@@ -1149,7 +1149,7 @@ TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
* The callback function is called on RX with a burst of packets that have
* been received on the given port and queue.
*
- * @param port
+ * @param port_id
* The Ethernet port on which RX is being performed.
* @param queue
* The queue on the Ethernet port which is being used to receive the packets.
@@ -1165,7 +1165,7 @@ TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
* @return
* The number of packets returned to the user.
*/
-typedef uint16_t (*rte_rx_callback_fn)(uint16_t port, uint16_t queue,
+typedef uint16_t (*rte_rx_callback_fn)(uint16_t port_id, uint16_t queue,
struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts,
void *user_param);
@@ -1175,7 +1175,7 @@ typedef uint16_t (*rte_rx_callback_fn)(uint16_t port, uint16_t queue,
* The callback function is called on TX with a burst of packets immediately
* before the packets are put onto the hardware queue for transmission.
*
- * @param port
+ * @param port_id
* The Ethernet port on which TX is being performed.
* @param queue
* The queue on the Ethernet port which is being used to transmit the packets.
@@ -1189,7 +1189,7 @@ typedef uint16_t (*rte_rx_callback_fn)(uint16_t port, uint16_t queue,
* @return
* The number of packets to be written to the NIC.
*/
-typedef uint16_t (*rte_tx_callback_fn)(uint16_t port, uint16_t queue,
+typedef uint16_t (*rte_tx_callback_fn)(uint16_t port_id, uint16_t queue,
struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param);
struct rte_eth_rxtx_callback;
@@ -2515,7 +2515,7 @@ int rte_eth_dev_priority_flow_ctrl_set(uint16_t port_id,
* Add a MAC address to an internal array of addresses used to enable whitelist
* filtering to accept packets only if the destination MAC address matches.
*
- * @param port
+ * @param port_id
* The port identifier of the Ethernet device.
* @param mac_addr
* The MAC address to add.
@@ -2523,19 +2523,19 @@ int rte_eth_dev_priority_flow_ctrl_set(uint16_t port_id,
* VMDq pool index to associate address with (if VMDq is enabled). If VMDq is
* not enabled, this should be set to 0.
* @return
- * - (0) if successfully added or *mac_addr" was already added.
+ * - (0) if successfully added or *mac_addr* was already added.
* - (-ENOTSUP) if hardware doesn't support this feature.
* - (-ENODEV) if *port* is invalid.
* - (-ENOSPC) if no more MAC addresses can be added.
* - (-EINVAL) if MAC address is invalid.
*/
-int rte_eth_dev_mac_addr_add(uint16_t port, struct ether_addr *mac_addr,
+int rte_eth_dev_mac_addr_add(uint16_t port_id, struct ether_addr *mac_addr,
uint32_t pool);
/**
* Remove a MAC address from the internal array of addresses.
*
- * @param port
+ * @param port_id
* The port identifier of the Ethernet device.
* @param mac_addr
* MAC address to remove.
@@ -2545,12 +2545,12 @@ int rte_eth_dev_mac_addr_add(uint16_t port, struct ether_addr *mac_addr,
* - (-ENODEV) if *port* invalid.
* - (-EADDRINUSE) if attempting to remove the default MAC address
*/
-int rte_eth_dev_mac_addr_remove(uint16_t port, struct ether_addr *mac_addr);
+int rte_eth_dev_mac_addr_remove(uint16_t port_id, struct ether_addr *mac_addr);
/**
* Set the default MAC address.
*
- * @param port
+ * @param port_id
* The port identifier of the Ethernet device.
* @param mac_addr
* New default MAC address.
@@ -2560,13 +2560,13 @@ int rte_eth_dev_mac_addr_remove(uint16_t port, struct ether_addr *mac_addr);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if MAC address is invalid.
*/
-int rte_eth_dev_default_mac_addr_set(uint16_t port,
+int rte_eth_dev_default_mac_addr_set(uint16_t port_id,
struct ether_addr *mac_addr);
/**
* Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
*
- * @param port
+ * @param port_id
* The port identifier of the Ethernet device.
* @param reta_conf
* RETA to update.
@@ -2578,14 +2578,14 @@ int rte_eth_dev_default_mac_addr_set(uint16_t port,
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_rss_reta_update(uint16_t port,
+int rte_eth_dev_rss_reta_update(uint16_t port_id,
struct rte_eth_rss_reta_entry64 *reta_conf,
uint16_t reta_size);
/**
* Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
*
- * @param port
+ * @param port_id
* The port identifier of the Ethernet device.
* @param reta_conf
* RETA to query.
@@ -2597,7 +2597,7 @@ int rte_eth_dev_rss_reta_update(uint16_t port,
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_rss_reta_query(uint16_t port,
+int rte_eth_dev_rss_reta_query(uint16_t port_id,
struct rte_eth_rss_reta_entry64 *reta_conf,
uint16_t reta_size);
@@ -2606,7 +2606,7 @@ int rte_eth_dev_rss_reta_query(uint16_t port,
* MAC address, and the packet is routed to all VFs for which the RX mode is
* accept packets that match the unicast hash table.
*
- * @param port
+ * @param port_id
* The port identifier of the Ethernet device.
* @param addr
* Unicast MAC address.
@@ -2619,7 +2619,7 @@ int rte_eth_dev_rss_reta_query(uint16_t port,
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_uc_hash_table_set(uint16_t port, struct ether_addr *addr,
+int rte_eth_dev_uc_hash_table_set(uint16_t port_id, struct ether_addr *addr,
uint8_t on);
/**
@@ -2627,7 +2627,7 @@ int rte_eth_dev_uc_hash_table_set(uint16_t port, struct ether_addr *addr,
* Ethernet MAC addresses,the packet is routed to all VFs for which the RX
* mode is accept packets that match the unicast hash table.
*
- * @param port
+ * @param port_id
* The port identifier of the Ethernet device.
* @param on
* 1 - Set all unicast hash bitmaps for receiving all the Ethernet
@@ -2639,7 +2639,7 @@ int rte_eth_dev_uc_hash_table_set(uint16_t port, struct ether_addr *addr,
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_uc_all_hash_table_set(uint16_t port, uint8_t on);
+int rte_eth_dev_uc_all_hash_table_set(uint16_t port_id, uint8_t on);
/**
* Set a traffic mirroring rule on an Ethernet device