[dpdk-dev,v2,1/6] vhost: export vhost feature definitions
Checks
Commit Message
This patch exports vhost-user protocol features to support device driver
development.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
---
lib/librte_vhost/rte_vhost.h | 8 ++++++++
lib/librte_vhost/vhost.h | 4 +---
lib/librte_vhost/vhost_user.c | 9 +++++----
lib/librte_vhost/vhost_user.h | 20 +++++++-------------
4 files changed, 21 insertions(+), 20 deletions(-)
Comments
> -----Original Message-----
> From: Wang, Zhihong
> Sent: Tuesday, February 13, 2018 5:21 PM
> To: dev@dpdk.org
> Cc: Tan, Jianfeng; Bie, Tiwei; maxime.coquelin@redhat.com;
> yliu@fridaylinux.org; Liang, Cunming; Wang, Xiao W; Daly, Dan; Wang,
> Zhihong
> Subject: [PATCH v2 1/6] vhost: export vhost feature definitions
>
> This patch exports vhost-user protocol features to support device driver
> development.
>
> Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
> ---
> lib/librte_vhost/rte_vhost.h | 8 ++++++++
> lib/librte_vhost/vhost.h | 4 +---
> lib/librte_vhost/vhost_user.c | 9 +++++----
> lib/librte_vhost/vhost_user.h | 20 +++++++-------------
> 4 files changed, 21 insertions(+), 20 deletions(-)
>
> diff --git a/lib/librte_vhost/rte_vhost.h b/lib/librte_vhost/rte_vhost.h
> index d33206997..b05162366 100644
> --- a/lib/librte_vhost/rte_vhost.h
> +++ b/lib/librte_vhost/rte_vhost.h
> @@ -29,6 +29,14 @@ extern "C" {
> #define RTE_VHOST_USER_DEQUEUE_ZERO_COPY (1ULL << 2)
> #define RTE_VHOST_USER_IOMMU_SUPPORT (1ULL << 3)
>
> +#define RTE_VHOST_USER_PROTOCOL_F_MQ 0
Instead of adding a "RTE_" prefix. I prefer to define it like this:
#ifndef VHOST_USER_PROTOCOL_F_MQ
#define VHOST_USER_PROTOCOL_F_MQ 0
#endif
Similar to other macros.
> +#define RTE_VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
> +#define RTE_VHOST_USER_PROTOCOL_F_RARP 2
> +#define RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK 3
> +#define RTE_VHOST_USER_PROTOCOL_F_NET_MTU 4
> +#define RTE_VHOST_USER_PROTOCOL_F_SLAVE_REQ 5
> +#define RTE_VHOST_USER_F_PROTOCOL_FEATURES 30
> +
> /**
> * Information relating to memory regions including offsets to
> * addresses in QEMUs memory file.
> diff --git a/lib/librte_vhost/vhost.h b/lib/librte_vhost/vhost.h
> index 58aec2e0d..a0b0520e2 100644
> --- a/lib/librte_vhost/vhost.h
> +++ b/lib/librte_vhost/vhost.h
> @@ -174,8 +174,6 @@ struct vhost_msg {
> #define VIRTIO_F_VERSION_1 32
> #endif
>
> -#define VHOST_USER_F_PROTOCOL_FEATURES 30
> -
> /* Features supported by this builtin vhost-user net driver. */
> #define VIRTIO_NET_SUPPORTED_FEATURES ((1ULL <<
> VIRTIO_NET_F_MRG_RXBUF) | \
> (1ULL << VIRTIO_F_ANY_LAYOUT) | \
> @@ -185,7 +183,7 @@ struct vhost_msg {
> (1ULL << VIRTIO_NET_F_MQ) | \
> (1ULL << VIRTIO_F_VERSION_1) | \
> (1ULL << VHOST_F_LOG_ALL) | \
> - (1ULL <<
> VHOST_USER_F_PROTOCOL_FEATURES) | \
> + (1ULL <<
> RTE_VHOST_USER_F_PROTOCOL_FEATURES) | \
> (1ULL << VIRTIO_NET_F_GSO) | \
> (1ULL << VIRTIO_NET_F_HOST_TSO4) | \
> (1ULL << VIRTIO_NET_F_HOST_TSO6) | \
> diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
> index 5c5361066..c93e48e4d 100644
> --- a/lib/librte_vhost/vhost_user.c
> +++ b/lib/librte_vhost/vhost_user.c
> @@ -527,7 +527,7 @@ vhost_user_set_vring_addr(struct virtio_net **pdev,
> VhostUserMsg *msg)
> vring_invalidate(dev, vq);
>
> if (vq->enabled && (dev->features &
> - (1ULL <<
> VHOST_USER_F_PROTOCOL_FEATURES))) {
> + (1ULL <<
> RTE_VHOST_USER_F_PROTOCOL_FEATURES))) {
> dev = translate_ring_addresses(dev, msg-
> >payload.addr.index);
> if (!dev)
> return -1;
> @@ -897,11 +897,11 @@ vhost_user_set_vring_kick(struct virtio_net
> **pdev, struct VhostUserMsg *pmsg)
> vq = dev->virtqueue[file.index];
>
> /*
> - * When VHOST_USER_F_PROTOCOL_FEATURES is not negotiated,
> + * When RTE_VHOST_USER_F_PROTOCOL_FEATURES is not
> negotiated,
> * the ring starts already enabled. Otherwise, it is enabled via
> * the SET_VRING_ENABLE message.
> */
> - if (!(dev->features & (1ULL <<
> VHOST_USER_F_PROTOCOL_FEATURES)))
> + if (!(dev->features & (1ULL <<
> RTE_VHOST_USER_F_PROTOCOL_FEATURES)))
> vq->enabled = 1;
>
> if (vq->kickfd >= 0)
> @@ -1012,7 +1012,8 @@ vhost_user_get_protocol_features(struct
> virtio_net *dev,
> * Qemu versions (from v2.7.0 to v2.9.0).
> */
> if (!(features & (1ULL << VIRTIO_F_IOMMU_PLATFORM)))
> - protocol_features &= ~(1ULL <<
> VHOST_USER_PROTOCOL_F_REPLY_ACK);
> + protocol_features &=
> + ~(1ULL <<
> RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK);
>
> msg->payload.u64 = protocol_features;
> msg->size = sizeof(msg->payload.u64);
> diff --git a/lib/librte_vhost/vhost_user.h b/lib/librte_vhost/vhost_user.h
> index 0fafbe6e0..066e772dd 100644
> --- a/lib/librte_vhost/vhost_user.h
> +++ b/lib/librte_vhost/vhost_user.h
> @@ -14,19 +14,13 @@
>
> #define VHOST_MEMORY_MAX_NREGIONS 8
>
> -#define VHOST_USER_PROTOCOL_F_MQ 0
> -#define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
> -#define VHOST_USER_PROTOCOL_F_RARP 2
> -#define VHOST_USER_PROTOCOL_F_REPLY_ACK 3
> -#define VHOST_USER_PROTOCOL_F_NET_MTU 4
> -#define VHOST_USER_PROTOCOL_F_SLAVE_REQ 5
> -
> -#define VHOST_USER_PROTOCOL_FEATURES ((1ULL <<
> VHOST_USER_PROTOCOL_F_MQ) | \
> - (1ULL <<
> VHOST_USER_PROTOCOL_F_LOG_SHMFD) |\
> - (1ULL <<
> VHOST_USER_PROTOCOL_F_RARP) | \
> - (1ULL <<
> VHOST_USER_PROTOCOL_F_REPLY_ACK) | \
> - (1ULL <<
> VHOST_USER_PROTOCOL_F_NET_MTU) | \
> - (1ULL <<
> VHOST_USER_PROTOCOL_F_SLAVE_REQ))
> +#define VHOST_USER_PROTOCOL_FEATURES \
> + ((1ULL << RTE_VHOST_USER_PROTOCOL_F_MQ) | \
> + (1ULL <<
> RTE_VHOST_USER_PROTOCOL_F_LOG_SHMFD) |\
> + (1ULL << RTE_VHOST_USER_PROTOCOL_F_RARP) | \
> + (1ULL <<
> RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK) | \
> + (1ULL <<
> RTE_VHOST_USER_PROTOCOL_F_NET_MTU) | \
> + (1ULL <<
> RTE_VHOST_USER_PROTOCOL_F_SLAVE_REQ))
>
> typedef enum VhostUserRequest {
> VHOST_USER_NONE = 0,
> --
> 2.13.6
On 03/06/2018 10:37 AM, Tan, Jianfeng wrote:
>
>
>> -----Original Message-----
>> From: Wang, Zhihong
>> Sent: Tuesday, February 13, 2018 5:21 PM
>> To: dev@dpdk.org
>> Cc: Tan, Jianfeng; Bie, Tiwei; maxime.coquelin@redhat.com;
>> yliu@fridaylinux.org; Liang, Cunming; Wang, Xiao W; Daly, Dan; Wang,
>> Zhihong
>> Subject: [PATCH v2 1/6] vhost: export vhost feature definitions
>>
>> This patch exports vhost-user protocol features to support device driver
>> development.
>>
>> Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
>> ---
>> lib/librte_vhost/rte_vhost.h | 8 ++++++++
>> lib/librte_vhost/vhost.h | 4 +---
>> lib/librte_vhost/vhost_user.c | 9 +++++----
>> lib/librte_vhost/vhost_user.h | 20 +++++++-------------
>> 4 files changed, 21 insertions(+), 20 deletions(-)
>>
>> diff --git a/lib/librte_vhost/rte_vhost.h b/lib/librte_vhost/rte_vhost.h
>> index d33206997..b05162366 100644
>> --- a/lib/librte_vhost/rte_vhost.h
>> +++ b/lib/librte_vhost/rte_vhost.h
>> @@ -29,6 +29,14 @@ extern "C" {
>> #define RTE_VHOST_USER_DEQUEUE_ZERO_COPY (1ULL << 2)
>> #define RTE_VHOST_USER_IOMMU_SUPPORT (1ULL << 3)
>>
>> +#define RTE_VHOST_USER_PROTOCOL_F_MQ 0
>
> Instead of adding a "RTE_" prefix. I prefer to define it like this:
> #ifndef VHOST_USER_PROTOCOL_F_MQ
> #define VHOST_USER_PROTOCOL_F_MQ 0
> #endif
>
> Similar to other macros.
I agree, it is better to keep same naming as in the spec IMHO.
>> +#define RTE_VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
>> +#define RTE_VHOST_USER_PROTOCOL_F_RARP 2
>> +#define RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK 3
>> +#define RTE_VHOST_USER_PROTOCOL_F_NET_MTU 4
>> +#define RTE_VHOST_USER_PROTOCOL_F_SLAVE_REQ 5
>> +#define RTE_VHOST_USER_F_PROTOCOL_FEATURES 30
Please put the above declaration separately, it could be misleading,
making to think it is a vhost-user protocol feature whereas it is a
Virtio feature.
>> +
>> /**
>> * Information relating to memory regions including offsets to
>> * addresses in QEMUs memory file.
>> diff --git a/lib/librte_vhost/vhost.h b/lib/librte_vhost/vhost.h
>> index 58aec2e0d..a0b0520e2 100644
>> --- a/lib/librte_vhost/vhost.h
>> +++ b/lib/librte_vhost/vhost.h
>> @@ -174,8 +174,6 @@ struct vhost_msg {
>> #define VIRTIO_F_VERSION_1 32
>> #endif
>>
>> -#define VHOST_USER_F_PROTOCOL_FEATURES 30
>> -
>> /* Features supported by this builtin vhost-user net driver. */
>> #define VIRTIO_NET_SUPPORTED_FEATURES ((1ULL <<
>> VIRTIO_NET_F_MRG_RXBUF) | \
>> (1ULL << VIRTIO_F_ANY_LAYOUT) | \
>> @@ -185,7 +183,7 @@ struct vhost_msg {
>> (1ULL << VIRTIO_NET_F_MQ) | \
>> (1ULL << VIRTIO_F_VERSION_1) | \
>> (1ULL << VHOST_F_LOG_ALL) | \
>> - (1ULL <<
>> VHOST_USER_F_PROTOCOL_FEATURES) | \
>> + (1ULL <<
>> RTE_VHOST_USER_F_PROTOCOL_FEATURES) | \
>> (1ULL << VIRTIO_NET_F_GSO) | \
>> (1ULL << VIRTIO_NET_F_HOST_TSO4) | \
>> (1ULL << VIRTIO_NET_F_HOST_TSO6) | \
>> diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
>> index 5c5361066..c93e48e4d 100644
>> --- a/lib/librte_vhost/vhost_user.c
>> +++ b/lib/librte_vhost/vhost_user.c
>> @@ -527,7 +527,7 @@ vhost_user_set_vring_addr(struct virtio_net **pdev,
>> VhostUserMsg *msg)
>> vring_invalidate(dev, vq);
>>
>> if (vq->enabled && (dev->features &
>> - (1ULL <<
>> VHOST_USER_F_PROTOCOL_FEATURES))) {
>> + (1ULL <<
>> RTE_VHOST_USER_F_PROTOCOL_FEATURES))) {
>> dev = translate_ring_addresses(dev, msg-
>>> payload.addr.index);
>> if (!dev)
>> return -1;
>> @@ -897,11 +897,11 @@ vhost_user_set_vring_kick(struct virtio_net
>> **pdev, struct VhostUserMsg *pmsg)
>> vq = dev->virtqueue[file.index];
>>
>> /*
>> - * When VHOST_USER_F_PROTOCOL_FEATURES is not negotiated,
>> + * When RTE_VHOST_USER_F_PROTOCOL_FEATURES is not
>> negotiated,
>> * the ring starts already enabled. Otherwise, it is enabled via
>> * the SET_VRING_ENABLE message.
>> */
>> - if (!(dev->features & (1ULL <<
>> VHOST_USER_F_PROTOCOL_FEATURES)))
>> + if (!(dev->features & (1ULL <<
>> RTE_VHOST_USER_F_PROTOCOL_FEATURES)))
>> vq->enabled = 1;
>>
>> if (vq->kickfd >= 0)
>> @@ -1012,7 +1012,8 @@ vhost_user_get_protocol_features(struct
>> virtio_net *dev,
>> * Qemu versions (from v2.7.0 to v2.9.0).
>> */
>> if (!(features & (1ULL << VIRTIO_F_IOMMU_PLATFORM)))
>> - protocol_features &= ~(1ULL <<
>> VHOST_USER_PROTOCOL_F_REPLY_ACK);
>> + protocol_features &=
>> + ~(1ULL <<
>> RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK);
>>
>> msg->payload.u64 = protocol_features;
>> msg->size = sizeof(msg->payload.u64);
>> diff --git a/lib/librte_vhost/vhost_user.h b/lib/librte_vhost/vhost_user.h
>> index 0fafbe6e0..066e772dd 100644
>> --- a/lib/librte_vhost/vhost_user.h
>> +++ b/lib/librte_vhost/vhost_user.h
>> @@ -14,19 +14,13 @@
>>
>> #define VHOST_MEMORY_MAX_NREGIONS 8
>>
>> -#define VHOST_USER_PROTOCOL_F_MQ 0
>> -#define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
>> -#define VHOST_USER_PROTOCOL_F_RARP 2
>> -#define VHOST_USER_PROTOCOL_F_REPLY_ACK 3
>> -#define VHOST_USER_PROTOCOL_F_NET_MTU 4
>> -#define VHOST_USER_PROTOCOL_F_SLAVE_REQ 5
>> -
>> -#define VHOST_USER_PROTOCOL_FEATURES ((1ULL <<
>> VHOST_USER_PROTOCOL_F_MQ) | \
>> - (1ULL <<
>> VHOST_USER_PROTOCOL_F_LOG_SHMFD) |\
>> - (1ULL <<
>> VHOST_USER_PROTOCOL_F_RARP) | \
>> - (1ULL <<
>> VHOST_USER_PROTOCOL_F_REPLY_ACK) | \
>> - (1ULL <<
>> VHOST_USER_PROTOCOL_F_NET_MTU) | \
>> - (1ULL <<
>> VHOST_USER_PROTOCOL_F_SLAVE_REQ))
>> +#define VHOST_USER_PROTOCOL_FEATURES \
>> + ((1ULL << RTE_VHOST_USER_PROTOCOL_F_MQ) | \
>> + (1ULL <<
>> RTE_VHOST_USER_PROTOCOL_F_LOG_SHMFD) |\
>> + (1ULL << RTE_VHOST_USER_PROTOCOL_F_RARP) | \
>> + (1ULL <<
>> RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK) | \
>> + (1ULL <<
>> RTE_VHOST_USER_PROTOCOL_F_NET_MTU) | \
>> + (1ULL <<
>> RTE_VHOST_USER_PROTOCOL_F_SLAVE_REQ))
>>
>> typedef enum VhostUserRequest {
>> VHOST_USER_NONE = 0,
>> --
>> 2.13.6
>
> -----Original Message-----
> From: Maxime Coquelin [mailto:maxime.coquelin@redhat.com]
> Sent: Tuesday, March 6, 2018 10:03 PM
> To: Tan, Jianfeng <jianfeng.tan@intel.com>; Wang, Zhihong
> <zhihong.wang@intel.com>; dev@dpdk.org
> Cc: Bie, Tiwei <tiwei.bie@intel.com>; yliu@fridaylinux.org; Liang, Cunming
> <cunming.liang@intel.com>; Wang, Xiao W <xiao.w.wang@intel.com>; Daly,
> Dan <dan.daly@intel.com>
> Subject: Re: [PATCH v2 1/6] vhost: export vhost feature definitions
>
>
>
> On 03/06/2018 10:37 AM, Tan, Jianfeng wrote:
> >
> >
> >> -----Original Message-----
> >> From: Wang, Zhihong
> >> Sent: Tuesday, February 13, 2018 5:21 PM
> >> To: dev@dpdk.org
> >> Cc: Tan, Jianfeng; Bie, Tiwei; maxime.coquelin@redhat.com;
> >> yliu@fridaylinux.org; Liang, Cunming; Wang, Xiao W; Daly, Dan; Wang,
> >> Zhihong
> >> Subject: [PATCH v2 1/6] vhost: export vhost feature definitions
> >>
> >> This patch exports vhost-user protocol features to support device driver
> >> development.
> >>
> >> Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
> >> ---
> >> lib/librte_vhost/rte_vhost.h | 8 ++++++++
> >> lib/librte_vhost/vhost.h | 4 +---
> >> lib/librte_vhost/vhost_user.c | 9 +++++----
> >> lib/librte_vhost/vhost_user.h | 20 +++++++-------------
> >> 4 files changed, 21 insertions(+), 20 deletions(-)
> >>
> >> diff --git a/lib/librte_vhost/rte_vhost.h b/lib/librte_vhost/rte_vhost.h
> >> index d33206997..b05162366 100644
> >> --- a/lib/librte_vhost/rte_vhost.h
> >> +++ b/lib/librte_vhost/rte_vhost.h
> >> @@ -29,6 +29,14 @@ extern "C" {
> >> #define RTE_VHOST_USER_DEQUEUE_ZERO_COPY (1ULL << 2)
> >> #define RTE_VHOST_USER_IOMMU_SUPPORT (1ULL << 3)
> >>
> >> +#define RTE_VHOST_USER_PROTOCOL_F_MQ 0
> >
> > Instead of adding a "RTE_" prefix. I prefer to define it like this:
> > #ifndef VHOST_USER_PROTOCOL_F_MQ
> > #define VHOST_USER_PROTOCOL_F_MQ 0
> > #endif
> >
> > Similar to other macros.
>
> I agree, it is better to keep same naming as in the spec IMHO.
Ok. Thanks Jianfeng and Maxime.
>
> >> +#define RTE_VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
> >> +#define RTE_VHOST_USER_PROTOCOL_F_RARP 2
> >> +#define RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK 3
> >> +#define RTE_VHOST_USER_PROTOCOL_F_NET_MTU 4
> >> +#define RTE_VHOST_USER_PROTOCOL_F_SLAVE_REQ 5
> >> +#define RTE_VHOST_USER_F_PROTOCOL_FEATURES 30
>
> Please put the above declaration separately, it could be misleading,
> making to think it is a vhost-user protocol feature whereas it is a
> Virtio feature.
Good point. Will change it.
-Zhihong
>
> >> +
> >> /**
> >> * Information relating to memory regions including offsets to
> >> * addresses in QEMUs memory file.
> >> diff --git a/lib/librte_vhost/vhost.h b/lib/librte_vhost/vhost.h
> >> index 58aec2e0d..a0b0520e2 100644
> >> --- a/lib/librte_vhost/vhost.h
> >> +++ b/lib/librte_vhost/vhost.h
> >> @@ -174,8 +174,6 @@ struct vhost_msg {
> >> #define VIRTIO_F_VERSION_1 32
> >> #endif
> >>
> >> -#define VHOST_USER_F_PROTOCOL_FEATURES 30
> >> -
> >> /* Features supported by this builtin vhost-user net driver. */
> >> #define VIRTIO_NET_SUPPORTED_FEATURES ((1ULL <<
> >> VIRTIO_NET_F_MRG_RXBUF) | \
> >> (1ULL << VIRTIO_F_ANY_LAYOUT) | \
> >> @@ -185,7 +183,7 @@ struct vhost_msg {
> >> (1ULL << VIRTIO_NET_F_MQ) | \
> >> (1ULL << VIRTIO_F_VERSION_1) | \
> >> (1ULL << VHOST_F_LOG_ALL) | \
> >> - (1ULL <<
> >> VHOST_USER_F_PROTOCOL_FEATURES) | \
> >> + (1ULL <<
> >> RTE_VHOST_USER_F_PROTOCOL_FEATURES) | \
> >> (1ULL << VIRTIO_NET_F_GSO) | \
> >> (1ULL << VIRTIO_NET_F_HOST_TSO4) | \
> >> (1ULL << VIRTIO_NET_F_HOST_TSO6) | \
> >> diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
> >> index 5c5361066..c93e48e4d 100644
> >> --- a/lib/librte_vhost/vhost_user.c
> >> +++ b/lib/librte_vhost/vhost_user.c
> >> @@ -527,7 +527,7 @@ vhost_user_set_vring_addr(struct virtio_net
> **pdev,
> >> VhostUserMsg *msg)
> >> vring_invalidate(dev, vq);
> >>
> >> if (vq->enabled && (dev->features &
> >> - (1ULL <<
> >> VHOST_USER_F_PROTOCOL_FEATURES))) {
> >> + (1ULL <<
> >> RTE_VHOST_USER_F_PROTOCOL_FEATURES))) {
> >> dev = translate_ring_addresses(dev, msg-
> >>> payload.addr.index);
> >> if (!dev)
> >> return -1;
> >> @@ -897,11 +897,11 @@ vhost_user_set_vring_kick(struct virtio_net
> >> **pdev, struct VhostUserMsg *pmsg)
> >> vq = dev->virtqueue[file.index];
> >>
> >> /*
> >> - * When VHOST_USER_F_PROTOCOL_FEATURES is not negotiated,
> >> + * When RTE_VHOST_USER_F_PROTOCOL_FEATURES is not
> >> negotiated,
> >> * the ring starts already enabled. Otherwise, it is enabled via
> >> * the SET_VRING_ENABLE message.
> >> */
> >> - if (!(dev->features & (1ULL <<
> >> VHOST_USER_F_PROTOCOL_FEATURES)))
> >> + if (!(dev->features & (1ULL <<
> >> RTE_VHOST_USER_F_PROTOCOL_FEATURES)))
> >> vq->enabled = 1;
> >>
> >> if (vq->kickfd >= 0)
> >> @@ -1012,7 +1012,8 @@ vhost_user_get_protocol_features(struct
> >> virtio_net *dev,
> >> * Qemu versions (from v2.7.0 to v2.9.0).
> >> */
> >> if (!(features & (1ULL << VIRTIO_F_IOMMU_PLATFORM)))
> >> - protocol_features &= ~(1ULL <<
> >> VHOST_USER_PROTOCOL_F_REPLY_ACK);
> >> + protocol_features &=
> >> + ~(1ULL <<
> >> RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK);
> >>
> >> msg->payload.u64 = protocol_features;
> >> msg->size = sizeof(msg->payload.u64);
> >> diff --git a/lib/librte_vhost/vhost_user.h b/lib/librte_vhost/vhost_user.h
> >> index 0fafbe6e0..066e772dd 100644
> >> --- a/lib/librte_vhost/vhost_user.h
> >> +++ b/lib/librte_vhost/vhost_user.h
> >> @@ -14,19 +14,13 @@
> >>
> >> #define VHOST_MEMORY_MAX_NREGIONS 8
> >>
> >> -#define VHOST_USER_PROTOCOL_F_MQ 0
> >> -#define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
> >> -#define VHOST_USER_PROTOCOL_F_RARP 2
> >> -#define VHOST_USER_PROTOCOL_F_REPLY_ACK 3
> >> -#define VHOST_USER_PROTOCOL_F_NET_MTU 4
> >> -#define VHOST_USER_PROTOCOL_F_SLAVE_REQ 5
> >> -
> >> -#define VHOST_USER_PROTOCOL_FEATURES ((1ULL <<
> >> VHOST_USER_PROTOCOL_F_MQ) | \
> >> - (1ULL <<
> >> VHOST_USER_PROTOCOL_F_LOG_SHMFD) |\
> >> - (1ULL <<
> >> VHOST_USER_PROTOCOL_F_RARP) | \
> >> - (1ULL <<
> >> VHOST_USER_PROTOCOL_F_REPLY_ACK) | \
> >> - (1ULL <<
> >> VHOST_USER_PROTOCOL_F_NET_MTU) | \
> >> - (1ULL <<
> >> VHOST_USER_PROTOCOL_F_SLAVE_REQ))
> >> +#define VHOST_USER_PROTOCOL_FEATURES \
> >> + ((1ULL << RTE_VHOST_USER_PROTOCOL_F_MQ) | \
> >> + (1ULL <<
> >> RTE_VHOST_USER_PROTOCOL_F_LOG_SHMFD) |\
> >> + (1ULL << RTE_VHOST_USER_PROTOCOL_F_RARP) | \
> >> + (1ULL <<
> >> RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK) | \
> >> + (1ULL <<
> >> RTE_VHOST_USER_PROTOCOL_F_NET_MTU) | \
> >> + (1ULL <<
> >> RTE_VHOST_USER_PROTOCOL_F_SLAVE_REQ))
> >>
> >> typedef enum VhostUserRequest {
> >> VHOST_USER_NONE = 0,
> >> --
> >> 2.13.6
> >
@@ -29,6 +29,14 @@ extern "C" {
#define RTE_VHOST_USER_DEQUEUE_ZERO_COPY (1ULL << 2)
#define RTE_VHOST_USER_IOMMU_SUPPORT (1ULL << 3)
+#define RTE_VHOST_USER_PROTOCOL_F_MQ 0
+#define RTE_VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
+#define RTE_VHOST_USER_PROTOCOL_F_RARP 2
+#define RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK 3
+#define RTE_VHOST_USER_PROTOCOL_F_NET_MTU 4
+#define RTE_VHOST_USER_PROTOCOL_F_SLAVE_REQ 5
+#define RTE_VHOST_USER_F_PROTOCOL_FEATURES 30
+
/**
* Information relating to memory regions including offsets to
* addresses in QEMUs memory file.
@@ -174,8 +174,6 @@ struct vhost_msg {
#define VIRTIO_F_VERSION_1 32
#endif
-#define VHOST_USER_F_PROTOCOL_FEATURES 30
-
/* Features supported by this builtin vhost-user net driver. */
#define VIRTIO_NET_SUPPORTED_FEATURES ((1ULL << VIRTIO_NET_F_MRG_RXBUF) | \
(1ULL << VIRTIO_F_ANY_LAYOUT) | \
@@ -185,7 +183,7 @@ struct vhost_msg {
(1ULL << VIRTIO_NET_F_MQ) | \
(1ULL << VIRTIO_F_VERSION_1) | \
(1ULL << VHOST_F_LOG_ALL) | \
- (1ULL << VHOST_USER_F_PROTOCOL_FEATURES) | \
+ (1ULL << RTE_VHOST_USER_F_PROTOCOL_FEATURES) | \
(1ULL << VIRTIO_NET_F_GSO) | \
(1ULL << VIRTIO_NET_F_HOST_TSO4) | \
(1ULL << VIRTIO_NET_F_HOST_TSO6) | \
@@ -527,7 +527,7 @@ vhost_user_set_vring_addr(struct virtio_net **pdev, VhostUserMsg *msg)
vring_invalidate(dev, vq);
if (vq->enabled && (dev->features &
- (1ULL << VHOST_USER_F_PROTOCOL_FEATURES))) {
+ (1ULL << RTE_VHOST_USER_F_PROTOCOL_FEATURES))) {
dev = translate_ring_addresses(dev, msg->payload.addr.index);
if (!dev)
return -1;
@@ -897,11 +897,11 @@ vhost_user_set_vring_kick(struct virtio_net **pdev, struct VhostUserMsg *pmsg)
vq = dev->virtqueue[file.index];
/*
- * When VHOST_USER_F_PROTOCOL_FEATURES is not negotiated,
+ * When RTE_VHOST_USER_F_PROTOCOL_FEATURES is not negotiated,
* the ring starts already enabled. Otherwise, it is enabled via
* the SET_VRING_ENABLE message.
*/
- if (!(dev->features & (1ULL << VHOST_USER_F_PROTOCOL_FEATURES)))
+ if (!(dev->features & (1ULL << RTE_VHOST_USER_F_PROTOCOL_FEATURES)))
vq->enabled = 1;
if (vq->kickfd >= 0)
@@ -1012,7 +1012,8 @@ vhost_user_get_protocol_features(struct virtio_net *dev,
* Qemu versions (from v2.7.0 to v2.9.0).
*/
if (!(features & (1ULL << VIRTIO_F_IOMMU_PLATFORM)))
- protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_REPLY_ACK);
+ protocol_features &=
+ ~(1ULL << RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK);
msg->payload.u64 = protocol_features;
msg->size = sizeof(msg->payload.u64);
@@ -14,19 +14,13 @@
#define VHOST_MEMORY_MAX_NREGIONS 8
-#define VHOST_USER_PROTOCOL_F_MQ 0
-#define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1
-#define VHOST_USER_PROTOCOL_F_RARP 2
-#define VHOST_USER_PROTOCOL_F_REPLY_ACK 3
-#define VHOST_USER_PROTOCOL_F_NET_MTU 4
-#define VHOST_USER_PROTOCOL_F_SLAVE_REQ 5
-
-#define VHOST_USER_PROTOCOL_FEATURES ((1ULL << VHOST_USER_PROTOCOL_F_MQ) | \
- (1ULL << VHOST_USER_PROTOCOL_F_LOG_SHMFD) |\
- (1ULL << VHOST_USER_PROTOCOL_F_RARP) | \
- (1ULL << VHOST_USER_PROTOCOL_F_REPLY_ACK) | \
- (1ULL << VHOST_USER_PROTOCOL_F_NET_MTU) | \
- (1ULL << VHOST_USER_PROTOCOL_F_SLAVE_REQ))
+#define VHOST_USER_PROTOCOL_FEATURES \
+ ((1ULL << RTE_VHOST_USER_PROTOCOL_F_MQ) | \
+ (1ULL << RTE_VHOST_USER_PROTOCOL_F_LOG_SHMFD) |\
+ (1ULL << RTE_VHOST_USER_PROTOCOL_F_RARP) | \
+ (1ULL << RTE_VHOST_USER_PROTOCOL_F_REPLY_ACK) | \
+ (1ULL << RTE_VHOST_USER_PROTOCOL_F_NET_MTU) | \
+ (1ULL << RTE_VHOST_USER_PROTOCOL_F_SLAVE_REQ))
typedef enum VhostUserRequest {
VHOST_USER_NONE = 0,