[dpdk-dev] common: introduce an integer log2 function
Checks
Commit Message
At some places, the log2() function is used despite this function
works on float. This introduces a dependency to the math lib but
most of the time it is not required because we want an integer log2.
Add a new helper to do this job and fix 2 drivers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
drivers/net/nfp/nfp_net.c | 6 ++----
lib/librte_eal/common/include/rte_common.h | 17 +++++++++++++++++
mk/rte.app.mk | 2 +-
3 files changed, 20 insertions(+), 5 deletions(-)
Comments
I forgot to CC Alejandro for nfp.
Also CC Jerin: I think the same could be done in thunderx, but
I did not want to do the patch since it changes the base/ driver.
On Thu, 6 Apr 2017 16:15:36 +0200, Olivier Matz <olivier.matz@6wind.com> wrote:
> At some places, the log2() function is used despite this function
> works on float. This introduces a dependency to the math lib but
> most of the time it is not required because we want an integer log2.
>
> Add a new helper to do this job and fix 2 drivers.
>
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> ---
> drivers/net/nfp/nfp_net.c | 6 ++----
> lib/librte_eal/common/include/rte_common.h | 17 +++++++++++++++++
> mk/rte.app.mk | 2 +-
> 3 files changed, 20 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
> index a1ad97ad5..0e6a729ef 100644
> --- a/drivers/net/nfp/nfp_net.c
> +++ b/drivers/net/nfp/nfp_net.c
> @@ -39,8 +39,6 @@
> * Netronome vNIC DPDK Poll-Mode Driver: Main entry point
> */
>
> -#include <math.h>
> -
> #include <rte_byteorder.h>
> #include <rte_common.h>
> #include <rte_log.h>
> @@ -1493,7 +1491,7 @@ nfp_net_rx_queue_setup(struct rte_eth_dev *dev,
> * of descriptors in log2 format
> */
> nn_cfg_writeq(hw, NFP_NET_CFG_RXR_ADDR(queue_idx), rxq->dma);
> - nn_cfg_writeb(hw, NFP_NET_CFG_RXR_SZ(queue_idx), log2(nb_desc));
> + nn_cfg_writeb(hw, NFP_NET_CFG_RXR_SZ(queue_idx), rte_log2_u32(nb_desc));
>
> return 0;
> }
> @@ -1647,7 +1645,7 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
> * of descriptors in log2 format
> */
> nn_cfg_writeq(hw, NFP_NET_CFG_TXR_ADDR(queue_idx), txq->dma);
> - nn_cfg_writeb(hw, NFP_NET_CFG_TXR_SZ(queue_idx), log2(nb_desc));
> + nn_cfg_writeb(hw, NFP_NET_CFG_TXR_SZ(queue_idx), rte_log2_u32(nb_desc));
>
> return 0;
> }
> diff --git a/lib/librte_eal/common/include/rte_common.h b/lib/librte_eal/common/include/rte_common.h
> index e057f6e21..eea0054c1 100644
> --- a/lib/librte_eal/common/include/rte_common.h
> +++ b/lib/librte_eal/common/include/rte_common.h
> @@ -326,6 +326,23 @@ rte_bsf32(uint32_t v)
> return __builtin_ctz(v);
> }
>
> +/**
> + * Return the rounded-up log2 of a integer.
> + *
> + * @param v
> + * The input parameter.
> + * @return
> + * The rounded-up log2 of the input, or 0 if the input is 0.
> + */
> +static inline uint32_t
> +rte_log2_u32(uint32_t v)
> +{
> + if (v == 0)
> + return 0;
> + v = rte_align32pow2(v);
> + return rte_bsf32(v);
> +}
> +
> #ifndef offsetof
> /** Return the offset of a field in a structure. */
> #define offsetof(TYPE, MEMBER) __builtin_offsetof (TYPE, MEMBER)
> diff --git a/mk/rte.app.mk b/mk/rte.app.mk
> index 4c659e971..2fcd388e6 100644
> --- a/mk/rte.app.mk
> +++ b/mk/rte.app.mk
> @@ -125,7 +125,7 @@ endif
> _LDLIBS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += -lrte_pmd_lio
> _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -libverbs
> _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -libverbs
> -_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp -lm
> +_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp
> _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null
> _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap -lpcap
> _LDLIBS-$(CONFIG_RTE_LIBRTE_QEDE_PMD) += -lrte_pmd_qede
-----Original Message-----
> Date: Thu, 6 Apr 2017 16:23:55 +0200
> From: Olivier MATZ <olivier.matz@6wind.com>
> To: dev@dpdk.org, Jerin Jacob <jerin.jacob@caviumnetworks.com>
> Cc: alejandro.lucero@netronome.com
> Subject: Re: [dpdk-dev] [PATCH] common: introduce an integer log2 function
> X-Mailer: Claws Mail 3.14.1 (GTK+ 2.24.31; x86_64-pc-linux-gnu)
>
> I forgot to CC Alejandro for nfp.
>
> Also CC Jerin: I think the same could be done in thunderx, but
> I did not want to do the patch since it changes the base/ driver.
>
>
> On Thu, 6 Apr 2017 16:15:36 +0200, Olivier Matz <olivier.matz@6wind.com> wrote:
> > At some places, the log2() function is used despite this function
> > works on float. This introduces a dependency to the math lib but
> > most of the time it is not required because we want an integer log2.
> >
> > Add a new helper to do this job and fix 2 drivers.
> >
> > Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> > ---
> > drivers/net/nfp/nfp_net.c | 6 ++----
> > lib/librte_eal/common/include/rte_common.h | 17 +++++++++++++++++
> > mk/rte.app.mk | 2 +-
> > 3 files changed, 20 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
> > index a1ad97ad5..0e6a729ef 100644
> > --- a/drivers/net/nfp/nfp_net.c
> > +++ b/drivers/net/nfp/nfp_net.c
> > @@ -39,8 +39,6 @@
> > * Netronome vNIC DPDK Poll-Mode Driver: Main entry point
> > */
> >
> > -#include <math.h>
> > -
> > #include <rte_byteorder.h>
> > #include <rte_common.h>
> > #include <rte_log.h>
> > @@ -1493,7 +1491,7 @@ nfp_net_rx_queue_setup(struct rte_eth_dev *dev,
> > * of descriptors in log2 format
> > */
> > nn_cfg_writeq(hw, NFP_NET_CFG_RXR_ADDR(queue_idx), rxq->dma);
> > - nn_cfg_writeb(hw, NFP_NET_CFG_RXR_SZ(queue_idx), log2(nb_desc));
> > + nn_cfg_writeb(hw, NFP_NET_CFG_RXR_SZ(queue_idx), rte_log2_u32(nb_desc));
> >
> > return 0;
> > }
> > @@ -1647,7 +1645,7 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
> > * of descriptors in log2 format
> > */
> > nn_cfg_writeq(hw, NFP_NET_CFG_TXR_ADDR(queue_idx), txq->dma);
> > - nn_cfg_writeb(hw, NFP_NET_CFG_TXR_SZ(queue_idx), log2(nb_desc));
> > + nn_cfg_writeb(hw, NFP_NET_CFG_TXR_SZ(queue_idx), rte_log2_u32(nb_desc));
> >
> > return 0;
> > }
> > diff --git a/lib/librte_eal/common/include/rte_common.h b/lib/librte_eal/common/include/rte_common.h
> > index e057f6e21..eea0054c1 100644
> > --- a/lib/librte_eal/common/include/rte_common.h
> > +++ b/lib/librte_eal/common/include/rte_common.h
> > @@ -326,6 +326,23 @@ rte_bsf32(uint32_t v)
> > return __builtin_ctz(v);
> > }
> >
> > +/**
> > + * Return the rounded-up log2 of a integer.
> > + *
> > + * @param v
> > + * The input parameter.
> > + * @return
> > + * The rounded-up log2 of the input, or 0 if the input is 0.
> > + */
> > +static inline uint32_t
> > +rte_log2_u32(uint32_t v)
> > +{
> > + if (v == 0)
> > + return 0;
> > + v = rte_align32pow2(v);
> > + return rte_bsf32(v);
> > +}
I think, It will good be if we add unit test case for the same.
> > +
> > #ifndef offsetof
> > /** Return the offset of a field in a structure. */
> > #define offsetof(TYPE, MEMBER) __builtin_offsetof (TYPE, MEMBER)
> > diff --git a/mk/rte.app.mk b/mk/rte.app.mk
> > index 4c659e971..2fcd388e6 100644
> > --- a/mk/rte.app.mk
> > +++ b/mk/rte.app.mk
> > @@ -125,7 +125,7 @@ endif
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += -lrte_pmd_lio
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -libverbs
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -libverbs
> > -_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp -lm
> > +_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap -lpcap
> > _LDLIBS-$(CONFIG_RTE_LIBRTE_QEDE_PMD) += -lrte_pmd_qede
>
Alejandro,
Are you OK to replace log2 by rte_log2_u32?
I'm waiting your ack to apply this patch.
06/04/2017 16:23, Olivier MATZ:
> I forgot to CC Alejandro for nfp.
[...]
> > drivers/net/nfp/nfp_net.c | 6 ++----
> > lib/librte_eal/common/include/rte_common.h | 17 +++++++++++++++++
> > mk/rte.app.mk | 2 +-
> > 3 files changed, 20 insertions(+), 5 deletions(-)
Hi,
Sorry for the late answer.
Yes, that's fine.
Thank you
On Sat, Jul 1, 2017 at 3:37 PM, Thomas Monjalon <thomas@monjalon.net> wrote:
> Alejandro,
>
> Are you OK to replace log2 by rte_log2_u32?
> I'm waiting your ack to apply this patch.
>
>
> 06/04/2017 16:23, Olivier MATZ:
> > I forgot to CC Alejandro for nfp.
> [...]
> > > drivers/net/nfp/nfp_net.c | 6 ++----
> > > lib/librte_eal/common/include/rte_common.h | 17 +++++++++++++++++
> > > mk/rte.app.mk | 2 +-
> > > 3 files changed, 20 insertions(+), 5 deletions(-)
>
>
06/04/2017 16:15, Olivier Matz:
> At some places, the log2() function is used despite this function
> works on float. This introduces a dependency to the math lib but
> most of the time it is not required because we want an integer log2.
>
> Add a new helper to do this job and fix 2 drivers.
Only nfp driver is fixed.
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Applied, thanks
@@ -39,8 +39,6 @@
* Netronome vNIC DPDK Poll-Mode Driver: Main entry point
*/
-#include <math.h>
-
#include <rte_byteorder.h>
#include <rte_common.h>
#include <rte_log.h>
@@ -1493,7 +1491,7 @@ nfp_net_rx_queue_setup(struct rte_eth_dev *dev,
* of descriptors in log2 format
*/
nn_cfg_writeq(hw, NFP_NET_CFG_RXR_ADDR(queue_idx), rxq->dma);
- nn_cfg_writeb(hw, NFP_NET_CFG_RXR_SZ(queue_idx), log2(nb_desc));
+ nn_cfg_writeb(hw, NFP_NET_CFG_RXR_SZ(queue_idx), rte_log2_u32(nb_desc));
return 0;
}
@@ -1647,7 +1645,7 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
* of descriptors in log2 format
*/
nn_cfg_writeq(hw, NFP_NET_CFG_TXR_ADDR(queue_idx), txq->dma);
- nn_cfg_writeb(hw, NFP_NET_CFG_TXR_SZ(queue_idx), log2(nb_desc));
+ nn_cfg_writeb(hw, NFP_NET_CFG_TXR_SZ(queue_idx), rte_log2_u32(nb_desc));
return 0;
}
@@ -326,6 +326,23 @@ rte_bsf32(uint32_t v)
return __builtin_ctz(v);
}
+/**
+ * Return the rounded-up log2 of a integer.
+ *
+ * @param v
+ * The input parameter.
+ * @return
+ * The rounded-up log2 of the input, or 0 if the input is 0.
+ */
+static inline uint32_t
+rte_log2_u32(uint32_t v)
+{
+ if (v == 0)
+ return 0;
+ v = rte_align32pow2(v);
+ return rte_bsf32(v);
+}
+
#ifndef offsetof
/** Return the offset of a field in a structure. */
#define offsetof(TYPE, MEMBER) __builtin_offsetof (TYPE, MEMBER)
@@ -125,7 +125,7 @@ endif
_LDLIBS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += -lrte_pmd_lio
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -libverbs
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -libverbs
-_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp -lm
+_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap -lpcap
_LDLIBS-$(CONFIG_RTE_LIBRTE_QEDE_PMD) += -lrte_pmd_qede