[dpdk-dev,dpdk-dev,v1,3/5] test: add event crypto adapter auto-test

diff --git a/test/test/Makefile b/test/test/Makefile
index a88cc38..e449daa 100644
--- a/test/test/Makefile
+++ b/test/test/Makefile
@@ -185,6 +185,7 @@  ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
 SRCS-y += test_eventdev.c
 SRCS-y += test_event_ring.c
 SRCS-y += test_event_eth_rx_adapter.c
+SRCS-y += test_event_crypto_adapter.c
 endif
 
 ifeq ($(CONFIG_RTE_LIBRTE_RAWDEV),y)
diff --git a/test/test/test_event_crypto_adapter.c b/test/test/test_event_crypto_adapter.c
new file mode 100644
index 0000000..a38e3cf
--- /dev/null
+++ b/test/test/test_event_crypto_adapter.c
@@ -0,0 +1,866 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#include <string.h>
+#include <rte_common.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_cryptodev.h>
+#include <rte_eventdev.h>
+#include <rte_bus_vdev.h>
+#include <rte_event_crypto_adapter.h>
+#include "test.h"
+
+#define PKT_TRACE                  0
+#define DEFAULT_NUM_XFORMS        (2)
+#define NUM_MBUFS                 (8191)
+#define MBUF_CACHE_SIZE           (256)
+#define MAXIMUM_IV_LENGTH         (16)
+#define DEFAULT_NUM_OPS_INFLIGHT  (128)
+#define TEST_PORT_ID               0
+#define ADAPTER_PORT_ID            1
+#define TEST_EV_APP_QUEUE_ID       0
+#define TEST_EV_CRYPTO_QUEUE_ID    1
+#define TEST_ADAPTER_ID            0
+#define TEST_CDEV_ID               0
+#define PACKET_LENGTH              64
+#define NB_TEST_PORTS              1
+#define NB_TEST_QUEUES             2
+#define MBUF_SIZE              (sizeof(struct rte_mbuf) + \
+				RTE_PKTMBUF_HEADROOM + PACKET_LENGTH)
+#define IV_OFFSET              (sizeof(struct rte_crypto_op) + \
+				sizeof(struct rte_crypto_sym_op) + \
+				DEFAULT_NUM_XFORMS * \
+				sizeof(struct rte_crypto_sym_xform))
+
+#define CRYPTODEV_NAME_NULL_PMD    crypto_null
+
+static const uint8_t text_64B[] = {
+	0x05, 0x15, 0x77, 0x32, 0xc9, 0x66, 0x91, 0x50,
+	0x93, 0x9f, 0xbb, 0x4e, 0x2e, 0x5a, 0x02, 0xd0,
+	0x2d, 0x9d, 0x31, 0x5d, 0xc8, 0x9e, 0x86, 0x36,
+	0x54, 0x5c, 0x50, 0xe8, 0x75, 0x54, 0x74, 0x5e,
+	0xd5, 0xa2, 0x84, 0x21, 0x2d, 0xc5, 0xf8, 0x1c,
+	0x55, 0x1a, 0xba, 0x91, 0xce, 0xb5, 0xa3, 0x1e,
+	0x31, 0xbf, 0xe9, 0xa1, 0x97, 0x5c, 0x2b, 0xd6,
+	0x57, 0xa5, 0x9f, 0xab, 0xbd, 0xb0, 0x9b, 0x9c
+};
+
+struct event_crypto_adapter_test_params {
+	uint8_t cdev_id;
+	struct rte_mempool *mbuf_pool;
+	struct rte_mempool *op_mpool;
+	struct rte_mempool *session_mpool;
+	struct rte_cryptodev_config *config;
+	uint8_t crypto_event_port_id;
+};
+
+static struct event_crypto_adapter_test_params t_params;
+static uint8_t crypto_adapter_setup_done;
+static uint32_t slcore_id;
+static int evdev;
+
+
+static struct rte_mbuf *
+alloc_fill_mbuf(struct rte_mempool *mpool, const uint8_t *data,
+		size_t len, uint8_t blocksize)
+{
+	struct rte_mbuf *m = rte_pktmbuf_alloc(mpool);
+	size_t t_len = len - (blocksize ? (len % blocksize) : 0);
+
+	if (m) {
+		char *dst = rte_pktmbuf_append(m, t_len);
+
+		if (!dst) {
+			rte_pktmbuf_free(m);
+			return NULL;
+		}
+
+		rte_memcpy(dst, (const void *)data, t_len);
+	}
+	return m;
+}
+
+static int
+send_recv_ev(struct rte_event *ev)
+{
+	struct rte_crypto_op *op;
+	struct rte_event recv_ev;
+	int ret;
+
+
+	ret = rte_event_enqueue_burst(evdev, TEST_PORT_ID, ev, 1);
+	TEST_ASSERT_EQUAL(ret, 1, "Failed to send event to crypto adapter\n");
+
+	while (rte_event_dequeue_burst(evdev,
+			TEST_PORT_ID, &recv_ev, 1, 0) == 0)
+		rte_pause();
+
+	op = recv_ev.event_ptr;
+#if PKT_TRACE
+	struct rte_mbuf *m = op->sym->m_src;
+	rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m));
+#endif
+	rte_pktmbuf_free(op->sym->m_src);
+	rte_crypto_op_free(op);
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_crypto_adapter_stats(void)
+{
+	struct rte_event_crypto_adapter_stats stats;
+
+	rte_event_crypto_adapter_stats_get(TEST_ADAPTER_ID, &stats);
+	printf(" +------------------------------------------------------+\n");
+	printf(" + Crypto adapter stats for instance %u:\n", TEST_ADAPTER_ID);
+	printf(" + Event port poll count          %lu\n",
+		stats.event_poll_count);
+	printf(" + Event dequeue count            %lu\n",
+		stats.event_dequeue_count);
+	printf(" + Cryptodev enqueue count        %lu\n",
+		stats.crypto_enq_count);
+	printf(" + Cryptodev enqueue failed count %lu\n",
+		stats.crypto_enq_fail);
+	printf(" + Cryptodev dequeue count        %lu\n",
+		stats.crypto_deq_count);
+	printf(" + Event enqueue count            %lu\n",
+		stats.event_enqueue_count);
+	printf(" + Event enqueue retry count      %lu\n",
+		stats.event_enq_retry_count);
+	printf(" + Event enqueue fail count       %lu\n",
+		stats.event_enq_fail_count);
+	printf(" +------------------------------------------------------+\n");
+
+	rte_event_crypto_adapter_stats_reset(TEST_ADAPTER_ID);
+	return TEST_SUCCESS;
+}
+
+static int
+test_enq_deq_mode(uint8_t session_less)
+{
+	struct rte_crypto_sym_xform cipher_xform;
+	struct rte_cryptodev_sym_session *sess;
+	union rte_event_crypto_metadata m_data;
+	struct rte_crypto_sym_op *sym_op;
+	struct rte_crypto_op *op;
+	struct rte_mbuf *m;
+	struct rte_event ev;
+	int ret;
+	struct event_crypto_adapter_test_params *params = &t_params;
+
+	memset(&ev, 0, sizeof(ev));
+	memset(&m_data, 0, sizeof(m_data));
+	ev.queue_id = TEST_EV_CRYPTO_QUEUE_ID;
+	ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
+	ev.flow_id = 0xFFFF;
+
+	m = alloc_fill_mbuf(params->mbuf_pool, text_64B, PACKET_LENGTH, 0);
+	TEST_ASSERT_NOT_NULL(m, "Failed to allocate mbuf!\n");
+#if PKT_TRACE
+	rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m));
+#endif
+	/* Setup Cipher Parameters */
+	cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+	cipher_xform.next = NULL;
+
+	cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
+	cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+
+	sess = rte_cryptodev_sym_session_create(params->session_mpool);
+	TEST_ASSERT_NOT_NULL(sess, "Session creation failed\n");
+
+	if (sess && !session_less) {
+		/* Copy/update required event information */
+		rte_memcpy(&m_data.response_info, &ev, sizeof(m_data));
+		m_data.request_info.cdev_id = params->cdev_id;
+		m_data.request_info.queue_pair_id = 0;
+		m_data.response_info.queue_id = TEST_EV_APP_QUEUE_ID;
+		rte_cryptodev_sym_session_set_private_data(sess, &m_data,
+							sizeof(m_data));
+	}
+
+	/* Create Crypto session*/
+	rte_cryptodev_sym_session_init(params->cdev_id, sess, &cipher_xform,
+					params->session_mpool);
+	op = rte_crypto_op_alloc(params->op_mpool,
+			RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+	TEST_ASSERT_NOT_NULL(op,
+		"Failed to allocate symmetric crypto operation struct\n");
+
+	sym_op = op->sym;
+	if (session_less) {
+		struct rte_crypto_sym_xform *first_xform;
+
+		rte_crypto_op_sym_xforms_alloc(op, 1);
+		op->sess_type = RTE_CRYPTO_OP_SESSIONLESS;
+		first_xform = &cipher_xform;
+		sym_op->xform = first_xform;
+		uint32_t len = IV_OFFSET + MAXIMUM_IV_LENGTH +
+				(sizeof(struct rte_crypto_sym_xform) * 2);
+		op->private_data_offset = len;
+		/* Copy/update required event information */
+		rte_memcpy(&m_data.response_info, &ev, sizeof(m_data));
+		m_data.request_info.cdev_id = params->cdev_id;
+		m_data.request_info.queue_pair_id = 0;
+		m_data.response_info.queue_id = TEST_EV_APP_QUEUE_ID;
+		rte_memcpy((uint8_t *)op + len, &m_data, sizeof(m_data));
+	} else
+		rte_crypto_op_attach_sym_session(op, sess);
+
+	sym_op->m_src = m;
+	sym_op->cipher.data.offset = 0;
+	sym_op->cipher.data.length = PACKET_LENGTH;
+
+	/* Update event ptr with rte_crypo_op */
+	ev.event_ptr = op;
+
+	ret = send_recv_ev(&ev);
+	TEST_ASSERT_SUCCESS(ret, "Failed to send/receive event to "
+				"crypto adapter\n");
+
+	test_crypto_adapter_stats();
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_run_adapter_as_service(void)
+{
+	uint32_t adapter_service_id;
+
+	TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_service_id_get(
+			    TEST_ADAPTER_ID, &adapter_service_id),
+			    "Failed to get event crypto adapter service id");
+
+	TEST_ASSERT_SUCCESS(rte_service_map_lcore_set(adapter_service_id,
+			slcore_id, 1), "Failed to map adapter service");
+
+	TEST_ASSERT_SUCCESS(rte_service_runstate_set(adapter_service_id, 1),
+			"Failed to start event crypto adapter service");
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_sessionless_with_enq_deq_mode(void)
+{
+	enum rte_event_crypto_adapter_mode mode;
+	int ret;
+
+	test_run_adapter_as_service();
+	/* start the event crypto adapter */
+	mode = RTE_EVENT_CRYPTO_ADAPTER_ENQ_DEQ;
+	TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID,
+				mode), "Failed to start event crypto adapter");
+
+	ret = test_enq_deq_mode(1);
+	TEST_ASSERT_SUCCESS(ret, "Sessionless - ENQ-DEQ mode test "
+				"failed!\n");
+	return TEST_SUCCESS;
+}
+
+static int
+test_session_with_enq_deq_mode(void)
+{
+	enum rte_event_crypto_adapter_mode mode;
+	int ret;
+
+	test_run_adapter_as_service();
+	mode = RTE_EVENT_CRYPTO_ADAPTER_ENQ_DEQ;
+	TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID,
+				mode), "Failed to start event crypto adapter");
+
+	ret = test_enq_deq_mode(0);
+	TEST_ASSERT_SUCCESS(ret, "Session based - ENQ-DEQ mode test "
+				"failed!\n");
+	return TEST_SUCCESS;
+}
+
+static int
+send_op_recv_ev(struct rte_crypto_op *op)
+{
+	struct event_crypto_adapter_test_params *params = &t_params;
+	struct rte_crypto_op *recv_op;
+	struct rte_event ev;
+	int ret;
+
+	ret = rte_cryptodev_enqueue_burst(params->cdev_id, 0, &op, 1);
+	TEST_ASSERT_EQUAL(ret, 1, "Failed to send event to crypto adapter\n");
+	memset(&ev, 0, sizeof(ev));
+
+	while (rte_event_dequeue_burst(evdev, TEST_PORT_ID, &ev, 1, 0) == 0)
+		rte_pause();
+
+	recv_op = ev.event_ptr;
+#if PKT_TRACE
+	struct rte_mbuf *m = recv_op->sym->m_src;
+	rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m));
+#endif
+	rte_pktmbuf_free(recv_op->sym->m_src);
+	rte_crypto_op_free(recv_op);
+
+	return TEST_SUCCESS;
+
+}
+
+static int
+test_deq_only_mode(uint8_t session_less)
+{
+	struct rte_crypto_sym_xform cipher_xform;
+	struct rte_cryptodev_sym_session *sess;
+	union rte_event_crypto_metadata m_data;
+	struct rte_crypto_sym_op *sym_op;
+	struct rte_event ev;
+	struct rte_crypto_op *op;
+	struct rte_mbuf *m;
+	int ret;
+	struct event_crypto_adapter_test_params *params = &t_params;
+
+	memset(&ev, 0, sizeof(ev));
+	memset(&m_data, 0, sizeof(m_data));
+	ev.sched_type = RTE_SCHED_TYPE_ATOMIC;
+	ev.flow_id = 0xFFFF;
+
+	m = alloc_fill_mbuf(params->mbuf_pool, text_64B, PACKET_LENGTH, 0);
+	TEST_ASSERT_NOT_NULL(m, "Failed to allocate mbuf!\n");
+#if PKT_TRACE
+	rte_pktmbuf_dump(stdout, m, rte_pktmbuf_pkt_len(m));
+#endif
+	/* Setup Cipher Parameters */
+	cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+	cipher_xform.next = NULL;
+
+	cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_NULL;
+	cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+
+	sess = rte_cryptodev_sym_session_create(params->session_mpool);
+	TEST_ASSERT_NOT_NULL(sess, "Session creation failed\n");
+	if (sess && !session_less) {
+		/* Copy/update required event information */
+		rte_memcpy(&m_data.response_info, &ev, sizeof(m_data));
+		m_data.response_info.queue_id = TEST_EV_APP_QUEUE_ID;
+		rte_cryptodev_sym_session_set_private_data(sess, &m_data,
+							sizeof(m_data));
+	}
+
+	/* Create Crypto session*/
+	rte_cryptodev_sym_session_init(params->cdev_id, sess, &cipher_xform,
+					params->session_mpool);
+
+	op = rte_crypto_op_alloc(params->op_mpool,
+			RTE_CRYPTO_OP_TYPE_SYMMETRIC);
+	TEST_ASSERT_NOT_NULL(op,
+		"Failed to allocate symmetric crypto operation struct\n");
+
+	sym_op = op->sym;
+	if (session_less) {
+		struct rte_crypto_sym_xform *first_xform;
+
+		rte_crypto_op_sym_xforms_alloc(op, 1);
+		op->sess_type = RTE_CRYPTO_OP_SESSIONLESS;
+		first_xform = &cipher_xform;
+		sym_op->xform = first_xform;
+		uint32_t len = IV_OFFSET + MAXIMUM_IV_LENGTH +
+				(sizeof(struct rte_crypto_sym_xform) * 2);
+		op->private_data_offset = len;
+		/* Copy/update required event information */
+		rte_memcpy(&m_data.response_info, &ev, sizeof(m_data));
+		m_data.response_info.queue_id = TEST_EV_APP_QUEUE_ID;
+		rte_memcpy((uint8_t *)op + len, &m_data, sizeof(m_data));
+
+	} else
+		rte_crypto_op_attach_sym_session(op, sess);
+
+	sym_op->m_src = m;
+	sym_op->cipher.data.offset = 0;
+	sym_op->cipher.data.length = PACKET_LENGTH;
+
+	ret = send_op_recv_ev(op);
+	TEST_ASSERT_SUCCESS(ret, "Failed to enqueue op to cryptodev\n");
+
+	test_crypto_adapter_stats();
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_sessionless_with_deq_only_mode(void)
+{
+	enum rte_event_crypto_adapter_mode mode;
+	uint32_t cap;
+	int ret;
+
+	ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap);
+	TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n");
+
+	if (!(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT))
+		test_run_adapter_as_service();
+
+	/* start the event crypto adapter */
+	mode = RTE_EVENT_CRYPTO_ADAPTER_DEQ_ONLY;
+	TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID,
+				mode), "Failed to start event crypto adapter");
+
+	ret = test_deq_only_mode(1);
+	TEST_ASSERT_SUCCESS(ret, "Sessionless - DEQ only mode test "
+				"failed!\n");
+	return TEST_SUCCESS;
+}
+
+static int
+test_session_with_deq_only_mode(void)
+{
+	enum rte_event_crypto_adapter_mode mode;
+	uint32_t cap;
+	int ret;
+
+	ret = rte_event_crypto_adapter_caps_get(TEST_ADAPTER_ID, evdev, &cap);
+	TEST_ASSERT_SUCCESS(ret, "Failed to get adapter capabilities\n");
+
+	if (!(cap & RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT))
+		test_run_adapter_as_service();
+
+	mode = RTE_EVENT_CRYPTO_ADAPTER_DEQ_ONLY;
+	TEST_ASSERT_SUCCESS(rte_event_crypto_adapter_start(TEST_ADAPTER_ID,
+				mode), "Failed to start event crypto adapter");
+
+	ret = test_deq_only_mode(0);
+	TEST_ASSERT_SUCCESS(ret, "Session based - DEQ only mode test "
+				"failed!\n");
+	return TEST_SUCCESS;
+}
+
+static int
+configure_cryptodev(void)
+{
+	struct event_crypto_adapter_test_params *params = &t_params;
+	struct rte_cryptodev_qp_conf qp_conf;
+	struct rte_cryptodev_config conf;
+	struct rte_cryptodev_info info;
+	unsigned int session_size;
+	uint8_t nb_devs;
+	int ret;
+	uint16_t qp_id = 0;
+
+	memset(params, 0, sizeof(*params));
+
+	params->mbuf_pool = rte_pktmbuf_pool_create(
+			"CRYPTO_ADAPTER_MBUFPOOL",
+			NUM_MBUFS, MBUF_CACHE_SIZE, 0, MBUF_SIZE,
+			rte_socket_id());
+	if (params->mbuf_pool == NULL) {
+		RTE_LOG(ERR, USER1, "Can't create CRYPTO_MBUFPOOL\n");
+		return TEST_FAILED;
+	}
+
+	params->op_mpool = rte_crypto_op_pool_create(
+			"EVENT_CRYPTO_SYM_OP_POOL",
+			RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+			NUM_MBUFS, MBUF_CACHE_SIZE,
+			DEFAULT_NUM_XFORMS *
+			sizeof(struct rte_crypto_sym_xform) +
+			MAXIMUM_IV_LENGTH,
+			rte_socket_id());
+	if (params->op_mpool == NULL) {
+		RTE_LOG(ERR, USER1, "Can't create CRYPTO_OP_POOL\n");
+		return TEST_FAILED;
+	}
+
+	/* Create a NULL crypto device */
+	nb_devs = rte_cryptodev_device_count_by_driver(
+			rte_cryptodev_driver_id_get(
+			RTE_STR(CRYPTODEV_NAME_NULL_PMD)));
+	if (!nb_devs) {
+		ret = rte_vdev_init(
+			RTE_STR(CRYPTODEV_NAME_NULL_PMD), NULL);
+
+		TEST_ASSERT(ret == 0,
+			"Failed to create instance of"
+			" pmd : %s\n",
+			RTE_STR(CRYPTODEV_NAME_NULL_PMD));
+	}
+
+	nb_devs = rte_cryptodev_count();
+	if (!nb_devs) {
+		RTE_LOG(ERR, USER1, "No crypto devices found?\n");
+		return TEST_FAILED;
+	}
+
+	/* Set up a queue pair */
+	params->cdev_id = 0;
+	rte_cryptodev_info_get(params->cdev_id, &info);
+
+	conf.nb_queue_pairs = info.max_nb_queue_pairs;
+	conf.socket_id = SOCKET_ID_ANY;
+
+	session_size = rte_cryptodev_get_private_session_size(params->cdev_id);
+	session_size += sizeof(union rte_event_crypto_metadata);
+	/*
+	 * Create mempool with maximum number of sessions * 2,
+	 * to include the session headers
+	 */
+	params->session_mpool = rte_mempool_create(
+				"CRYPTO_ADAPTER_SESSION_MP",
+				info.sym.max_nb_sessions * 2,
+				session_size,
+				0, 0, NULL, NULL, NULL,
+				NULL, SOCKET_ID_ANY,
+				0);
+
+	TEST_ASSERT_NOT_NULL(params->session_mpool,
+			"session mempool allocation failed\n");
+
+	TEST_ASSERT_SUCCESS(rte_cryptodev_configure(params->cdev_id,
+			&conf),
+			"Failed to configure cryptodev %u with %u qps\n",
+			params->cdev_id, conf.nb_queue_pairs);
+
+	qp_conf.nb_descriptors = DEFAULT_NUM_OPS_INFLIGHT;
+
+	TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
+			params->cdev_id, qp_id, &qp_conf,
+			rte_cryptodev_socket_id(params->cdev_id),
+			params->session_mpool),
+			"Failed to setup queue pair %u on cryptodev %u\n",
+			qp_id, params->cdev_id);
+
+	return TEST_SUCCESS;
+}
+
+static inline void
+evdev_set_conf_values(struct rte_event_dev_config *dev_conf,
+			struct rte_event_dev_info *info)
+{
+	memset(dev_conf, 0, sizeof(struct rte_event_dev_config));
+	dev_conf->dequeue_timeout_ns = info->min_dequeue_timeout_ns;
+	dev_conf->nb_event_ports = NB_TEST_PORTS;
+	dev_conf->nb_event_queues = NB_TEST_QUEUES;
+	dev_conf->nb_event_queue_flows = info->max_event_queue_flows;
+	dev_conf->nb_event_port_dequeue_depth =
+			info->max_event_port_dequeue_depth;
+	dev_conf->nb_event_port_enqueue_depth =
+			info->max_event_port_enqueue_depth;
+	dev_conf->nb_event_port_enqueue_depth =
+			info->max_event_port_enqueue_depth;
+	dev_conf->nb_events_limit =
+			info->max_num_events;
+}
+
+static int
+configure_eventdev(void)
+{
+	const char *eventdev_name = "event_sw0";
+	struct rte_event_queue_conf queue_conf;
+	struct rte_event_dev_config devconf;
+	struct rte_event_dev_info info;
+	uint32_t queue_count;
+	uint32_t port_count;
+	int ret;
+	uint8_t qid;
+
+	evdev = rte_event_dev_get_dev_id(eventdev_name);
+	if (evdev < 0) {
+		if (rte_vdev_init(eventdev_name, NULL) < 0) {
+			RTE_LOG(DEBUG, USER1, "Error creating eventdev\n");
+			return TEST_FAILED;
+		}
+		evdev = rte_event_dev_get_dev_id(eventdev_name);
+		if (evdev < 0) {
+			RTE_LOG(DEBUG, USER1, "Error finding newly created "
+				"eventdev\n");
+			return TEST_FAILED;
+		}
+	}
+
+	ret = rte_event_dev_info_get(evdev, &info);
+	TEST_ASSERT_SUCCESS(ret, "Failed to get event dev info\n");
+
+	evdev_set_conf_values(&devconf, &info);
+
+	ret = rte_event_dev_configure(evdev, &devconf);
+	TEST_ASSERT_SUCCESS(ret, "Failed to configure eventdev\n");
+
+	/* Set up event queue */
+	ret = rte_event_dev_attr_get(evdev, RTE_EVENT_DEV_ATTR_QUEUE_COUNT,
+					&queue_count);
+	TEST_ASSERT_SUCCESS(ret, "Queue count get failed\n");
+	TEST_ASSERT_EQUAL(queue_count, 2, "Unexpected queue count\n");
+
+	qid = TEST_EV_APP_QUEUE_ID;
+	ret = rte_event_queue_setup(evdev, qid, NULL);
+	TEST_ASSERT_SUCCESS(ret, "Failed to setup queue=%d\n", qid);
+
+	queue_conf.nb_atomic_flows = info.max_event_queue_flows;
+	queue_conf.nb_atomic_order_sequences = 32;
+	queue_conf.schedule_type = RTE_SCHED_TYPE_ATOMIC;
+	queue_conf.priority = RTE_EVENT_DEV_PRIORITY_HIGHEST;
+	queue_conf.event_queue_cfg = RTE_EVENT_QUEUE_CFG_SINGLE_LINK;
+
+	qid = TEST_EV_CRYPTO_QUEUE_ID;
+	ret = rte_event_queue_setup(evdev, qid, &queue_conf);
+	TEST_ASSERT_SUCCESS(ret, "Failed to setup directed queue=%u\n", qid);
+
+	/* Set up event port */
+	ret = rte_event_dev_attr_get(evdev, RTE_EVENT_DEV_ATTR_PORT_COUNT,
+					&port_count);
+	TEST_ASSERT_SUCCESS(ret, "Port count get failed\n");
+	TEST_ASSERT_EQUAL(port_count, 1, "Unexpected port count\n");
+
+	ret = rte_event_port_setup(evdev, TEST_PORT_ID, NULL);
+	TEST_ASSERT_SUCCESS(ret, "Failed to setup port=%d\n", TEST_PORT_ID);
+
+	qid = TEST_EV_APP_QUEUE_ID;
+	ret = rte_event_port_link(evdev, TEST_PORT_ID, &qid, NULL, 1);
+	TEST_ASSERT(ret >= 0, "Failed to link queue port=%d\n", TEST_PORT_ID);
+
+	return TEST_SUCCESS;
+}
+
+static void
+test_crypto_adapter_free(void)
+{
+	rte_event_crypto_adapter_free(TEST_ADAPTER_ID);
+}
+
+static int
+test_crypto_adapter_create(void)
+{
+	struct event_crypto_adapter_test_params *params = &t_params;
+	struct rte_event_port_conf conf = {
+		.dequeue_depth = 8,
+		.enqueue_depth = 8,
+		.new_event_threshold = 1200,
+	};
+	int ret;
+
+	/* Create adapter with default port creation callback */
+	ret = rte_event_crypto_adapter_create(TEST_ADAPTER_ID,
+					      params->cdev_id,
+					      &conf);
+	TEST_ASSERT_SUCCESS(ret, "Failed to create event crypto adapter\n");
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_crypto_adapter_qp_add_del(void)
+{
+	struct event_crypto_adapter_test_params *params = &t_params;
+	int ret;
+
+	ret = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID,
+					    params->cdev_id, 0);
+	TEST_ASSERT_SUCCESS(ret, "Failed to create add queue pair\n");
+
+	ret = rte_event_crypto_adapter_queue_pair_del(TEST_ADAPTER_ID,
+					    params->cdev_id, 0);
+	TEST_ASSERT_SUCCESS(ret, "Failed to delete add queue pair\n");
+
+	return TEST_SUCCESS;
+}
+
+static int
+configure_event_crypto_adapter(void)
+{
+	struct event_crypto_adapter_test_params *params = &t_params;
+	struct rte_event_port_conf conf = {
+		.dequeue_depth = 8,
+		.enqueue_depth = 8,
+		.new_event_threshold = 1200,
+	};
+	int ret;
+
+	/* Create adapter with default port creation callback */
+	ret = rte_event_crypto_adapter_create(TEST_ADAPTER_ID,
+					      params->cdev_id,
+					      &conf);
+	TEST_ASSERT_SUCCESS(ret, "Failed to create event crypto adapter\n");
+
+	ret = rte_event_crypto_adapter_queue_pair_add(TEST_ADAPTER_ID,
+					    params->cdev_id, 0);
+	TEST_ASSERT_SUCCESS(ret, "Failed to add queue pair\n");
+
+	ret = rte_event_crypto_adapter_event_port_get(TEST_ADAPTER_ID,
+					      &params->crypto_event_port_id);
+	TEST_ASSERT_SUCCESS(ret, "Failed to get event port\n");
+
+	return TEST_SUCCESS;
+}
+
+static void
+test_crypto_adapter_stop(void)
+{
+	uint32_t evdev_service_id, adapter_service_id;
+
+	/* retrieve service ids */
+	rte_event_dev_service_id_get(evdev, &evdev_service_id);
+	rte_event_crypto_adapter_service_id_get(
+			TEST_ADAPTER_ID, &adapter_service_id);
+
+	/* stop services */
+	rte_service_runstate_set(evdev_service_id, 0);
+	rte_service_runstate_set(adapter_service_id, 0);
+	rte_service_lcore_stop(slcore_id);
+	rte_service_lcore_del(slcore_id);
+	rte_event_crypto_adapter_stop(TEST_ADAPTER_ID);
+	rte_event_dev_stop(evdev);
+}
+
+static int
+test_crypto_adapter_conf(void)
+{
+	uint32_t evdev_service_id;
+	uint8_t qid;
+	int ret;
+	struct event_crypto_adapter_test_params *params = &t_params;
+
+	if (!crypto_adapter_setup_done) {
+		ret = configure_event_crypto_adapter();
+		if (!ret) {
+			qid = TEST_EV_CRYPTO_QUEUE_ID;
+			ret = rte_event_port_link(evdev,
+				params->crypto_event_port_id, &qid, NULL, 1);
+			TEST_ASSERT(ret >= 0, "Failed to link queue %d "
+					"port=%u\n", qid,
+					params->crypto_event_port_id);
+		}
+		crypto_adapter_setup_done = 1;
+	}
+
+	/* retrieve service ids */
+	TEST_ASSERT_SUCCESS(rte_event_dev_service_id_get(evdev,
+			    &evdev_service_id), "Failed to get event device "
+			    "service id");
+
+	/* add a service core and start it */
+	TEST_ASSERT_SUCCESS(rte_service_lcore_add(slcore_id),
+			"Failed to add service core");
+	TEST_ASSERT_SUCCESS(rte_service_lcore_start(slcore_id),
+			"Failed to start service core");
+
+	/* map services to it */
+	TEST_ASSERT_SUCCESS(rte_service_map_lcore_set(evdev_service_id,
+			slcore_id, 1), "Failed to map evdev service");
+
+	/* set services to running */
+	TEST_ASSERT_SUCCESS(rte_service_runstate_set(evdev_service_id, 1),
+			"Failed to start evdev service");
+
+	/* start the eventdev */
+	TEST_ASSERT_SUCCESS(rte_event_dev_start(evdev),
+			"Failed to start event device");
+
+	return TEST_SUCCESS;
+}
+
+static int
+testsuite_setup(void)
+{
+	int ret;
+
+	slcore_id = rte_get_next_lcore(-1, 1, 0);
+	TEST_ASSERT_NOT_EQUAL(slcore_id, RTE_MAX_LCORE, "At least 2 lcores "
+			"are required to run this autotest\n");
+
+	/* Setup and start event device. */
+	ret = configure_eventdev();
+	TEST_ASSERT_SUCCESS(ret, "Failed to setup eventdev\n");
+
+	/* Setup and start crypto device. */
+	ret = configure_cryptodev();
+	TEST_ASSERT_SUCCESS(ret, "cryptodev initialization failed\n");
+
+	return TEST_SUCCESS;
+}
+
+static void
+crypto_teardown(void)
+{
+	struct event_crypto_adapter_test_params *params = &t_params;
+
+	/* Free mbuf mempool */
+	if (params->mbuf_pool != NULL) {
+		RTE_LOG(DEBUG, USER1, "CRYPTO_ADAPTER_MBUFPOOL count %u\n",
+		rte_mempool_avail_count(params->mbuf_pool));
+		rte_mempool_free(params->mbuf_pool);
+		params->mbuf_pool = NULL;
+	}
+
+	/* Free session mempool */
+	if (params->session_mpool != NULL) {
+		RTE_LOG(DEBUG, USER1, "CRYPTO_ADAPTER_SESSION_MP count %u\n",
+		rte_mempool_avail_count(params->session_mpool));
+		rte_mempool_free(params->session_mpool);
+		params->session_mpool = NULL;
+	}
+
+	/* Free ops mempool */
+	if (params->op_mpool != NULL) {
+		RTE_LOG(DEBUG, USER1, "EVENT_CRYPTO_SYM_OP_POOL count %u\n",
+		rte_mempool_avail_count(params->op_mpool));
+		rte_mempool_free(params->op_mpool);
+		params->op_mpool = NULL;
+	}
+}
+
+static void
+eventdev_teardown(void)
+{
+	rte_event_dev_stop(evdev);
+}
+
+static void
+testsuite_teardown(void)
+{
+	crypto_teardown();
+	eventdev_teardown();
+}
+
+static struct unit_test_suite service_tests  = {
+	.suite_name = "Event crypto adapter test suite",
+	.setup = testsuite_setup,
+	.teardown = testsuite_teardown,
+	.unit_test_cases = {
+
+		TEST_CASE_ST(NULL, test_crypto_adapter_free,
+				test_crypto_adapter_create),
+
+		TEST_CASE_ST(test_crypto_adapter_create,
+				test_crypto_adapter_free,
+				test_crypto_adapter_qp_add_del),
+
+		TEST_CASE_ST(test_crypto_adapter_create,
+				test_crypto_adapter_free,
+				test_crypto_adapter_stats),
+
+		TEST_CASE_ST(test_crypto_adapter_conf,
+				test_crypto_adapter_stop,
+				test_session_with_enq_deq_mode),
+
+		TEST_CASE_ST(test_crypto_adapter_conf,
+				test_crypto_adapter_stop,
+				test_sessionless_with_enq_deq_mode),
+
+		TEST_CASE_ST(test_crypto_adapter_conf,
+				test_crypto_adapter_stop,
+				test_session_with_deq_only_mode),
+
+		TEST_CASE_ST(test_crypto_adapter_conf,
+				test_crypto_adapter_stop,
+				test_sessionless_with_deq_only_mode),
+
+		TEST_CASES_END() /**< NULL terminate unit test array */
+	}
+};
+
+static int
+test_event_crypto_adapter(void)
+{
+	return unit_test_suite_runner(&service_tests);
+}
+
+REGISTER_TEST_COMMAND(event_crypto_adapter_autotest,
+		test_event_crypto_adapter);