@@ -333,6 +333,11 @@ F: drivers/net/enic/
F: doc/guides/nics/enic.rst
F: doc/guides/nics/features/enic.ini
+Fail-safe PMD
+M: Gaetan Rivet <gaetan.rivet@6wind.com>
+F: drivers/net/failsafe/
+F: doc/guides/nics/fail_safe.rst
+
Intel e1000
M: Wenzhuo Lu <wenzhuo.lu@intel.com>
F: drivers/net/e1000/
@@ -425,6 +425,12 @@ CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
+# Compile fail-safe PMD
+#
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG=n
+
+#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
new file mode 100644
@@ -0,0 +1,133 @@
+.. BSD LICENSE
+ Copyright 2017 6WIND S.A.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Fail-safe poll mode driver library
+==================================
+
+The Fail-safe poll mode driver library (**librte_pmd_failsafe**) is a virtual
+device that allows using any device supporting hotplug (sudden device removal
+and plugging on its bus), without modifying other components relying on such
+device (application, other PMDs).
+
+Additionally to the Seamless Hotplug feature, the Fail-safe PMD offers the
+ability to redirect operations to secondary devices when the primary has been
+removed from the system.
+
+.. note::
+
+ The library is enabled by default. You can enable it or disable it manually
+ by setting the ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` configuration option.
+
+Features
+--------
+
+The Fail-safe PMD only supports a limited set of features. If you plan to use a
+device underneath the Fail-safe PMD with a specific feature, this feature must
+be supported by the Fail-safe PMD to avoid throwing any error.
+
+Check the feature matrix for the complete set of supported features.
+
+Compilation options
+-------------------
+
+These options can be modified in the ``$RTE_TARGET/build/.config`` file.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE`` (default **y**)
+
+ Toggle compiling librte_pmd_failsafe itself.
+
+- ``CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG`` (default **n**)
+
+ Toggle debugging code.
+
+Using the Fail-safe PMD from the EAL command line
+-------------------------------------------------
+
+The Fail-safe PMD can be used like most other DPDK virtual devices, by passing a
+``--vdev`` parameter to the EAL when starting the application. The device name
+must start with the *net_failsafe* prefix, followed by numbers or letters. This
+name must be unique for each device. Each fail-safe instance must have at least one
+sub-device, up to ``RTE_MAX_ETHPORTS-1``.
+
+A sub-device can be any legal DPDK device, including possibly another fail-safe
+instance.
+
+Fail-safe command line parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- **dev(<iface>)** parameter
+
+ This parameter allows the user to define a sub-device. The ``<iface>`` part of
+ this parameter must be a valid device definition. It could be the argument
+ provided to a ``-w`` PCI device specification or the argument that would be
+ given to a ``--vdev`` parameter (including a fail-safe).
+ Enclosing the device definition within parenthesis here allows using
+ additional sub-device parameters if need be. They will be passed on to the
+ sub-device.
+
+- **mac** parameter [MAC address]
+
+ This parameter allows the user to set a default MAC address to the fail-safe
+ and all of its sub-devices.
+ If no default mac address is provided, the fail-safe PMD will read the MAC
+ address of the first of its sub-device to be successfully probed and use it as
+ its default MAC address, trying to set it to all of its other sub-devices.
+ If no sub-device was successfully probed at initialization, then a random MAC
+ address is generated, that will be subsequently applied to all sub-device once
+ they are probed.
+
+Usage example
+~~~~~~~~~~~~~
+
+This section shows some example of using **testpmd** with a fail-safe PMD.
+
+#. Request huge pages:
+
+ .. code-block:: console
+
+ echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
+
+#. Start testpmd
+
+ .. code-block:: console
+
+ $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
+ --vdev='net_failsafe0,mac=de:ad:be:ef:01:02,dev(84:00.0),dev(net_ring0,nodeaction=r1:0:CREATE)' -- \
+ -i
+
+Using the Fail-safe PMD from an application
+-------------------------------------------
+
+This driver strives to be as seamless as possible to existing applications, in
+order to propose the hotplug functionality in the easiest way possible.
+
+Care must be taken, however, to respect the **ether** API concerning device
+access, and in particular, using the ``RTE_ETH_FOREACH_DEV`` macro to iterate
+over ethernet devices, instead of directly accessing them or by writing one's
+own device iterator.
new file mode 100644
@@ -0,0 +1,24 @@
+;
+; Supported features of the 'fail-safe' poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Link status = Y
+Queue start/stop = Y
+MTU update = Y
+Jumbo frame = Y
+Promiscuous mode = Y
+Allmulticast mode = Y
+Unicast MAC filter = Y
+Multicast MAC filter = Y
+VLAN filter = Y
+Packet type parsing = Y
+Basic stats = Y
+Stats per queue = Y
+ARMv7 = Y
+ARMv8 = Y
+Power8 = Y
+x86-32 = Y
+x86-64 = Y
+Usage doc = Y
@@ -64,6 +64,7 @@ Network Interface Controller Drivers
vhost
vmxnet3
pcap_ring
+ fail_safe
**Figures**
@@ -59,6 +59,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += ena
DEPDIRS-ena = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += enic
DEPDIRS-enic = $(core-libs) librte_hash
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe
+DEPDIRS-failsafe = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += fm10k
DEPDIRS-fm10k = $(core-libs) librte_hash
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e
new file mode 100644
@@ -0,0 +1,72 @@
+# BSD LICENSE
+#
+# Copyright 2017 6WIND S.A.
+# Copyright 2017 Mellanox.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name
+LIB = librte_pmd_failsafe.a
+
+# Sources are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_args.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_eal.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_ops.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += failsafe_rxtx.c
+
+# No exported include files
+
+# This lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_kvargs
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += lib/librte_mbuf
+
+ifneq ($(DEBUG),)
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG := y
+endif
+
+# Basic CFLAGS:
+CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -I.
+CFLAGS += -D_BSD_SOURCE
+CFLAGS += -D_XOPEN_SOURCE=700
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -Wno-strict-prototypes
+CFLAGS += -pedantic -DPEDANTIC
+
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_FAILSAFE_DEBUG),y)
+CFLAGS += -g -UNDEBUG
+else
+CFLAGS += -O3
+CFLAGS += -DNDEBUG
+endif
+
+include $(RTE_SDK)/mk/rte.lib.mk
new file mode 100644
@@ -0,0 +1,231 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <rte_alarm.h>
+#include <rte_malloc.h>
+#include <rte_ethdev.h>
+#include <rte_ethdev_vdev.h>
+#include <rte_devargs.h>
+#include <rte_kvargs.h>
+#include <rte_vdev.h>
+
+#include "failsafe_private.h"
+
+const char pmd_failsafe_driver_name[] = FAILSAFE_DRIVER_NAME;
+static const struct rte_eth_link eth_link = {
+ .link_speed = ETH_SPEED_NUM_10G,
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = ETH_LINK_UP,
+ .link_autoneg = ETH_LINK_SPEED_AUTONEG,
+};
+
+static int
+fs_sub_device_create(struct rte_eth_dev *dev,
+ const char *params)
+{
+ uint8_t nb_subs;
+ int ret;
+
+ ret = failsafe_args_count_subdevice(dev, params);
+ if (ret)
+ return ret;
+ if (PRIV(dev)->subs_tail > FAILSAFE_MAX_ETHPORTS) {
+ ERROR("Cannot allocate more than %d ports",
+ FAILSAFE_MAX_ETHPORTS);
+ return -ENOSPC;
+ }
+ nb_subs = PRIV(dev)->subs_tail;
+ PRIV(dev)->subs = rte_zmalloc(NULL,
+ sizeof(struct sub_device) * nb_subs,
+ RTE_CACHE_LINE_SIZE);
+ if (PRIV(dev)->subs == NULL) {
+ ERROR("Could not allocate sub_devices");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void
+fs_sub_device_free(struct rte_eth_dev *dev)
+{
+ rte_free(PRIV(dev)->subs);
+}
+
+static int
+fs_eth_dev_create(struct rte_vdev_device *vdev)
+{
+ struct rte_eth_dev *dev;
+ struct ether_addr *mac;
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ const char *params;
+ unsigned int socket_id;
+ uint8_t i;
+ int ret;
+
+ dev = NULL;
+ priv = NULL;
+ params = rte_vdev_device_args(vdev);
+ socket_id = rte_socket_id();
+ INFO("Creating fail-safe device on NUMA socket %u",
+ socket_id);
+ dev = rte_eth_vdev_allocate(vdev, sizeof(*priv));
+ if (dev == NULL) {
+ ERROR("Unable to allocate rte_eth_dev");
+ return -1;
+ }
+ priv = dev->data->dev_private;
+ PRIV(dev)->dev = dev;
+ dev->dev_ops = &failsafe_ops;
+ TAILQ_INIT(&dev->link_intr_cbs);
+ dev->data->dev_flags = 0x0;
+ dev->data->mac_addrs = &PRIV(dev)->mac_addrs[0];
+ dev->data->dev_link = eth_link;
+ PRIV(dev)->nb_mac_addr = 1;
+ dev->rx_pkt_burst = (eth_rx_burst_t)&failsafe_rx_burst;
+ dev->tx_pkt_burst = (eth_tx_burst_t)&failsafe_tx_burst;
+ if (params == NULL) {
+ ERROR("This PMD requires sub-devices, none provided");
+ goto free_dev;
+ }
+ ret = fs_sub_device_create(dev, params);
+ if (ret) {
+ ERROR("Could not allocate sub_devices");
+ goto free_dev;
+ }
+ ret = failsafe_args_parse(dev, params);
+ if (ret)
+ goto free_subs;
+ ret = failsafe_eal_init(dev);
+ if (ret)
+ goto free_args;
+ mac = &dev->data->mac_addrs[0];
+ if (mac_from_arg) {
+ /*
+ * If MAC address was provided as a parameter,
+ * apply to all probed slaves.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ ret = rte_eth_dev_default_mac_addr_set(PORT_ID(sdev),
+ mac);
+ if (ret) {
+ ERROR("Failed to set default MAC address");
+ goto free_args;
+ }
+ }
+ } else {
+ /*
+ * Use the ether_addr from first probed
+ * device, either preferred or fallback.
+ */
+ FOREACH_SUBDEV(sdev, i, dev)
+ if (sdev->state >= DEV_PROBED) {
+ ether_addr_copy(Ð(sdev)->data->mac_addrs[0],
+ mac);
+ break;
+ }
+ /*
+ * If no device has been probed and no ether_addr
+ * has been provided on the command line, use a random
+ * valid one.
+ * It will be applied during future slave state syncs to
+ * probed slaves.
+ */
+ if (i == priv->subs_tail)
+ eth_random_addr(&mac->addr_bytes[0]);
+ }
+ INFO("MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ mac->addr_bytes[0], mac->addr_bytes[1],
+ mac->addr_bytes[2], mac->addr_bytes[3],
+ mac->addr_bytes[4], mac->addr_bytes[5]);
+ return 0;
+free_args:
+ failsafe_args_free(dev);
+free_subs:
+ fs_sub_device_free(dev);
+free_dev:
+ rte_eth_dev_release_port(dev);
+ return -1;
+}
+
+static int
+fs_rte_eth_free(const char *name)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ dev = rte_eth_dev_allocated(name);
+ if (dev == NULL)
+ return -ENODEV;
+ ret = failsafe_eal_uninit(dev);
+ if (ret)
+ ERROR("Error while uninitializing sub-EAL");
+ failsafe_args_free(dev);
+ fs_sub_device_free(dev);
+ rte_free(PRIV(dev));
+ rte_eth_dev_release_port(dev);
+ return ret;
+}
+
+static int
+rte_pmd_failsafe_probe(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (vdev == NULL)
+ return -EINVAL;
+ INFO("Initializing " FAILSAFE_DRIVER_NAME " for %s",
+ name);
+ return fs_eth_dev_create(vdev);
+}
+
+static int
+rte_pmd_failsafe_remove(struct rte_vdev_device *vdev)
+{
+ const char *name;
+
+ name = rte_vdev_device_name(vdev);
+ if (name == NULL)
+ return -EINVAL;
+ INFO("Uninitializing " FAILSAFE_DRIVER_NAME " for %s", name);
+ return fs_rte_eth_free(name);
+}
+
+static struct rte_vdev_driver failsafe_drv = {
+ .probe = rte_pmd_failsafe_probe,
+ .remove = rte_pmd_failsafe_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_failsafe, failsafe_drv);
+RTE_PMD_REGISTER_ALIAS(net_failsafe, eth_failsafe);
+RTE_PMD_REGISTER_PARAM_STRING(net_failsafe, PMD_FAILSAFE_PARAM_STRING);
new file mode 100644
@@ -0,0 +1,331 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <string.h>
+#include <errno.h>
+
+#include <rte_devargs.h>
+#include <rte_malloc.h>
+#include <rte_kvargs.h>
+
+#include "failsafe_private.h"
+
+#define DEVARGS_MAXLEN 4096
+
+/* Callback used when a new device is found in devargs */
+typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
+ uint8_t head);
+
+int mac_from_arg;
+
+const char *pmd_failsafe_init_parameters[] = {
+ PMD_FAILSAFE_MAC_KVARG,
+ NULL,
+};
+
+/*
+ * input: text.
+ * output: 0: if text[0] != '(',
+ * 0: if there are no corresponding ')'
+ * n: distance to corresponding ')' otherwise
+ */
+static size_t
+closing_paren(const char *text)
+{
+ int nb_open = 0;
+ size_t i = 0;
+
+ while (text[i] != '\0') {
+ if (text[i] == '(')
+ nb_open++;
+ if (text[i] == ')')
+ nb_open--;
+ if (nb_open == 0)
+ return i;
+ i++;
+ }
+ return 0;
+}
+
+static int
+fs_parse_device(struct sub_device *sdev, char *args)
+{
+ struct rte_devargs *d;
+ int ret;
+
+ d = &sdev->devargs;
+ DEBUG("%s", args);
+ ret = rte_eal_devargs_parse(args, d);
+ if (ret) {
+ DEBUG("devargs parsing failed with code %d", ret);
+ return ret;
+ }
+ sdev->bus = d->bus;
+ sdev->state = DEV_PARSED;
+ return 0;
+}
+
+static int
+fs_parse_device_param(struct rte_eth_dev *dev, const char *param,
+ uint8_t head)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ char *args = NULL;
+ size_t a, b;
+ int ret;
+
+ priv = PRIV(dev);
+ a = 0;
+ b = 0;
+ ret = 0;
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ a = b;
+ b += closing_paren(¶m[b]);
+ if (a == b) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ a += 1;
+ args = strndup(¶m[a], b - a);
+ if (args == NULL) {
+ ERROR("Not enough memory for parameter parsing");
+ return -ENOMEM;
+ }
+ sdev = &priv->subs[head];
+ if (strncmp(param, "dev", 3) == 0) {
+ ret = fs_parse_device(sdev, args);
+ if (ret)
+ goto free_args;
+ } else {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+free_args:
+ free(args);
+ return ret;
+}
+
+static int
+fs_parse_sub_devices(parse_cb *cb,
+ struct rte_eth_dev *dev, const char *params)
+{
+ size_t a, b;
+ uint8_t head;
+ int ret;
+
+ a = 0;
+ head = 0;
+ ret = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',') {
+ a = b + 1;
+ continue;
+ }
+ if (params[b] == '(') {
+ size_t start = b;
+
+ b += closing_paren(¶ms[b]);
+ if (b == start) {
+ ERROR("Dangling parenthesis");
+ return -EINVAL;
+ }
+ ret = (*cb)(dev, ¶ms[a], head);
+ if (ret)
+ return ret;
+ head += 1;
+ b += 1;
+ if (params[b] == '\0')
+ return 0;
+ }
+ a = b + 1;
+ }
+ return 0;
+}
+
+static int
+fs_remove_sub_devices_definition(char params[DEVARGS_MAXLEN])
+{
+ char buffer[DEVARGS_MAXLEN] = {0};
+ size_t a, b;
+ int i;
+
+ a = 0;
+ i = 0;
+ while (params[a] != '\0') {
+ b = a;
+ while (params[b] != '(' &&
+ params[b] != ',' &&
+ params[b] != '\0')
+ b++;
+ if (b == a) {
+ ERROR("Invalid parameter");
+ return -EINVAL;
+ }
+ if (params[b] == ',' || params[b] == '\0')
+ i += snprintf(&buffer[i], b - a + 1, "%s", ¶ms[a]);
+ if (params[b] == '(') {
+ size_t start = b;
+ b += closing_paren(¶ms[b]);
+ if (b == start)
+ return -EINVAL;
+ b += 1;
+ if (params[b] == '\0')
+ goto out;
+ }
+ a = b + 1;
+ }
+out:
+ snprintf(params, DEVARGS_MAXLEN, "%s", buffer);
+ return 0;
+}
+
+static int
+fs_get_mac_addr_arg(const char *key __rte_unused,
+ const char *value, void *out)
+{
+ struct ether_addr *ea = out;
+ int ret;
+
+ if ((value == NULL) || (out == NULL))
+ return -EINVAL;
+ ret = sscanf(value, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+ &ea->addr_bytes[0], &ea->addr_bytes[1],
+ &ea->addr_bytes[2], &ea->addr_bytes[3],
+ &ea->addr_bytes[4], &ea->addr_bytes[5]);
+ return ret != ETHER_ADDR_LEN;
+}
+
+int
+failsafe_args_parse(struct rte_eth_dev *dev, const char *params)
+{
+ struct fs_priv *priv;
+ char mut_params[DEVARGS_MAXLEN] = "";
+ struct rte_kvargs *kvlist = NULL;
+ unsigned int arg_count;
+ size_t n;
+ int ret;
+
+ if (dev == NULL || params == NULL)
+ return -EINVAL;
+ priv = PRIV(dev);
+ ret = 0;
+ priv->subs_tx = FAILSAFE_MAX_ETHPORTS;
+ /* default parameters */
+ mac_from_arg = 0;
+ n = snprintf(mut_params, sizeof(mut_params), "%s", params);
+ if (n >= sizeof(mut_params)) {
+ ERROR("Parameter string too long (>=%zu)",
+ sizeof(mut_params));
+ return -ENOMEM;
+ }
+ ret = fs_parse_sub_devices(fs_parse_device_param,
+ dev, params);
+ if (ret < 0)
+ return ret;
+ ret = fs_remove_sub_devices_definition(mut_params);
+ if (ret < 0)
+ return ret;
+ if (strnlen(mut_params, sizeof(mut_params)) > 0) {
+ kvlist = rte_kvargs_parse(mut_params,
+ pmd_failsafe_init_parameters);
+ if (kvlist == NULL) {
+ ERROR("Error parsing parameters, usage:\n"
+ PMD_FAILSAFE_PARAM_STRING);
+ return -1;
+ }
+ /* MAC addr */
+ arg_count = rte_kvargs_count(kvlist,
+ PMD_FAILSAFE_MAC_KVARG);
+ if (arg_count == 1) {
+ ret = rte_kvargs_process(kvlist,
+ PMD_FAILSAFE_MAC_KVARG,
+ &fs_get_mac_addr_arg,
+ &dev->data->mac_addrs[0]);
+ if (ret < 0)
+ goto free_kvlist;
+ mac_from_arg = 1;
+ }
+ }
+free_kvlist:
+ rte_kvargs_free(kvlist);
+ return ret;
+}
+
+void
+failsafe_args_free(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ free(sdev->devargs.args);
+ sdev->devargs.args = NULL;
+ }
+}
+
+static int
+fs_count_device(struct rte_eth_dev *dev, const char *param,
+ uint8_t head __rte_unused)
+{
+ size_t b = 0;
+
+ while (param[b] != '(' &&
+ param[b] != '\0')
+ b++;
+ if (strncmp(param, "dev", b) &&
+ strncmp(param, "exec", b)) {
+ ERROR("Unrecognized device type: %.*s", (int)b, param);
+ return -EINVAL;
+ }
+ PRIV(dev)->subs_tail += 1;
+ return 0;
+}
+
+int
+failsafe_args_count_subdevice(struct rte_eth_dev *dev,
+ const char *params)
+{
+ return fs_parse_sub_devices(fs_count_device,
+ dev, params);
+}
new file mode 100644
@@ -0,0 +1,160 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev *
+fs_eth_dev_from_name(const char *name)
+{
+ struct rte_eth_dev *dev;
+ uint8_t i;
+
+ RTE_ETH_FOREACH_DEV(i) {
+ dev = &rte_eth_devices[i];
+ if (!strcmp(dev->device->name, name))
+ return dev;
+ }
+ return NULL;
+}
+
+static int
+fs_bus_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_device device;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PARSED)
+ continue;
+ device.name = sdev->devargs.name;
+ device.devargs = &sdev->devargs;
+ if (!sdev->bus->attach) {
+ ERROR("Bus %s used for sub_device %d does not support hotplug, skipping",
+ sdev->bus->name, i);
+ return -EINVAL;
+ }
+ ret = sdev->bus->attach(&device);
+ if (ret) {
+ ERROR("sub_device %d probe failed %s%s%s", i,
+ errno ? "(" : "",
+ errno ? strerror(errno) : "",
+ errno ? ")" : "");
+ continue;
+ }
+ ETH(sdev) = fs_eth_dev_from_name(device.name);
+ if (ETH(sdev) == NULL) {
+ ERROR("sub_device %d init went wrong", i);
+ return -ENODEV;
+ }
+ sdev->dev = ETH(sdev)->device;
+ ETH(sdev)->state = RTE_ETH_DEV_DEFERRED;
+ sdev->state = DEV_PROBED;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_init(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ ret = fs_bus_init(dev);
+ if (ret)
+ return ret;
+ /*
+ * We only update TX_SUBDEV if we are not started.
+ * If a sub_device is emitting, we will switch the TX_SUBDEV to the
+ * preferred port only upon starting it, so that the switch is smoother.
+ */
+ if (PREFERRED_SUBDEV(dev)->state >= DEV_PROBED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev) &&
+ (TX_SUBDEV(dev) == NULL ||
+ (TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED))) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_PROBED) ||
+ TX_SUBDEV(dev) == NULL) {
+ /* Using first probed device */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ DEBUG("Switching tx_dev to sub_device %d",
+ i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int
+fs_bus_uninit(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev = NULL;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ if (!sdev->bus->detach) {
+ ERROR("Bus does not support device removal for sub_device %u (%s)",
+ i, sdev->devargs.name);
+ continue;
+ }
+ ret = sdev->bus->detach(sdev->dev);
+ if (ret) {
+ ERROR("Failed to remove requested device %s",
+ sdev->devargs.name);
+ continue;
+ }
+ sdev->state = DEV_PROBED - 1;
+ }
+ return 0;
+}
+
+int
+failsafe_eal_uninit(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = fs_bus_uninit(dev);
+ if (ret)
+ return ret;
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,663 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <stdint.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+
+#include "failsafe_private.h"
+
+static struct rte_eth_dev_info default_infos = {
+ .driver_name = pmd_failsafe_driver_name,
+ /* Max possible number of elements */
+ .max_rx_pktlen = UINT32_MAX,
+ .max_rx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_tx_queues = RTE_MAX_QUEUES_PER_PORT,
+ .max_mac_addrs = FAILSAFE_MAX_ETHADDR,
+ .max_hash_mac_addrs = UINT32_MAX,
+ .max_vfs = UINT16_MAX,
+ .max_vmdq_pools = UINT16_MAX,
+ .rx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ .tx_desc_lim = {
+ .nb_max = UINT16_MAX,
+ .nb_min = 0,
+ .nb_align = 1,
+ .nb_seg_max = UINT16_MAX,
+ .nb_mtu_seg_max = UINT16_MAX,
+ },
+ /* Set of understood capabilities */
+ .rx_offload_capa = 0x0,
+ .tx_offload_capa = 0x0,
+ .flow_type_rss_offloads = 0x0,
+};
+
+static int
+fs_dev_configure(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_PROBED)
+ continue;
+ DEBUG("Configuring sub-device %d", i);
+ ret = rte_eth_dev_configure(PORT_ID(sdev),
+ dev->data->nb_rx_queues,
+ dev->data->nb_tx_queues,
+ &dev->data->dev_conf);
+ if (ret) {
+ ERROR("Could not configure sub_device %d", i);
+ return ret;
+ }
+ sdev->state = DEV_ACTIVE;
+ }
+ return 0;
+}
+
+static int
+fs_dev_start(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV(sdev, i, dev) {
+ if (sdev->state != DEV_ACTIVE)
+ continue;
+ DEBUG("Starting sub_device %d", i);
+ ret = rte_eth_dev_start(PORT_ID(sdev));
+ if (ret)
+ return ret;
+ sdev->state = DEV_STARTED;
+ }
+ if (PREFERRED_SUBDEV(dev)->state == DEV_STARTED) {
+ if (TX_SUBDEV(dev) != PREFERRED_SUBDEV(dev)) {
+ DEBUG("Switching tx_dev to preferred sub_device");
+ PRIV(dev)->subs_tx = 0;
+ }
+ } else {
+ if ((TX_SUBDEV(dev) && TX_SUBDEV(dev)->state < DEV_STARTED) ||
+ TX_SUBDEV(dev) == NULL) {
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ DEBUG("Switching tx_dev to sub_device %d", i);
+ PRIV(dev)->subs_tx = i;
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static void
+fs_dev_stop(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_STARTED) {
+ rte_eth_dev_stop(PORT_ID(sdev));
+ sdev->state = DEV_STARTED - 1;
+ }
+}
+
+static int
+fs_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_up on sub_device %d", i);
+ ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_up failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_link_down on sub_device %d", i);
+ ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_link_down failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void fs_dev_free_queues(struct rte_eth_dev *dev);
+static void
+fs_dev_close(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Closing sub_device %d", i);
+ rte_eth_dev_close(PORT_ID(sdev));
+ sdev->state = DEV_ACTIVE - 1;
+ }
+ fs_dev_free_queues(dev);
+}
+
+static void
+fs_rx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct rxq *rxq;
+
+ if (queue == NULL)
+ return;
+ rxq = queue;
+ dev = rxq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, rx_queue_release)
+ (ETH(sdev)->data->rx_queues[rxq->qid]);
+ dev->data->rx_queues[rxq->qid] = NULL;
+ rte_free(rxq);
+}
+
+static int
+fs_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool)
+{
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ uint8_t i;
+ int ret;
+
+ rxq = dev->data->rx_queues[rx_queue_id];
+ if (rxq != NULL) {
+ fs_rx_queue_release(rxq);
+ dev->data->rx_queues[rx_queue_id] = NULL;
+ }
+ rxq = rte_zmalloc(NULL, sizeof(*rxq),
+ RTE_CACHE_LINE_SIZE);
+ if (rxq == NULL)
+ return -ENOMEM;
+ rxq->qid = rx_queue_id;
+ rxq->socket_id = socket_id;
+ rxq->info.mp = mb_pool;
+ rxq->info.conf = *rx_conf;
+ rxq->info.nb_desc = nb_rx_desc;
+ rxq->priv = PRIV(dev);
+ dev->data->rx_queues[rx_queue_id] = rxq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_rx_queue_setup(PORT_ID(sdev),
+ rx_queue_id,
+ nb_rx_desc, socket_id,
+ rx_conf, mb_pool);
+ if (ret) {
+ ERROR("RX queue setup failed for sub_device %d", i);
+ goto free_rxq;
+ }
+ }
+ return 0;
+free_rxq:
+ fs_rx_queue_release(rxq);
+ return ret;
+}
+
+static void
+fs_tx_queue_release(void *queue)
+{
+ struct rte_eth_dev *dev;
+ struct sub_device *sdev;
+ uint8_t i;
+ struct txq *txq;
+
+ if (queue == NULL)
+ return;
+ txq = queue;
+ dev = txq->priv->dev;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ SUBOPS(sdev, tx_queue_release)
+ (ETH(sdev)->data->tx_queues[txq->qid]);
+ dev->data->tx_queues[txq->qid] = NULL;
+ rte_free(txq);
+}
+
+static int
+fs_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ uint8_t i;
+ int ret;
+
+ txq = dev->data->tx_queues[tx_queue_id];
+ if (txq != NULL) {
+ fs_tx_queue_release(txq);
+ dev->data->tx_queues[tx_queue_id] = NULL;
+ }
+ txq = rte_zmalloc("ethdev TX queue", sizeof(*txq),
+ RTE_CACHE_LINE_SIZE);
+ if (txq == NULL)
+ return -ENOMEM;
+ txq->qid = tx_queue_id;
+ txq->socket_id = socket_id;
+ txq->info.conf = *tx_conf;
+ txq->info.nb_desc = nb_tx_desc;
+ txq->priv = PRIV(dev);
+ dev->data->tx_queues[tx_queue_id] = txq;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_tx_queue_setup(PORT_ID(sdev),
+ tx_queue_id,
+ nb_tx_desc, socket_id,
+ tx_conf);
+ if (ret) {
+ ERROR("TX queue setup failed for sub_device %d", i);
+ goto free_txq;
+ }
+ }
+ return 0;
+free_txq:
+ fs_tx_queue_release(txq);
+ return ret;
+}
+
+static void
+fs_dev_free_queues(struct rte_eth_dev *dev)
+{
+ uint16_t i;
+
+ for (i = 0; i < dev->data->nb_rx_queues; i++) {
+ fs_rx_queue_release(dev->data->rx_queues[i]);
+ dev->data->rx_queues[i] = NULL;
+ }
+ dev->data->nb_rx_queues = 0;
+ for (i = 0; i < dev->data->nb_tx_queues; i++) {
+ fs_tx_queue_release(dev->data->tx_queues[i]);
+ dev->data->tx_queues[i] = NULL;
+ }
+ dev->data->nb_tx_queues = 0;
+}
+
+static void
+fs_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_enable(PORT_ID(sdev));
+}
+
+static void
+fs_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_promiscuous_disable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_enable(PORT_ID(sdev));
+}
+
+static void
+fs_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_allmulticast_disable(PORT_ID(sdev));
+}
+
+static int
+fs_link_update(struct rte_eth_dev *dev,
+ int wait_to_complete)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling link_update on sub_device %d", i);
+ ret = (SUBOPS(sdev, link_update))(ETH(sdev), wait_to_complete);
+ if (ret && ret != -1) {
+ ERROR("Link update failed for sub_device %d with error %d",
+ i, ret);
+ return ret;
+ }
+ }
+ if (TX_SUBDEV(dev)) {
+ struct rte_eth_link *l1;
+ struct rte_eth_link *l2;
+
+ l1 = &dev->data->dev_link;
+ l2 = Ð(TX_SUBDEV(dev))->data->dev_link;
+ if (memcmp(l1, l2, sizeof(*l1))) {
+ *l1 = *l2;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static void
+fs_stats_get(struct rte_eth_dev *dev,
+ struct rte_eth_stats *stats)
+{
+ memset(stats, 0, sizeof(*stats));
+ if (TX_SUBDEV(dev) == NULL)
+ return;
+ rte_eth_stats_get(PORT_ID(TX_SUBDEV(dev)), stats);
+}
+
+static void
+fs_stats_reset(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_stats_reset(PORT_ID(sdev));
+}
+
+/**
+ * Fail-safe dev_infos_get rules:
+ *
+ * No sub_device:
+ * Numerables:
+ * Use the maximum possible values for any field, so as not
+ * to impede any further configuration effort.
+ * Capabilities:
+ * Limits capabilities to those that are understood by the
+ * fail-safe PMD. This understanding stems from the fail-safe
+ * being capable of verifying that the related capability is
+ * expressed within the device configuration (struct rte_eth_conf).
+ *
+ * At least one probed sub_device:
+ * Numerables:
+ * Uses values from the active probed sub_device
+ * The rationale here is that if any sub_device is less capable
+ * (for example concerning the number of queues) than the active
+ * sub_device, then its subsequent configuration will fail.
+ * It is impossible to foresee this failure when the failing sub_device
+ * is supposed to be plugged-in later on, so the configuration process
+ * is the single point of failure and error reporting.
+ * Capabilities:
+ * Uses a logical AND of RX capabilities among
+ * all sub_devices and the default capabilities.
+ * Uses a logical AND of TX capabilities among
+ * the active probed sub_device and the default capabilities.
+ *
+ */
+static void
+fs_dev_infos_get(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *infos)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL) {
+ DEBUG("No probed device, using default infos");
+ rte_memcpy(&PRIV(dev)->infos, &default_infos,
+ sizeof(default_infos));
+ } else {
+ uint32_t rx_offload_capa;
+
+ rx_offload_capa = default_infos.rx_offload_capa;
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_PROBED) {
+ rte_eth_dev_info_get(PORT_ID(sdev),
+ &PRIV(dev)->infos);
+ rx_offload_capa &= PRIV(dev)->infos.rx_offload_capa;
+ }
+ sdev = TX_SUBDEV(dev);
+ rte_eth_dev_info_get(PORT_ID(sdev), &PRIV(dev)->infos);
+ PRIV(dev)->infos.rx_offload_capa = rx_offload_capa;
+ PRIV(dev)->infos.tx_offload_capa &=
+ default_infos.tx_offload_capa;
+ PRIV(dev)->infos.flow_type_rss_offloads &=
+ default_infos.flow_type_rss_offloads;
+ }
+ rte_memcpy(infos, &PRIV(dev)->infos, sizeof(*infos));
+}
+
+static const uint32_t *
+fs_dev_supported_ptypes_get(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ struct rte_eth_dev *edev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return NULL;
+ edev = ETH(sdev);
+ /* ENOTSUP: counts as no supported ptypes */
+ if (SUBOPS(sdev, dev_supported_ptypes_get) == NULL)
+ return NULL;
+ /*
+ * The API does not permit to do a clean AND of all ptypes,
+ * It is also incomplete by design and we do not really care
+ * to have a best possible value in this context.
+ * We just return the ptypes of the device of highest
+ * priority, usually the PREFERRED device.
+ */
+ return SUBOPS(sdev, dev_supported_ptypes_get)(edev);
+}
+
+static int
+fs_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
+ ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_set_mtu failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_vlan_filter on sub_device %d", i);
+ ret = rte_eth_dev_vlan_filter(PORT_ID(sdev), vlan_id, on);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_vlan_filter failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int
+fs_flow_ctrl_get(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+
+ sdev = TX_SUBDEV(dev);
+ if (sdev == NULL)
+ return 0;
+ if (SUBOPS(sdev, flow_ctrl_get) == NULL)
+ return -ENOTSUP;
+ return SUBOPS(sdev, flow_ctrl_get)(ETH(sdev), fc_conf);
+}
+
+static int
+fs_flow_ctrl_set(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ DEBUG("Calling rte_eth_dev_flow_ctrl_set on sub_device %d", i);
+ ret = rte_eth_dev_flow_ctrl_set(PORT_ID(sdev), fc_conf);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_flow_ctrl_set failed for sub_device %d"
+ " with error %d", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void
+fs_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ /* No check: already done within the rte_eth_dev_mac_addr_remove
+ * call for the fail-safe device.
+ */
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_mac_addr_remove(PORT_ID(sdev),
+ &dev->data->mac_addrs[index]);
+ PRIV(dev)->mac_addr_pool[index] = 0;
+}
+
+static int
+fs_mac_addr_add(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint32_t index,
+ uint32_t vmdq)
+{
+ struct sub_device *sdev;
+ int ret;
+ uint8_t i;
+
+ assert(index < FAILSAFE_MAX_ETHADDR);
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), mac_addr, vmdq);
+ if (ret) {
+ ERROR("Operation rte_eth_dev_mac_addr_add failed for sub_device %"
+ PRIu8 " with error %d", i, ret);
+ return ret;
+ }
+ }
+ if (index >= PRIV(dev)->nb_mac_addr) {
+ DEBUG("Growing mac_addrs array");
+ PRIV(dev)->nb_mac_addr = index;
+ }
+ PRIV(dev)->mac_addr_pool[index] = vmdq;
+ return 0;
+}
+
+static void
+fs_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+
+ FOREACH_SUBDEV_ST(sdev, i, dev, DEV_ACTIVE)
+ rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
+}
+
+const struct eth_dev_ops failsafe_ops = {
+ .dev_configure = fs_dev_configure,
+ .dev_start = fs_dev_start,
+ .dev_stop = fs_dev_stop,
+ .dev_set_link_down = fs_dev_set_link_down,
+ .dev_set_link_up = fs_dev_set_link_up,
+ .dev_close = fs_dev_close,
+ .promiscuous_enable = fs_promiscuous_enable,
+ .promiscuous_disable = fs_promiscuous_disable,
+ .allmulticast_enable = fs_allmulticast_enable,
+ .allmulticast_disable = fs_allmulticast_disable,
+ .link_update = fs_link_update,
+ .stats_get = fs_stats_get,
+ .stats_reset = fs_stats_reset,
+ .dev_infos_get = fs_dev_infos_get,
+ .dev_supported_ptypes_get = fs_dev_supported_ptypes_get,
+ .mtu_set = fs_mtu_set,
+ .vlan_filter_set = fs_vlan_filter_set,
+ .rx_queue_setup = fs_rx_queue_setup,
+ .tx_queue_setup = fs_tx_queue_setup,
+ .rx_queue_release = fs_rx_queue_release,
+ .tx_queue_release = fs_tx_queue_release,
+ .flow_ctrl_get = fs_flow_ctrl_get,
+ .flow_ctrl_set = fs_flow_ctrl_set,
+ .mac_addr_remove = fs_mac_addr_remove,
+ .mac_addr_add = fs_mac_addr_add,
+ .mac_addr_set = fs_mac_addr_set,
+};
new file mode 100644
@@ -0,0 +1,227 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_FAILSAFE_PRIVATE_H_
+#define _RTE_ETH_FAILSAFE_PRIVATE_H_
+
+#include <rte_dev.h>
+#include <rte_ethdev.h>
+#include <rte_devargs.h>
+
+#define FAILSAFE_DRIVER_NAME "Fail-safe PMD"
+
+#define PMD_FAILSAFE_MAC_KVARG "mac"
+#define PMD_FAILSAFE_PARAM_STRING \
+ "dev(<ifc>)," \
+ "mac=mac_addr" \
+ ""
+
+#define FAILSAFE_PLUGIN_DEFAULT_TIMEOUT_MS 2000
+
+#define FAILSAFE_MAX_ETHPORTS 2
+#define FAILSAFE_MAX_ETHADDR 128
+
+/* TYPES */
+
+struct rxq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ /* id of last sub_device polled */
+ uint8_t last_polled;
+ unsigned int socket_id;
+ struct rte_eth_rxq_info info;
+};
+
+struct txq {
+ struct fs_priv *priv;
+ uint16_t qid;
+ unsigned int socket_id;
+ struct rte_eth_txq_info info;
+};
+
+enum dev_state {
+ DEV_UNDEFINED = 0,
+ DEV_PARSED,
+ DEV_PROBED,
+ DEV_ACTIVE,
+ DEV_STARTED,
+};
+
+struct sub_device {
+ /* Exhaustive DPDK device description */
+ struct rte_devargs devargs;
+ struct rte_bus *bus;
+ struct rte_device *dev;
+ struct rte_eth_dev *edev;
+ /* Device state machine */
+ enum dev_state state;
+};
+
+struct fs_priv {
+ struct rte_eth_dev *dev;
+ /*
+ * Set of sub_devices.
+ * subs[0] is the preferred device
+ * any other is just another slave
+ */
+ struct sub_device *subs;
+ uint8_t subs_head; /* if head == tail, no subs */
+ uint8_t subs_tail; /* first invalid */
+ uint8_t subs_tx; /* current emitting device */
+ uint8_t current_probed;
+ /* current number of mac_addr slots allocated. */
+ uint32_t nb_mac_addr;
+ struct ether_addr mac_addrs[FAILSAFE_MAX_ETHADDR];
+ uint32_t mac_addr_pool[FAILSAFE_MAX_ETHADDR];
+ /* current capabilities */
+ struct rte_eth_dev_info infos;
+};
+
+/* RX / TX */
+
+uint16_t failsafe_rx_burst(void *rxq,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t failsafe_tx_burst(void *txq,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
+
+/* ARGS */
+
+int failsafe_args_parse(struct rte_eth_dev *dev, const char *params);
+void failsafe_args_free(struct rte_eth_dev *dev);
+int failsafe_args_count_subdevice(struct rte_eth_dev *dev, const char *params);
+
+/* EAL */
+
+int failsafe_eal_init(struct rte_eth_dev *dev);
+int failsafe_eal_uninit(struct rte_eth_dev *dev);
+
+/* GLOBALS */
+
+extern const char pmd_failsafe_driver_name[];
+extern const struct eth_dev_ops failsafe_ops;
+extern int mac_from_arg;
+
+/* HELPERS */
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PRIV(dev) \
+ ((struct fs_priv *)(dev)->data->dev_private)
+
+/* sdev: (struct sub_device *) */
+#define ETH(sdev) \
+ ((sdev)->edev)
+
+/* sdev: (struct sub_device *) */
+#define PORT_ID(sdev) \
+ (ETH(sdev)->data->port_id)
+
+/**
+ * Stateful iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ * state: (enum dev_state), minimum acceptable device state
+ */
+#define FOREACH_SUBDEV_ST(s, i, dev, state) \
+ for (i = fs_find_next((dev), 0, state); \
+ i < PRIV(dev)->subs_tail && (s = &PRIV(dev)->subs[i]); \
+ i = fs_find_next((dev), i + 1, state))
+
+/**
+ * Iterator construct over fail-safe sub-devices:
+ * s: (struct sub_device *), iterator
+ * i: (uint8_t), increment
+ * dev: (struct rte_eth_dev *), fail-safe ethdev
+ */
+#define FOREACH_SUBDEV(s, i, dev) \
+ FOREACH_SUBDEV_ST(s, i, dev, DEV_UNDEFINED)
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define PREFERRED_SUBDEV(dev) \
+ (&PRIV(dev)->subs[0])
+
+/* dev: (struct rte_eth_dev *) fail-safe device */
+#define TX_SUBDEV(dev) \
+ (PRIV(dev)->subs_tx >= PRIV(dev)->subs_tail ? NULL \
+ : (PRIV(dev)->subs[PRIV(dev)->subs_tx].state < DEV_PROBED ? NULL \
+ : &PRIV(dev)->subs[PRIV(dev)->subs_tx]))
+
+/**
+ * s: (struct sub_device *)
+ * ops: (struct eth_dev_ops) member
+ */
+#define SUBOPS(s, ops) \
+ (ETH(s)->dev_ops->ops)
+
+#ifndef NDEBUG
+#include <stdio.h>
+#define DEBUG__(m, ...) \
+ (fprintf(stderr, "%s:%d: %s(): " m "%c", \
+ __FILE__, __LINE__, __func__, __VA_ARGS__), \
+ (void)0)
+#define DEBUG_(...) \
+ (errno = ((int []){ \
+ *(volatile int *)&errno, \
+ (DEBUG__(__VA_ARGS__), 0) \
+ })[0])
+#define DEBUG(...) DEBUG_(__VA_ARGS__, '\n')
+#define INFO(...) DEBUG(__VA_ARGS__)
+#define WARN(...) DEBUG(__VA_ARGS__)
+#define ERROR(...) DEBUG(__VA_ARGS__)
+#else
+#define DEBUG(...) ((void)0)
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, "net_failsafe: " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, "WARNING: " __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, "ERROR: " __VA_ARGS__)
+#endif
+
+/* inlined functions */
+
+static inline uint8_t
+fs_find_next(struct rte_eth_dev *dev, uint8_t sid,
+ enum dev_state min_state)
+{
+ while (sid < PRIV(dev)->subs_tail) {
+ if (PRIV(dev)->subs[sid].state >= min_state)
+ break;
+ sid++;
+ }
+ if (sid >= PRIV(dev)->subs_tail)
+ return PRIV(dev)->subs_tail;
+ return sid;
+}
+
+#endif /* _RTE_ETH_FAILSAFE_PRIVATE_H_ */
new file mode 100644
@@ -0,0 +1,107 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2017 6WIND S.A.
+ * Copyright 2017 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_mbuf.h>
+#include <rte_ethdev.h>
+
+#include "failsafe_private.h"
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_rx_burst(void *queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct fs_priv *priv;
+ struct sub_device *sdev;
+ struct rxq *rxq;
+ void *sub_rxq;
+ uint16_t nb_rx;
+ uint8_t nb_polled, nb_subs;
+ uint8_t i;
+
+ rxq = queue;
+ priv = rxq->priv;
+ nb_subs = priv->subs_tail - priv->subs_head;
+ nb_polled = 0;
+ for (i = rxq->last_polled; nb_polled < nb_subs; nb_polled++) {
+ i++;
+ if (i == priv->subs_tail)
+ i = priv->subs_head;
+ sdev = &priv->subs[i];
+ if (unlikely(ETH(sdev) == NULL))
+ continue;
+ if (unlikely(ETH(sdev)->rx_pkt_burst == NULL))
+ continue;
+ if (unlikely(sdev->state != DEV_STARTED))
+ continue;
+ sub_rxq = ETH(sdev)->data->rx_queues[rxq->qid];
+ nb_rx = ETH(sdev)->
+ rx_pkt_burst(sub_rxq, rx_pkts, nb_pkts);
+ if (nb_rx) {
+ rxq->last_polled = i;
+ return nb_rx;
+ }
+ }
+ return 0;
+}
+
+/*
+ * TODO: write fast version,
+ * without additional checks, to be activated once
+ * everything has been verified to comply.
+ */
+uint16_t
+failsafe_tx_burst(void *queue,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ struct sub_device *sdev;
+ struct txq *txq;
+ void *sub_txq;
+
+ txq = queue;
+ sdev = TX_SUBDEV(txq->priv->dev);
+ if (unlikely(sdev == NULL))
+ return 0;
+ if (unlikely(ETH(sdev) == NULL))
+ return 0;
+ if (unlikely(ETH(sdev)->tx_pkt_burst == NULL))
+ return 0;
+ sub_txq = ETH(sdev)->data->tx_queues[txq->qid];
+ return ETH(sdev)->tx_pkt_burst(sub_txq, tx_pkts, nb_pkts);
+}
@@ -120,6 +120,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)