@@ -656,8 +656,25 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
{
struct ibv_context *ctx;
struct ibv_device_attr_ex attr;
+ struct ibv_port_attr port_attr;
struct ibv_pd *pd = NULL;
struct mlx5dv_context dv_attr = { .comp_mask = 0 };
+ struct mlx5_dev_config config = {
+ .vf = !!vf,
+ .tx_vec_en = 1,
+ .rx_vec_en = 1,
+ .mpw_hdr_dseg = 0,
+ .txq_inline = MLX5_ARG_UNSET,
+ .txqs_inline = MLX5_ARG_UNSET,
+ .inline_max_packet_sz = MLX5_ARG_UNSET,
+ .vf_nl_en = 1,
+ .mprq = {
+ .enabled = 0,
+ .stride_num_n = MLX5_MPRQ_STRIDE_NUM_N,
+ .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
+ .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
+ },
+ };
struct rte_eth_dev *eth_dev = NULL;
struct priv *priv = NULL;
int err = 0;
@@ -675,6 +692,8 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
struct ibv_counter_set_description cs_desc = { .counter_type = 0 };
#endif
+ struct ether_addr mac;
+ char name[RTE_ETH_NAME_MAX_LEN];
/* Prepare shared data between primary and secondary process. */
mlx5_prepare_shared_data();
@@ -710,11 +729,13 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
DRV_LOG(DEBUG, "MPW isn't supported");
mps = MLX5_MPW_DISABLED;
}
+ config.mps = mps;
#ifdef HAVE_IBV_MLX5_MOD_SWP
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_SWP)
swp = dv_attr.sw_parsing_caps.sw_parsing_offloads;
DRV_LOG(DEBUG, "SWP support: %u", swp);
#endif
+ config.swp = !!swp;
#ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_STRIDING_RQ) {
struct mlx5dv_striding_rq_caps mprq_caps =
@@ -740,6 +761,8 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
mprq_caps.min_single_wqe_log_num_of_strides;
mprq_max_stride_num_n =
mprq_caps.max_single_wqe_log_num_of_strides;
+ config.mprq.stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
+ mprq_min_stride_num_n);
}
#endif
if (RTE_CACHE_LINE_SIZE == 128 &&
@@ -747,6 +770,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
cqe_comp = 0;
else
cqe_comp = 1;
+ config.cqe_comp = cqe_comp;
#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
tunnel_en = ((dv_attr.tunnel_offloads_caps &
@@ -760,6 +784,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
DRV_LOG(WARNING,
"tunnel offloading disabled due to old OFED/rdma-core version");
#endif
+ config.tunnel_en = tunnel_en;
#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
mpls_en = ((dv_attr.tunnel_offloads_caps &
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_GRE) &&
@@ -771,326 +796,287 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
DRV_LOG(WARNING, "MPLS over GRE/UDP tunnel offloading disabled due to"
" old OFED/rdma-core version or firmware configuration");
#endif
+ config.mpls_en = mpls_en;
err = mlx5_glue->query_device_ex(ctx, NULL, &attr);
if (err) {
DEBUG("ibv_query_device_ex() failed");
goto error;
}
- {
- char name[RTE_ETH_NAME_MAX_LEN];
- struct ibv_port_attr port_attr;
- struct ether_addr mac;
- struct mlx5_dev_config config = {
- .cqe_comp = cqe_comp,
- .mps = mps,
- .tunnel_en = tunnel_en,
- .mpls_en = mpls_en,
- .tx_vec_en = 1,
- .rx_vec_en = 1,
- .mpw_hdr_dseg = 0,
- .txq_inline = MLX5_ARG_UNSET,
- .txqs_inline = MLX5_ARG_UNSET,
- .inline_max_packet_sz = MLX5_ARG_UNSET,
- .vf_nl_en = 1,
- .swp = !!swp,
- .mprq = {
- .enabled = 0, /* Disabled by default. */
- .stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
- mprq_min_stride_num_n),
- .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
- .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
- },
- };
-
- rte_strlcpy(name, dpdk_dev->name, sizeof(name));
- if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
- eth_dev = rte_eth_dev_attach_secondary(name);
- if (eth_dev == NULL) {
- DRV_LOG(ERR, "can not attach rte ethdev");
- rte_errno = ENOMEM;
- err = rte_errno;
- goto error;
- }
- eth_dev->device = dpdk_dev;
- eth_dev->dev_ops = &mlx5_dev_sec_ops;
- err = mlx5_uar_init_secondary(eth_dev);
- if (err) {
- err = rte_errno;
- goto error;
- }
- /* Receive command fd from primary process */
- err = mlx5_socket_connect(eth_dev);
- if (err < 0) {
- err = rte_errno;
- goto error;
- }
- /* Remap UAR for Tx queues. */
- err = mlx5_tx_uar_remap(eth_dev, err);
- if (err) {
- err = rte_errno;
- goto error;
- }
- /*
- * Ethdev pointer is still required as input since
- * the primary device is not accessible from the
- * secondary process.
- */
- eth_dev->rx_pkt_burst =
- mlx5_select_rx_function(eth_dev);
- eth_dev->tx_pkt_burst =
- mlx5_select_tx_function(eth_dev);
- claim_zero(mlx5_glue->close_device(ctx));
- return eth_dev;
- }
- /* Check port status. */
- err = mlx5_glue->query_port(ctx, 1, &port_attr);
- if (err) {
- DRV_LOG(ERR, "port query failed: %s", strerror(err));
- goto error;
- }
- if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
- DRV_LOG(ERR, "port is not configured in Ethernet mode");
- err = EINVAL;
- goto error;
- }
- if (port_attr.state != IBV_PORT_ACTIVE)
- DRV_LOG(DEBUG, "port is not active: \"%s\" (%d)",
- mlx5_glue->port_state_str(port_attr.state),
- port_attr.state);
- /* Allocate protection domain. */
- pd = mlx5_glue->alloc_pd(ctx);
- if (pd == NULL) {
- DRV_LOG(ERR, "PD allocation failure");
- err = ENOMEM;
- goto error;
- }
- /* from rte_ethdev.c */
- priv = rte_zmalloc("ethdev private structure",
- sizeof(*priv),
- RTE_CACHE_LINE_SIZE);
- if (priv == NULL) {
- DRV_LOG(ERR, "priv allocation failure");
- err = ENOMEM;
- goto error;
- }
- priv->ctx = ctx;
- strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path,
- sizeof(priv->ibdev_path));
- priv->device_attr = attr;
- priv->pd = pd;
- priv->mtu = ETHER_MTU;
- err = mlx5_args(&config, dpdk_dev->devargs);
- if (err) {
- err = rte_errno;
- DRV_LOG(ERR, "failed to process device arguments: %s",
- strerror(rte_errno));
- goto error;
- }
- config.hw_csum = !!(attr.device_cap_flags_ex &
- IBV_DEVICE_RAW_IP_CSUM);
- DRV_LOG(DEBUG, "checksum offloading is %ssupported",
- (config.hw_csum ? "" : "not "));
-#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
- config.flow_counter_en = !!attr.max_counter_sets;
- mlx5_glue->describe_counter_set(ctx, 0, &cs_desc);
- DRV_LOG(DEBUG,
- "counter type = %d, num of cs = %ld, attributes = %d",
- cs_desc.counter_type, cs_desc.num_of_cs,
- cs_desc.attributes);
-#endif
- config.ind_table_max_size =
- attr.rss_caps.max_rwq_indirection_table_size;
- /* Remove this check once DPDK supports larger/variable
- * indirection tables. */
- if (config.ind_table_max_size >
- (unsigned int)ETH_RSS_RETA_SIZE_512)
- config.ind_table_max_size = ETH_RSS_RETA_SIZE_512;
- DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
- config.ind_table_max_size);
- config.hw_vlan_strip = !!(attr.raw_packet_caps &
- IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
- DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
- (config.hw_vlan_strip ? "" : "not "));
-
- config.hw_fcs_strip = !!(attr.raw_packet_caps &
- IBV_RAW_PACKET_CAP_SCATTER_FCS);
- DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
- (config.hw_fcs_strip ? "" : "not "));
-
-#ifdef HAVE_IBV_WQ_FLAG_RX_END_PADDING
- config.hw_padding = !!attr.rx_pad_end_addr_align;
-#endif
- DRV_LOG(DEBUG,
- "hardware Rx end alignment padding is %ssupported",
- (config.hw_padding ? "" : "not "));
- config.vf = vf;
- config.tso = (attr.tso_caps.max_tso > 0 &&
- (attr.tso_caps.supported_qpts &
- (1 << IBV_QPT_RAW_PACKET)));
- if (config.tso)
- config.tso_max_payload_sz = attr.tso_caps.max_tso;
- if (config.mps && !mps) {
- DRV_LOG(ERR,
- "multi-packet send not supported on this device"
- " (" MLX5_TXQ_MPW_EN ")");
- err = ENOTSUP;
- goto error;
- }
- DRV_LOG(INFO, "%s MPS is %s",
- config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
- config.mps != MLX5_MPW_DISABLED ? "enabled" :
- "disabled");
- if (config.cqe_comp && !cqe_comp) {
- DRV_LOG(WARNING, "Rx CQE compression isn't supported");
- config.cqe_comp = 0;
- }
- if (config.mprq.enabled && mprq) {
- if (config.mprq.stride_num_n > mprq_max_stride_num_n ||
- config.mprq.stride_num_n < mprq_min_stride_num_n) {
- config.mprq.stride_num_n =
- RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
- mprq_min_stride_num_n);
- DRV_LOG(WARNING,
- "the number of strides"
- " for Multi-Packet RQ is out of range,"
- " setting default value (%u)",
- 1 << config.mprq.stride_num_n);
- }
- config.mprq.min_stride_size_n = mprq_min_stride_size_n;
- config.mprq.max_stride_size_n = mprq_max_stride_size_n;
- } else if (config.mprq.enabled && !mprq) {
- DRV_LOG(WARNING, "Multi-Packet RQ isn't supported");
- config.mprq.enabled = 0;
- }
- eth_dev = rte_eth_dev_allocate(name);
+ rte_strlcpy(name, dpdk_dev->name, sizeof(name));
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ eth_dev = rte_eth_dev_attach_secondary(name);
if (eth_dev == NULL) {
- DRV_LOG(ERR, "can not allocate rte ethdev");
- err = ENOMEM;
+ DRV_LOG(ERR, "can not attach rte ethdev");
+ rte_errno = ENOMEM;
+ err = rte_errno;
goto error;
}
- eth_dev->data->dev_private = priv;
- priv->dev_data = eth_dev->data;
- eth_dev->data->mac_addrs = priv->mac;
eth_dev->device = dpdk_dev;
- eth_dev->device->driver = &mlx5_driver.driver;
- err = mlx5_uar_init_primary(eth_dev);
+ eth_dev->dev_ops = &mlx5_dev_sec_ops;
+ err = mlx5_uar_init_secondary(eth_dev);
if (err) {
err = rte_errno;
goto error;
}
- /* Configure the first MAC address by default. */
- if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
- DRV_LOG(ERR,
- "port %u cannot get MAC address, is mlx5_en"
- " loaded? (errno: %s)",
- eth_dev->data->port_id, strerror(rte_errno));
- err = ENODEV;
- goto error;
- }
- DRV_LOG(INFO,
- "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
- eth_dev->data->port_id,
- mac.addr_bytes[0], mac.addr_bytes[1],
- mac.addr_bytes[2], mac.addr_bytes[3],
- mac.addr_bytes[4], mac.addr_bytes[5]);
-#ifndef NDEBUG
- {
- char ifname[IF_NAMESIZE];
-
- if (mlx5_get_ifname(eth_dev, &ifname) == 0)
- DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
- eth_dev->data->port_id, ifname);
- else
- DRV_LOG(DEBUG, "port %u ifname is unknown",
- eth_dev->data->port_id);
- }
-#endif
- /* Get actual MTU if possible. */
- err = mlx5_get_mtu(eth_dev, &priv->mtu);
- if (err) {
+ /* Receive command fd from primary process */
+ err = mlx5_socket_connect(eth_dev);
+ if (err < 0) {
err = rte_errno;
goto error;
}
- DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id,
- priv->mtu);
- /*
- * Initialize burst functions to prevent crashes before link-up.
- */
- eth_dev->rx_pkt_burst = removed_rx_burst;
- eth_dev->tx_pkt_burst = removed_tx_burst;
- eth_dev->dev_ops = &mlx5_dev_ops;
- /* Register MAC address. */
- claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
- priv->nl_socket = -1;
- priv->nl_sn = 0;
- if (vf && config.vf_nl_en) {
- priv->nl_socket = mlx5_nl_init(RTMGRP_LINK);
- if (priv->nl_socket < 0)
- priv->nl_socket = -1;
- mlx5_nl_mac_addr_sync(eth_dev);
- }
- TAILQ_INIT(&priv->flows);
- TAILQ_INIT(&priv->ctrl_flows);
- /* Hint libmlx5 to use PMD allocator for data plane resources */
- struct mlx5dv_ctx_allocators alctr = {
- .alloc = &mlx5_alloc_verbs_buf,
- .free = &mlx5_free_verbs_buf,
- .data = priv,
- };
- mlx5_glue->dv_set_context_attr(ctx,
- MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
- (void *)((uintptr_t)&alctr));
- /* Bring Ethernet device up. */
- DRV_LOG(DEBUG, "port %u forcing Ethernet interface up",
- eth_dev->data->port_id);
- mlx5_set_link_up(eth_dev);
- /*
- * Even though the interrupt handler is not installed yet,
- * interrupts will still trigger on the asyn_fd from
- * Verbs context returned by ibv_open_device().
- */
- mlx5_link_update(eth_dev, 0);
- /* Store device configuration on private structure. */
- priv->config = config;
- /* Create drop queue. */
- err = mlx5_flow_create_drop_queue(eth_dev);
+ /* Remap UAR for Tx queues. */
+ err = mlx5_tx_uar_remap(eth_dev, err);
if (err) {
- DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
- eth_dev->data->port_id, strerror(rte_errno));
err = rte_errno;
goto error;
}
- /* Supported Verbs flow priority number detection. */
- if (verb_priorities == 0)
- verb_priorities = mlx5_get_max_verbs_prio(eth_dev);
- if (verb_priorities < MLX5_VERBS_FLOW_PRIO_8) {
- DRV_LOG(ERR, "port %u wrong Verbs flow priorities: %u",
- eth_dev->data->port_id, verb_priorities);
- err = ENOTSUP;
- goto error;
- }
- priv->config.max_verbs_prio = verb_priorities;
/*
- * Once the device is added to the list of memory event
- * callback, its global MR cache table cannot be expanded
- * on the fly because of deadlock. If it overflows, lookup
- * should be done by searching MR list linearly, which is slow.
+ * Ethdev pointer is still required as input since
+ * the primary device is not accessible from the
+ * secondary process.
*/
- err = mlx5_mr_btree_init(&priv->mr.cache,
- MLX5_MR_BTREE_CACHE_N * 2,
- eth_dev->device->numa_node);
- if (err) {
- err = rte_errno;
- goto error;
- }
- /* Add device to memory callback list. */
- rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
- LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
- priv, mem_event_cb);
- rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
- rte_eth_dev_probing_finish(eth_dev);
+ eth_dev->rx_pkt_burst = mlx5_select_rx_function(eth_dev);
+ eth_dev->tx_pkt_burst = mlx5_select_tx_function(eth_dev);
+ claim_zero(mlx5_glue->close_device(ctx));
return eth_dev;
}
+ /* Check port status. */
+ err = mlx5_glue->query_port(ctx, 1, &port_attr);
+ if (err) {
+ DRV_LOG(ERR, "port query failed: %s", strerror(err));
+ goto error;
+ }
+ if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
+ DRV_LOG(ERR, "port is not configured in Ethernet mode");
+ err = EINVAL;
+ goto error;
+ }
+ if (port_attr.state != IBV_PORT_ACTIVE)
+ DRV_LOG(DEBUG, "port is not active: \"%s\" (%d)",
+ mlx5_glue->port_state_str(port_attr.state),
+ port_attr.state);
+ /* Allocate protection domain. */
+ pd = mlx5_glue->alloc_pd(ctx);
+ if (pd == NULL) {
+ DRV_LOG(ERR, "PD allocation failure");
+ err = ENOMEM;
+ goto error;
+ }
+ priv = rte_zmalloc("ethdev private structure",
+ sizeof(*priv),
+ RTE_CACHE_LINE_SIZE);
+ if (priv == NULL) {
+ DRV_LOG(ERR, "priv allocation failure");
+ err = ENOMEM;
+ goto error;
+ }
+ priv->ctx = ctx;
+ strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path,
+ sizeof(priv->ibdev_path));
+ priv->device_attr = attr;
+ priv->pd = pd;
+ priv->mtu = ETHER_MTU;
+ err = mlx5_args(&config, dpdk_dev->devargs);
+ if (err) {
+ err = rte_errno;
+ DRV_LOG(ERR, "failed to process device arguments: %s",
+ strerror(rte_errno));
+ goto error;
+ }
+ config.hw_csum = !!(attr.device_cap_flags_ex & IBV_DEVICE_RAW_IP_CSUM);
+ DRV_LOG(DEBUG, "checksum offloading is %ssupported",
+ (config.hw_csum ? "" : "not "));
+#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
+ config.flow_counter_en = !!attr.max_counter_sets;
+ mlx5_glue->describe_counter_set(ctx, 0, &cs_desc);
+ DRV_LOG(DEBUG, "counter type = %d, num of cs = %ld, attributes = %d",
+ cs_desc.counter_type, cs_desc.num_of_cs,
+ cs_desc.attributes);
+#endif
+ config.ind_table_max_size =
+ attr.rss_caps.max_rwq_indirection_table_size;
+ /*
+ * Remove this check once DPDK supports larger/variable
+ * indirection tables.
+ */
+ if (config.ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512)
+ config.ind_table_max_size = ETH_RSS_RETA_SIZE_512;
+ DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
+ config.ind_table_max_size);
+ config.hw_vlan_strip = !!(attr.raw_packet_caps &
+ IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
+ DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
+ (config.hw_vlan_strip ? "" : "not "));
+ config.hw_fcs_strip = !!(attr.raw_packet_caps &
+ IBV_RAW_PACKET_CAP_SCATTER_FCS);
+ DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
+ (config.hw_fcs_strip ? "" : "not "));
+#ifdef HAVE_IBV_WQ_FLAG_RX_END_PADDING
+ config.hw_padding = !!attr.rx_pad_end_addr_align;
+#endif
+ DRV_LOG(DEBUG, "hardware Rx end alignment padding is %ssupported",
+ (config.hw_padding ? "" : "not "));
+ config.tso = (attr.tso_caps.max_tso > 0 &&
+ (attr.tso_caps.supported_qpts &
+ (1 << IBV_QPT_RAW_PACKET)));
+ if (config.tso)
+ config.tso_max_payload_sz = attr.tso_caps.max_tso;
+ if (config.mps && !mps) {
+ DRV_LOG(ERR,
+ "multi-packet send not supported on this device"
+ " (" MLX5_TXQ_MPW_EN ")");
+ err = ENOTSUP;
+ goto error;
+ }
+ DRV_LOG(INFO, "%sMPS is %s",
+ config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
+ config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
+ if (config.cqe_comp && !cqe_comp) {
+ DRV_LOG(WARNING, "Rx CQE compression isn't supported");
+ config.cqe_comp = 0;
+ }
+ if (config.mprq.enabled && mprq) {
+ if (config.mprq.stride_num_n > mprq_max_stride_num_n ||
+ config.mprq.stride_num_n < mprq_min_stride_num_n) {
+ config.mprq.stride_num_n =
+ RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
+ mprq_min_stride_num_n);
+ DRV_LOG(WARNING,
+ "the number of strides"
+ " for Multi-Packet RQ is out of range,"
+ " setting default value (%u)",
+ 1 << config.mprq.stride_num_n);
+ }
+ config.mprq.min_stride_size_n = mprq_min_stride_size_n;
+ config.mprq.max_stride_size_n = mprq_max_stride_size_n;
+ } else if (config.mprq.enabled && !mprq) {
+ DRV_LOG(WARNING, "Multi-Packet RQ isn't supported");
+ config.mprq.enabled = 0;
+ }
+ eth_dev = rte_eth_dev_allocate(name);
+ if (eth_dev == NULL) {
+ DRV_LOG(ERR, "can not allocate rte ethdev");
+ err = ENOMEM;
+ goto error;
+ }
+ eth_dev->data->dev_private = priv;
+ priv->dev_data = eth_dev->data;
+ eth_dev->data->mac_addrs = priv->mac;
+ eth_dev->device = dpdk_dev;
+ eth_dev->device->driver = &mlx5_driver.driver;
+ err = mlx5_uar_init_primary(eth_dev);
+ if (err) {
+ err = rte_errno;
+ goto error;
+ }
+ /* Configure the first MAC address by default. */
+ if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
+ DRV_LOG(ERR,
+ "port %u cannot get MAC address, is mlx5_en"
+ " loaded? (errno: %s)",
+ eth_dev->data->port_id, strerror(rte_errno));
+ err = ENODEV;
+ goto error;
+ }
+ DRV_LOG(INFO,
+ "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ eth_dev->data->port_id,
+ mac.addr_bytes[0], mac.addr_bytes[1],
+ mac.addr_bytes[2], mac.addr_bytes[3],
+ mac.addr_bytes[4], mac.addr_bytes[5]);
+#ifndef NDEBUG
+ {
+ char ifname[IF_NAMESIZE];
+
+ if (mlx5_get_ifname(eth_dev, &ifname) == 0)
+ DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
+ eth_dev->data->port_id, ifname);
+ else
+ DRV_LOG(DEBUG, "port %u ifname is unknown",
+ eth_dev->data->port_id);
+ }
+#endif
+ /* Get actual MTU if possible. */
+ err = mlx5_get_mtu(eth_dev, &priv->mtu);
+ if (err) {
+ err = rte_errno;
+ goto error;
+ }
+ DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id,
+ priv->mtu);
+ /* Initialize burst functions to prevent crashes before link-up. */
+ eth_dev->rx_pkt_burst = removed_rx_burst;
+ eth_dev->tx_pkt_burst = removed_tx_burst;
+ eth_dev->dev_ops = &mlx5_dev_ops;
+ /* Register MAC address. */
+ claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
+ priv->nl_socket = -1;
+ priv->nl_sn = 0;
+ if (vf && config.vf_nl_en) {
+ priv->nl_socket = mlx5_nl_init(RTMGRP_LINK);
+ if (priv->nl_socket < 0)
+ priv->nl_socket = -1;
+ mlx5_nl_mac_addr_sync(eth_dev);
+ }
+ TAILQ_INIT(&priv->flows);
+ TAILQ_INIT(&priv->ctrl_flows);
+ /* Hint libmlx5 to use PMD allocator for data plane resources */
+ struct mlx5dv_ctx_allocators alctr = {
+ .alloc = &mlx5_alloc_verbs_buf,
+ .free = &mlx5_free_verbs_buf,
+ .data = priv,
+ };
+ mlx5_glue->dv_set_context_attr(ctx, MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
+ (void *)((uintptr_t)&alctr));
+ /* Bring Ethernet device up. */
+ DRV_LOG(DEBUG, "port %u forcing Ethernet interface up",
+ eth_dev->data->port_id);
+ mlx5_set_link_up(eth_dev);
+ /*
+ * Even though the interrupt handler is not installed yet,
+ * interrupts will still trigger on the asyn_fd from
+ * Verbs context returned by ibv_open_device().
+ */
+ mlx5_link_update(eth_dev, 0);
+ /* Store device configuration on private structure. */
+ priv->config = config;
+ /* Create drop queue. */
+ err = mlx5_flow_create_drop_queue(eth_dev);
+ if (err) {
+ DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
+ eth_dev->data->port_id, strerror(rte_errno));
+ err = rte_errno;
+ goto error;
+ }
+ /* Supported Verbs flow priority number detection. */
+ if (verb_priorities == 0)
+ verb_priorities = mlx5_get_max_verbs_prio(eth_dev);
+ if (verb_priorities < MLX5_VERBS_FLOW_PRIO_8) {
+ DRV_LOG(ERR, "port %u wrong Verbs flow priorities: %u",
+ eth_dev->data->port_id, verb_priorities);
+ err = ENOTSUP;
+ goto error;
+ }
+ priv->config.max_verbs_prio = verb_priorities;
+ /*
+ * Once the device is added to the list of memory event
+ * callback, its global MR cache table cannot be expanded
+ * on the fly because of deadlock. If it overflows, lookup
+ * should be done by searching MR list linearly, which is slow.
+ */
+ err = mlx5_mr_btree_init(&priv->mr.cache,
+ MLX5_MR_BTREE_CACHE_N * 2,
+ eth_dev->device->numa_node);
+ if (err) {
+ err = rte_errno;
+ goto error;
+ }
+ /* Add device to memory callback list. */
+ rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
+ LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
+ priv, mem_event_cb);
+ rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
+ return eth_dev;
error:
if (priv)
rte_free(priv);