
+ for (i = 0; i < data->nb_rx_queues; i++) {
+ q = data->rx_queues[i];
+ q->rx.pkts = 0;
+ q->rx.bytes = 0;
+ }
+ for (i = 0; i < data->nb_tx_queues; i++) {
+ q = data->tx_queues[i];
+ q->tx.pkts = 0;
+ q->tx.bytes = 0;
+ q->tx.err_pkts = 0;
+ }
+}
+
+static const struct eth_dev_ops eth_kni_ops = {
+ .dev_start = eth_kni_dev_start,
+ .dev_stop = eth_kni_dev_stop,
+ .dev_configure = eth_kni_dev_configure,
+ .dev_infos_get = eth_kni_dev_info,
+ .rx_queue_setup = eth_kni_rx_queue_setup,
+ .tx_queue_setup = eth_kni_tx_queue_setup,
+ .rx_queue_release = eth_kni_queue_release,
+ .tx_queue_release = eth_kni_queue_release,
+ .link_update = eth_kni_link_update,
+ .stats_get = eth_kni_stats_get,
+ .stats_reset = eth_kni_stats_reset,
+};
+
+static struct rte_vdev_driver eth_kni_drv;
+
+static struct rte_eth_dev *
+eth_kni_create(const char *name, struct eth_kni_args *args,
+ unsigned int numa_node)
+{
+ struct pmd_internals *internals = NULL;
+ struct rte_eth_dev_data *data;
+ struct rte_eth_dev *eth_dev;
+
+ RTE_LOG(INFO, PMD, "Creating kni ethdev on numa socket %u\n",
+ numa_node);
+
+ data = rte_zmalloc_socket(name, sizeof(*data), 0, numa_node);
+ if (data == NULL)
+ goto error;
+
+ internals = rte_zmalloc_socket(name, sizeof(*internals), 0, numa_node);
+ if (internals == NULL)
+ goto error;
+
+ /* reserve an ethdev entry */
+ eth_dev = rte_eth_dev_allocate(name);
+ if (eth_dev == NULL)
+ goto error;
+
+ data->dev_private = internals;
+ data->port_id = eth_dev->data->port_id;
+ memmove(data->name, eth_dev->data->name, sizeof(data->name));
+ data->nb_rx_queues = 1;
+ data->nb_tx_queues = 1;
+ data->dev_link = pmd_link;
+ data->mac_addrs = &internals->eth_addr;
+
+ eth_random_addr(internals->eth_addr.addr_bytes);
+
+ eth_dev->data = data;
+ eth_dev->dev_ops = ð_kni_ops;
+ eth_dev->driver = NULL;
+
+ data->dev_flags = RTE_ETH_DEV_DETACHABLE;
+ data->kdrv = RTE_KDRV_NONE;
+ data->drv_name = eth_kni_drv.driver.name;
+ data->numa_node = numa_node;
+
+ internals->no_request_thread = args->no_request_thread;
+
+ return eth_dev;
+
+error:
+ rte_free(data);
+ rte_free(internals);
+
+ return NULL;
+}
+
+static int
+kni_init(void)
+{
+ if (is_kni_initialized == 0)
+ rte_kni_init(MAX_KNI_PORTS);
+
+ is_kni_initialized++;
+
+ return 0;
+}
+
+static int
+eth_kni_kvargs_process(struct eth_kni_args *args, const char *params)
+{
+ struct rte_kvargs *kvlist;
+
+ kvlist = rte_kvargs_parse(params, valid_arguments);
+ if (kvlist == NULL)
+ return -1;
+
+ memset(args, 0, sizeof(struct eth_kni_args));
+
+ if (rte_kvargs_count(kvlist, ETH_KNI_NO_REQUEST_THREAD_ARG) == 1)
+ args->no_request_thread = 1;
+
+ rte_kvargs_free(kvlist);
+
+ return 0;
+}
+
+static int
+eth_kni_probe(const char *name, const char *params)
+{
+ struct rte_eth_dev *eth_dev;
+ struct eth_kni_args args;
+ int ret;
+
+ RTE_LOG(INFO, PMD, "Initializing eth_kni for %s\n", name);
+
+ ret = eth_kni_kvargs_process(&args, params);
+ if (ret < 0)
+ return ret;
+
+ ret = kni_init();
+ if (ret < 0)
+ return ret;
+
+ eth_dev = eth_kni_create(name, &args, rte_socket_id());
+ if (eth_dev == NULL)
+ goto kni_uninit;
+
+ eth_dev->rx_pkt_burst = eth_kni_rx;
+ eth_dev->tx_pkt_burst = eth_kni_tx;
+
+ return 0;
+
+kni_uninit:
+ is_kni_initialized--;
+ if (is_kni_initialized == 0)
+ rte_kni_close();
+ return -1;
+}
+
+static int
+eth_kni_remove(const char *name)
+{
+ struct rte_eth_dev *eth_dev;
+ struct pmd_internals *internals;
+
+ RTE_LOG(INFO, PMD, "Un-Initializing eth_kni for %s\n", name);
+
+ /* find the ethdev entry */
+ eth_dev = rte_eth_dev_allocated(name);
+ if (eth_dev == NULL)
+ return -1;
+
+ eth_kni_dev_stop(eth_dev);
+
+ if (eth_dev->data) {
+ internals = eth_dev->data->dev_private;
+ rte_kni_release(internals->kni);
+
+ rte_free(internals);
+ }
+ rte_free(eth_dev->data);
+
+ rte_eth_dev_release_port(eth_dev);
+
+ is_kni_initialized--;
+ if (is_kni_initialized == 0)
+ rte_kni_close();
+
+ return 0;
+}
+
+static struct rte_vdev_driver eth_kni_drv = {
+ .probe = eth_kni_probe,
+ .remove = eth_kni_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_kni, eth_kni_drv);
+RTE_PMD_REGISTER_PARAM_STRING(net_kni, ETH_KNI_NO_REQUEST_THREAD_ARG "=<int>");
new file mode 100644
@@ -0,0 +1,4 @@
+DPDK_17.02 {
+
+ local: *;
+};
@@ -59,11 +59,6 @@ _LDLIBS-y += -L$(RTE_SDK_BIN)/lib
#
# Order is important: from higher level to lower level
#
-
-ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
-_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
-endif
-
_LDLIBS-$(CONFIG_RTE_LIBRTE_PIPELINE) += -lrte_pipeline
_LDLIBS-$(CONFIG_RTE_LIBRTE_TABLE) += -lrte_table
_LDLIBS-$(CONFIG_RTE_LIBRTE_PORT) += -lrte_port
@@ -84,6 +79,10 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_POWER) += -lrte_power
_LDLIBS-y += --whole-archive
+ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
+endif
+
_LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER) += -lrte_timer
_LDLIBS-$(CONFIG_RTE_LIBRTE_HASH) += -lrte_hash
_LDLIBS-$(CONFIG_RTE_LIBRTE_EFD) += -lrte_efd
@@ -116,6 +115,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += -lrte_pmd_kni
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -libverbs
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -libverbs
_LDLIBS-$(CONFIG_RTE_LIBRTE_MPIPE_PMD) += -lrte_pmd_mpipe -lgxio