[dpdk-dev,78/80] net/sfc/base: add firmware image layout option
Checks
Commit Message
From: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
drivers/net/sfc/Makefile | 1 +
drivers/net/sfc/base/ef10_image.c | 20 ++++++++
drivers/net/sfc/base/ef10_signed_image_layout.h | 62 +++++++++++++++++++++++++
drivers/net/sfc/base/efx_check.h | 7 +++
drivers/net/sfc/base/meson.build | 1 +
drivers/net/sfc/efsys.h | 1 +
6 files changed, 92 insertions(+)
create mode 100644 drivers/net/sfc/base/ef10_image.c
create mode 100644 drivers/net/sfc/base/ef10_signed_image_layout.h
@@ -115,6 +115,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += siena_vpd.c
SRCS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += ef10_ev.c
SRCS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += ef10_filter.c
SRCS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += ef10_intr.c
+SRCS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += ef10_image.c
SRCS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += ef10_mac.c
SRCS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += ef10_mcdi.c
SRCS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += ef10_nic.c
new file mode 100644
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright (c) 2017-2018 Solarflare Communications Inc.
+ * All rights reserved.
+ */
+
+#include "efx.h"
+#include "efx_impl.h"
+
+#if EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2
+
+#if EFSYS_OPT_IMAGE_LAYOUT
+
+#include "ef10_signed_image_layout.h"
+
+
+
+#endif /* EFSYS_OPT_IMAGE_LAYOUT */
+
+#endif /* EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2 */
new file mode 100644
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright (c) 2016-2018 Solarflare Communications Inc.
+ * All rights reserved.
+ */
+
+/* These structures define the layouts for the signed firmware image binary
+ * saved in NVRAM. The original image is in the Cryptographic message
+ * syntax (CMS) format which contains the bootable firmware binary plus the
+ * signatures. The entire image is written into NVRAM to enable the firmware
+ * to validate the signatures. However, the bootrom still requires the
+ * bootable-image to start at offset 0 of the NVRAM partition. Hence the image
+ * is parsed upfront by host utilities (sfupdate) and written into nvram as
+ * 'signed_image_chunks' described by a header.
+ *
+ * This file is used by the MC as well as host-utilities (sfupdate).
+ */
+
+
+#ifndef CI_MGMT_SIGNED_IMAGE_LAYOUT_H
+#define CI_MGMT_SIGNED_IMAGE_LAYOUT_H
+
+/* Signed image chunk type identifiers */
+enum {
+ SIGNED_IMAGE_CHUNK_CMS_HEADER, /* CMS header describing the signed data */
+ SIGNED_IMAGE_CHUNK_REFLASH_HEADER, /* Reflash header */
+ SIGNED_IMAGE_CHUNK_IMAGE, /* Bootable binary image */
+ SIGNED_IMAGE_CHUNK_REFLASH_TRAILER, /* Reflash trailer */
+ SIGNED_IMAGE_CHUNK_SIGNATURE, /* Remaining contents of the signed image,
+ * including the certifiates and signature */
+ NUM_SIGNED_IMAGE_CHUNKS,
+};
+
+/* Magic */
+#define SIGNED_IMAGE_CHUNK_HDR_MAGIC 0xEF105161 /* EF10 SIGned Image */
+
+/* Initial version definition - version 1 */
+#define SIGNED_IMAGE_CHUNK_HDR_VERSION 0x1
+
+/* Header length is 32 bytes */
+#define SIGNED_IMAGE_CHUNK_HDR_LEN 32
+/* Structure describing the header of each chunk of signed image
+ * as stored in nvram
+ */
+typedef struct signed_image_chunk_hdr_e {
+ /* Magic field to recognise a valid entry
+ * should match SIGNED_IMAGE_CHUNK_HDR_MAGIC
+ */
+ uint32_t magic;
+ /* Version number of this header */
+ uint32_t version;
+ /* Chunk type identifier */
+ uint32_t id;
+ /* Chunk offset */
+ uint32_t offset;
+ /* Chunk length */
+ uint32_t len;
+ /* Reserved for future expansion of this structure - always set to zeros */
+ uint32_t reserved[3];
+} signed_image_chunk_hdr_t;
+
+#endif /* CI_MGMT_SIGNED_IMAGE_LAYOUT_H */
@@ -182,6 +182,13 @@
# endif
#endif /* EFSYS_OPT_NVRAM */
+#if EFSYS_OPT_IMAGE_LAYOUT
+/* Support signed image layout handling */
+# if !(EFSYS_OPT_MEDFORD || EFSYS_OPT_MEDFORD2)
+# error "IMAGE_LAYOUT requires MEDFORD or MEDFORD2"
+# endif
+#endif /* EFSYS_OPT_IMAGE_LAYOUT */
+
#ifdef EFSYS_OPT_NVRAM_FALCON_BOOTROM
# error "NVRAM_FALCON_BOOTROM is obsolete and is not supported."
#endif
@@ -34,6 +34,7 @@ sources = [
'siena_vpd.c',
'ef10_ev.c',
'ef10_filter.c',
+ 'ef10_image.c',
'ef10_intr.c',
'ef10_mac.c',
'ef10_mcdi.c',
@@ -178,6 +178,7 @@ prefetch_read_once(const volatile void *addr)
#define EFSYS_OPT_VPD 0
#define EFSYS_OPT_NVRAM 0
#define EFSYS_OPT_BOOTCFG 0
+#define EFSYS_OPT_IMAGE_LAYOUT 0
#define EFSYS_OPT_DIAG 0
#define EFSYS_OPT_RX_SCALE 1