[v2] compress/isal: add chained mbuf support
Checks
Commit Message
This patch adds chained mbuf support for input or output buffers
during compression/decompression operations.
V2 - Fixed using chained mbufs with offsets.
Signed-off-by: Lee Daly <lee.daly@intel.com>
---
doc/guides/compressdevs/features/isal.ini | 1 +
doc/guides/compressdevs/isal.rst | 2 -
drivers/compress/isal/isal_compress_pmd.c | 397 ++++++++++++++++++++------
drivers/compress/isal/isal_compress_pmd_ops.c | 5 +-
4 files changed, 321 insertions(+), 84 deletions(-)
Comments
Hi Lee,
> -----Original Message-----
> From: Daly, Lee
> Sent: Wednesday, July 11, 2018 1:40 PM
> To: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>
> Cc: dev@dpdk.org; Daly, Lee <lee.daly@intel.com>
> Subject: [PATCH v2] compress/isal: add chained mbuf support
>
> This patch adds chained mbuf support for input or output buffers during
> compression/decompression operations.
>
> V2 - Fixed using chained mbufs with offsets.
>
> Signed-off-by: Lee Daly <lee.daly@intel.com>
> ---
> doc/guides/compressdevs/features/isal.ini | 1 +
> doc/guides/compressdevs/isal.rst | 2 -
> drivers/compress/isal/isal_compress_pmd.c | 397 ++++++++++++++++++++---
> ---
> drivers/compress/isal/isal_compress_pmd_ops.c | 5 +-
> 4 files changed, 321 insertions(+), 84 deletions(-)
>
> diff --git a/doc/guides/compressdevs/features/isal.ini
> b/doc/guides/compressdevs/features/isal.ini
> index 7183d10..06a95fb 100644
> --- a/doc/guides/compressdevs/features/isal.ini
> +++ b/doc/guides/compressdevs/features/isal.ini
> @@ -8,6 +8,7 @@ CPU SSE = Y
> CPU AVX = Y
> CPU AVX2 = Y
> CPU AVX512 = Y
> +Chained mbufs = Y
There are new feature flags replacing this one.
> Deflate = Y
> Fixed = Y
> Dynamic = Y
> diff --git a/doc/guides/compressdevs/isal.rst
> b/doc/guides/compressdevs/isal.rst
> index 276ff06..3bc3022 100644
> --- a/doc/guides/compressdevs/isal.rst
> +++ b/doc/guides/compressdevs/isal.rst
> @@ -78,8 +78,6 @@ As a result the level mappings from the API to the PMD are
> shown below.
> Limitations
> -----------
>
> -* Chained mbufs will not be supported until a future release, meaning max data
> size being passed to PMD through a single mbuf is 64K - 1. If data is larger than
> this it will need to be split up and sent as multiple operations.
> -
> * Compressdev level 0, no compression, is not supported.
>
> * Checksums will not be supported until future release.
> diff --git a/drivers/compress/isal/isal_compress_pmd.c
> b/drivers/compress/isal/isal_compress_pmd.c
> index 747ded1..70231c4 100644
> --- a/drivers/compress/isal/isal_compress_pmd.c
> +++ b/drivers/compress/isal/isal_compress_pmd.c
> @@ -188,6 +188,211 @@ isal_comp_set_priv_xform_parameters(struct
> isal_priv_xform *priv_xform,
> return 0;
> }
>
> +/* Compression using chained mbufs for input/output data */ static int
> +chained_mbuf_compression(struct rte_comp_op *op, struct isal_comp_qp
> +*qp) {
> + int ret, i;
"i" should be unsigned int.
> + uint8_t segs;
> + uint32_t consumed_data;
> + uint32_t remaining_data = op->src.length;
> + struct rte_mbuf *src = op->m_src;
> + struct rte_mbuf *dst = op->m_dst;
> +
> + /* check for offset passing multiple segments
> + * and point compression stream to input/output buffer
> + */
> + if (op->src.offset > src->data_len) {
>=
> + segs = op->src.offset / src->data_len;
This is assuming that each segment has the same data length.
Better to do a while loop, decreasing the offset (remaining_offset?),
and moving to the next segment, until it is less than the current segment.
> + for (i = 0; i < segs; i++)
> + src = src->next;
> +
> + qp->stream->avail_in = src->data_len -
> + (op->src.offset % src->data_len);
Doing what I suggested above simplifies this, as you can substract "remaining_offset" to data_len.
> + qp->stream->next_in = rte_pktmbuf_mtod_offset(src, uint8_t *,
> + (op->src.offset % src->data_len));
> + } else {
> + qp->stream->avail_in = src->data_len - op->src.offset;
> + qp->stream->next_in = rte_pktmbuf_mtod_offset(src, uint8_t *,
> + op->src.offset);
> + }
> +
> + if (op->dst.offset > dst->data_len) {
> + segs = op->dst.offset / dst->data_len;
> + for (int i = 0; i < segs; i++)
> + dst = dst->next;
Same as above.
> +
> + qp->stream->avail_out = dst->data_len -
> + (op->dst.offset % dst->data_len);
> + qp->stream->next_out = rte_pktmbuf_mtod_offset(dst, uint8_t
> *,
> + (op->dst.offset % dst->data_len));
...
> + if (remaining_data == op->src.length) {
> + consumed_data = src->data_len - qp->stream->avail_in
> -
> + (op->src.offset % src->data_len);
> + } else
> + consumed_data = src->data_len - qp->stream->avail_in;
> +
> + remaining_data -= consumed_data;
What about "remaining_data = op->src.length - qp->stream->total_in"?
This way, you don't need the condition (nor "consumed_data").
> +
> + if (ret != COMP_OK) {
> + ISAL_PMD_LOG(ERR, "Compression operation
> failed\n");
> + op->status = RTE_COMP_OP_STATUS_ERROR;
> + return ret;
> + }
...
> + } else {
> + ISAL_PMD_LOG(ERR,
> + "Not enough input buffer segments\n"
> + "Output Produced: %d\n", op-
> >produced);
This will always be 0, as it is only updated at the end of the function.
> + op->status =
> RTE_COMP_OP_STATUS_INVALID_ARGS;
> + return -1;
> + }
> + }
> +
...
> + ISAL_PMD_LOG(ERR,
> + "Not enough output buffer segments\n"
> + "Output Produced: %d\n", op-
> >produced);
Same as above.
> + op->status =
> +
> RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
> + return -1;
> + }
> + }
> + }
> + op->consumed = qp->stream->total_in;
> + op->produced = qp->stream->total_out;
> +
> + return 0;
> +}
> +
> +/* Decompression using chained mbufs for input/output data */ static
> +int chained_mbuf_decompression(struct rte_comp_op *op, struct
> +isal_comp_qp *qp) {
Most comments from the compression function applies to the decompression one.
> /* Stateless Compression Function */
> static int
> process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp, @@ -
...
> + /* Chained mbufs */
> + if (op->m_src->nb_segs > 1 || op->m_dst->nb_segs > 1) {
> + ret = chained_mbuf_compression(op, qp);
> + if (ret < 0) //check the returns... ensure op status changed.
> + return ret;
> + } else {
> + /* Linear buffer */
> + qp->stream->end_of_stream = 1; /* All input consumed in one
> go */
> + if ((op->src.length + op->src.offset) > op->m_src->data_len) {
This is unnecessary, as the check that you are doing above is effectively the same.
> + ISAL_PMD_LOG(ERR, "Input mbuf not big enough for
> offset.\n");
> + op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
...
> + /* Point compression stream to output buffer */
> + qp->stream->avail_out = op->m_dst->data_len;
Data_len - dst.offset?
> + qp->stream->next_out = rte_pktmbuf_mtod_offset(op->m_dst,
> uint8_t *,
> + op->dst.offset);
>
...
> @@ -291,57 +511,72 @@ process_isal_inflate(struct rte_comp_op *op, struct
> isal_comp_qp *qp)
...
> + /* Chained mbufs */
> + if (op->m_src->nb_segs > 1 || op->m_dst->nb_segs > 1) {
> + ret = chained_mbuf_decompression(op, qp);
> + if (ret != 0)
> + return ret;
> + } else {
> + /* Linear buffer */
> + if ((op->src.length + op->src.offset) > op->m_src->data_len) {
This is unnecessary, as the check that you are doing above is effectively the same.
> + ISAL_PMD_LOG(ERR, "Input mbuf not big enough for
> offset.\n");
> + op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
> return -1;
> - }
...
> + /* Point decompression state to output buffer */
> + qp->state->avail_out = op->m_dst->data_len;
Data_len - dst.offset?
...
> - if (ret != ISAL_DECOMP_OK) {
> - op->status = RTE_COMP_OP_STATUS_ERROR;
> - return ret;
> + op->consumed = op->src.length - qp->state->avail_in;
What about "total_in"?
> + op->produced = qp->state->total_out;
> }
>
> - op->consumed = op->src.length - qp->state->avail_in;
> - op->produced = qp->state->total_out;
> -
> -return ret;
> + return ret;
> }
@@ -8,6 +8,7 @@ CPU SSE = Y
CPU AVX = Y
CPU AVX2 = Y
CPU AVX512 = Y
+Chained mbufs = Y
Deflate = Y
Fixed = Y
Dynamic = Y
@@ -78,8 +78,6 @@ As a result the level mappings from the API to the PMD are shown below.
Limitations
-----------
-* Chained mbufs will not be supported until a future release, meaning max data size being passed to PMD through a single mbuf is 64K - 1. If data is larger than this it will need to be split up and sent as multiple operations.
-
* Compressdev level 0, no compression, is not supported.
* Checksums will not be supported until future release.
@@ -188,6 +188,211 @@ isal_comp_set_priv_xform_parameters(struct isal_priv_xform *priv_xform,
return 0;
}
+/* Compression using chained mbufs for input/output data */
+static int
+chained_mbuf_compression(struct rte_comp_op *op, struct isal_comp_qp *qp)
+{
+ int ret, i;
+ uint8_t segs;
+ uint32_t consumed_data;
+ uint32_t remaining_data = op->src.length;
+ struct rte_mbuf *src = op->m_src;
+ struct rte_mbuf *dst = op->m_dst;
+
+ /* check for offset passing multiple segments
+ * and point compression stream to input/output buffer
+ */
+ if (op->src.offset > src->data_len) {
+ segs = op->src.offset / src->data_len;
+ for (i = 0; i < segs; i++)
+ src = src->next;
+
+ qp->stream->avail_in = src->data_len -
+ (op->src.offset % src->data_len);
+ qp->stream->next_in = rte_pktmbuf_mtod_offset(src, uint8_t *,
+ (op->src.offset % src->data_len));
+ } else {
+ qp->stream->avail_in = src->data_len - op->src.offset;
+ qp->stream->next_in = rte_pktmbuf_mtod_offset(src, uint8_t *,
+ op->src.offset);
+ }
+
+ if (op->dst.offset > dst->data_len) {
+ segs = op->dst.offset / dst->data_len;
+ for (int i = 0; i < segs; i++)
+ dst = dst->next;
+
+ qp->stream->avail_out = dst->data_len -
+ (op->dst.offset % dst->data_len);
+ qp->stream->next_out = rte_pktmbuf_mtod_offset(dst, uint8_t *,
+ (op->dst.offset % dst->data_len));
+ } else {
+ qp->stream->avail_out = dst->data_len - op->dst.offset;
+ qp->stream->next_out = rte_pktmbuf_mtod_offset(dst, uint8_t *,
+ op->dst.offset);
+ }
+
+ if (unlikely(!qp->stream->next_in || !qp->stream->next_out)) {
+ ISAL_PMD_LOG(ERR, "Invalid source or destination buffer\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
+
+ while (qp->stream->internal_state.state != ZSTATE_END) {
+ /* Last segment of data */
+ if (remaining_data <= src->data_len)
+ qp->stream->end_of_stream = 1;
+
+ /* Execute compression operation */
+ ret = isal_deflate(qp->stream);
+
+ if (remaining_data == op->src.length) {
+ consumed_data = src->data_len - qp->stream->avail_in -
+ (op->src.offset % src->data_len);
+ } else
+ consumed_data = src->data_len - qp->stream->avail_in;
+
+ remaining_data -= consumed_data;
+
+ if (ret != COMP_OK) {
+ ISAL_PMD_LOG(ERR, "Compression operation failed\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return ret;
+ }
+
+ if (qp->stream->avail_in == 0 &&
+ qp->stream->total_in != op->src.length) {
+ if (src->next != NULL) {
+ src = src->next;
+ qp->stream->next_in =
+ rte_pktmbuf_mtod(src, uint8_t *);
+ qp->stream->avail_in =
+ RTE_MIN(remaining_data, src->data_len);
+ } else {
+ ISAL_PMD_LOG(ERR,
+ "Not enough input buffer segments\n"
+ "Output Produced: %d\n", op->produced);
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
+ }
+
+ if (qp->stream->avail_out == 0 &&
+ qp->stream->internal_state.state != ZSTATE_END) {
+ if (dst->next != NULL) {
+ dst = dst->next;
+ qp->stream->next_out =
+ rte_pktmbuf_mtod(dst, uint8_t *);
+ qp->stream->avail_out = dst->data_len;
+ } else {
+ ISAL_PMD_LOG(ERR,
+ "Not enough output buffer segments\n"
+ "Output Produced: %d\n", op->produced);
+ op->status =
+ RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
+ return -1;
+ }
+ }
+ }
+ op->consumed = qp->stream->total_in;
+ op->produced = qp->stream->total_out;
+
+ return 0;
+}
+
+/* Decompression using chained mbufs for input/output data */
+static int
+chained_mbuf_decompression(struct rte_comp_op *op, struct isal_comp_qp *qp)
+{
+ int ret, i;
+ uint8_t segs;
+ uint32_t consumed_data;
+ uint32_t remaining_data = op->src.length;
+ struct rte_mbuf *src = op->m_src;
+ struct rte_mbuf *dst = op->m_dst;
+
+ /* check for offset passing multiple segments
+ * and point decompression state to input/output buffer
+ */
+ if (op->src.offset > src->data_len) {
+ segs = op->src.offset / src->data_len;
+ for (i = 0; i < segs; i++)
+ src = src->next;
+
+ qp->state->avail_in =
+ src->data_len - (op->src.offset % src->data_len);
+ qp->state->next_in = rte_pktmbuf_mtod_offset(src,
+ uint8_t *, (op->src.offset % src->data_len));
+ } else {
+ qp->state->avail_in = src->data_len - op->src.offset;
+ qp->state->next_in = rte_pktmbuf_mtod_offset(src, uint8_t *,
+ op->src.offset);
+ }
+ if (op->dst.offset > dst->data_len) {
+ segs = op->dst.offset / dst->data_len;
+ for (i = 0; i < segs; i++)
+ dst = dst->next;
+
+ qp->state->avail_out =
+ dst->data_len - (op->dst.offset % dst->data_len);
+ qp->state->next_out = rte_pktmbuf_mtod_offset(dst, uint8_t *,
+ (op->dst.offset % dst->data_len));
+ } else {
+ qp->state->avail_out = dst->data_len - op->dst.offset;
+ qp->state->next_out = rte_pktmbuf_mtod_offset(dst, uint8_t *,
+ op->dst.offset);
+ }
+ while (qp->state->block_state != ISAL_BLOCK_FINISH) {
+
+ ret = isal_inflate(qp->state);
+
+ if (remaining_data == op->src.length) {
+ consumed_data = src->data_len - qp->state->avail_in -
+ (op->src.offset % src->data_len);
+ } else
+ consumed_data = src->data_len - qp->state->avail_in;
+
+ op->consumed += consumed_data;
+ remaining_data -= consumed_data;
+
+ if (ret != ISAL_DECOMP_OK) {
+ ISAL_PMD_LOG(ERR, "Decompression operation failed\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return ret;
+ }
+
+ if (qp->state->avail_in == 0
+ && op->consumed != op->src.length) {
+ if (src->next != NULL) {
+ src = src->next;
+ qp->state->next_in =
+ rte_pktmbuf_mtod(src, uint8_t *);
+ qp->state->avail_in =
+ RTE_MIN(remaining_data, src->data_len);
+ }
+ }
+
+ if (qp->state->avail_out == 0 &&
+ qp->state->block_state != ISAL_BLOCK_FINISH) {
+ if (dst->next != NULL) {
+ dst = dst->next;
+ qp->state->next_out =
+ rte_pktmbuf_mtod(dst, uint8_t *);
+ qp->state->avail_out = dst->data_len;
+ } else {
+ ISAL_PMD_LOG(ERR,
+ "Not enough output buffer segments\n");
+ op->status =
+ RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
+ return -1;
+ }
+ }
+ }
+ op->produced = qp->state->total_out;
+
+ return 0;
+}
+
/* Stateless Compression Function */
static int
process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
@@ -207,7 +412,7 @@ process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
/* Stateless operation, input will be consumed in one go */
qp->stream->flush = NO_FLUSH;
- /* set op level & intermediate level buffer */
+ /* set compression level & intermediate level buffer size */
qp->stream->level = priv_xform->compress.level;
qp->stream->level_buf_size = priv_xform->level_buffer_size;
@@ -225,57 +430,72 @@ process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
isal_deflate_set_hufftables(qp->stream, NULL,
IGZIP_HUFFTABLE_DEFAULT);
- qp->stream->end_of_stream = 1; /* All input consumed in one go */
- if ((op->src.length + op->src.offset) > op->m_src->data_len) {
- ISAL_PMD_LOG(ERR, "Input mbuf not big enough for offset.\n");
+ if (op->m_src->pkt_len < (op->src.length + op->src.offset)) {
+ ISAL_PMD_LOG(ERR, "Input mbuf(s) not big enough.\n");
op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
return -1;
}
- /* Point compression stream to input buffer */
- qp->stream->avail_in = op->src.length;
- qp->stream->next_in = rte_pktmbuf_mtod_offset(op->m_src, uint8_t *,
- op->src.offset);
- if (op->dst.offset > op->m_dst->data_len) {
- ISAL_PMD_LOG(ERR, "Output mbuf not big enough for offset.\n");
- op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
- return -1;
- }
- /* Point compression stream to output buffer */
- qp->stream->avail_out = op->m_dst->data_len;
- qp->stream->next_out = rte_pktmbuf_mtod_offset(op->m_dst, uint8_t *,
- op->dst.offset);
+ /* Chained mbufs */
+ if (op->m_src->nb_segs > 1 || op->m_dst->nb_segs > 1) {
+ ret = chained_mbuf_compression(op, qp);
+ if (ret < 0) //check the returns... ensure op status changed.
+ return ret;
+ } else {
+ /* Linear buffer */
+ qp->stream->end_of_stream = 1; /* All input consumed in one go */
+ if ((op->src.length + op->src.offset) > op->m_src->data_len) {
+ ISAL_PMD_LOG(ERR, "Input mbuf not big enough for offset.\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
+ /* Point compression stream to input buffer */
+ qp->stream->avail_in = op->src.length;
+ qp->stream->next_in = rte_pktmbuf_mtod_offset(op->m_src, uint8_t *,
+ op->src.offset);
+
+ if (op->dst.offset > op->m_dst->data_len) {
+ ISAL_PMD_LOG(ERR, "Output mbuf not big enough for offset.\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
+ /* Point compression stream to output buffer */
+ qp->stream->avail_out = op->m_dst->data_len;
+ qp->stream->next_out = rte_pktmbuf_mtod_offset(op->m_dst, uint8_t *,
+ op->dst.offset);
- if (unlikely(!qp->stream->next_in || !qp->stream->next_out)) {
- ISAL_PMD_LOG(ERR, "Invalid source or destination buffers\n");
- op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
- return -1;
- }
+ if (unlikely(!qp->stream->next_in || !qp->stream->next_out)) {
+ ISAL_PMD_LOG(ERR, "Invalid source or destination buffers\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
- /* Execute compression operation */
- ret = isal_deflate_stateless(qp->stream);
+ /* Execute compression operation */
+ ret = isal_deflate_stateless(qp->stream);
- /* Check that output buffer did not run out of space */
- if (ret == STATELESS_OVERFLOW) {
- ISAL_PMD_LOG(ERR, "Output buffer not big enough\n");
- op->status = RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
- return ret;
- }
+ /* Check that output buffer did not run out of space */
+ if (ret == STATELESS_OVERFLOW) {
+ ISAL_PMD_LOG(ERR, "Output buffer not big enough\n");
+ op->status = RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
+ return ret;
+ }
- /* Check that input buffer has been fully consumed */
- if (qp->stream->avail_in != (uint32_t)0) {
- ISAL_PMD_LOG(ERR, "Input buffer could not be read entirely\n");
- op->status = RTE_COMP_OP_STATUS_ERROR;
- return -1;
- }
+ /* Check that input buffer has been fully consumed */
+ if (qp->stream->avail_in != (uint32_t)0) {
+ ISAL_PMD_LOG(ERR, "Input buffer could not be read entirely\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return -1;
+ }
- if (ret != COMP_OK) {
- op->status = RTE_COMP_OP_STATUS_ERROR;
- return ret;
- }
+ if (ret != COMP_OK) {
+ ISAL_PMD_LOG(ERR, "Compression operation failed\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return ret;
+ }
- op->consumed = qp->stream->total_in;
- op->produced = qp->stream->total_out;
+ op->consumed = qp->stream->total_in;
+ op->produced = qp->stream->total_out;
+ }
return ret;
}
@@ -291,57 +511,72 @@ process_isal_inflate(struct rte_comp_op *op, struct isal_comp_qp *qp)
/* Initialize decompression state */
isal_inflate_init(qp->state);
- if ((op->src.length + op->src.offset) > op->m_src->data_len) {
- ISAL_PMD_LOG(ERR, "Input mbuf not big enough for offset.\n");
+ if (op->m_src->pkt_len < (op->src.length + op->src.offset)) {
+ ISAL_PMD_LOG(ERR, "Input mbuf(s) not big enough.\n");
op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
return -1;
}
- /* Point decompression state to input buffer */
- qp->state->avail_in = op->src.length;
- qp->state->next_in = rte_pktmbuf_mtod_offset(op->m_src, uint8_t *,
- op->src.offset);
- if (op->dst.offset > op->m_dst->data_len) {
- ISAL_PMD_LOG(ERR, "Output mbuf not big enough for offset.\n");
- op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ /* Chained mbufs */
+ if (op->m_src->nb_segs > 1 || op->m_dst->nb_segs > 1) {
+ ret = chained_mbuf_decompression(op, qp);
+ if (ret != 0)
+ return ret;
+ } else {
+ /* Linear buffer */
+ if ((op->src.length + op->src.offset) > op->m_src->data_len) {
+ ISAL_PMD_LOG(ERR, "Input mbuf not big enough for offset.\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
return -1;
- }
- /* Point decompression state to output buffer */
- qp->state->avail_out = op->m_dst->data_len;
- qp->state->next_out = rte_pktmbuf_mtod_offset(op->m_dst, uint8_t *,
- op->dst.offset);
+ }
+ /* Point decompression state to input buffer */
+ qp->state->avail_in = op->src.length;
+ qp->state->next_in = rte_pktmbuf_mtod_offset(op->m_src, uint8_t *,
+ op->src.offset);
+
+ if (op->dst.offset > op->m_dst->data_len) {
+ ISAL_PMD_LOG(ERR, "Output mbuf not big enough for offset.\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
+ /* Point decompression state to output buffer */
+ qp->state->avail_out = op->m_dst->data_len;
+ qp->state->next_out = rte_pktmbuf_mtod_offset(op->m_dst, uint8_t *,
+ op->dst.offset);
+
+ if (unlikely(!qp->state->next_in || !qp->state->next_out)) {
+ ISAL_PMD_LOG(ERR, "Invalid source or destination buffers\n");
+ op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
+ return -1;
+ }
- if (unlikely(!qp->state->next_in || !qp->state->next_out)) {
- ISAL_PMD_LOG(ERR, "Invalid source or destination buffers\n");
- op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
- return -1;
- }
+ /* Execute decompression operation */
+ ret = isal_inflate_stateless(qp->state);
- /* Execute decompression operation */
- ret = isal_inflate_stateless(qp->state);
+ if (ret == ISAL_OUT_OVERFLOW) {
+ ISAL_PMD_LOG(ERR, "Output buffer not big enough\n");
+ op->status = RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
+ return ret;
+ }
- if (ret == ISAL_OUT_OVERFLOW) {
- ISAL_PMD_LOG(ERR, "Output buffer not big enough\n");
- op->status = RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED;
- return ret;
- }
+ /* Check that input buffer has been fully consumed */
+ if (qp->state->avail_in != (uint32_t)0) {
+ ISAL_PMD_LOG(ERR, "Input buffer could not be read entirely\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return -1;
+ }
- /* Check that input buffer has been fully consumed */
- if (qp->state->avail_in != (uint32_t)0) {
- ISAL_PMD_LOG(ERR, "Input buffer could not be read entirely\n");
- op->status = RTE_COMP_OP_STATUS_ERROR;
- return -1;
- }
+ if (ret != ISAL_DECOMP_OK) {
+ ISAL_PMD_LOG(ERR, "Decompression operation failed\n");
+ op->status = RTE_COMP_OP_STATUS_ERROR;
+ return ret;
+ }
- if (ret != ISAL_DECOMP_OK) {
- op->status = RTE_COMP_OP_STATUS_ERROR;
- return ret;
+ op->consumed = op->src.length - qp->state->avail_in;
+ op->produced = qp->state->total_out;
}
- op->consumed = op->src.length - qp->state->avail_in;
- op->produced = qp->state->total_out;
-
-return ret;
+ return ret;
}
/* Process compression/decompression operation */
@@ -12,7 +12,10 @@
static const struct rte_compressdev_capabilities isal_pmd_capabilities[] = {
{
.algo = RTE_COMP_ALGO_DEFLATE,
- .comp_feature_flags = RTE_COMP_FF_SHAREABLE_PRIV_XFORM |
+ .comp_feature_flags = RTE_COMP_FF_OOP_SGL_IN_SGL_OUT |
+ RTE_COMP_FF_OOP_SGL_IN_LB_OUT |
+ RTE_COMP_FF_OOP_LB_IN_SGL_OUT |
+ RTE_COMP_FF_SHAREABLE_PRIV_XFORM |
RTE_COMP_FF_HUFFMAN_FIXED |
RTE_COMP_FF_HUFFMAN_DYNAMIC,
.window_size = {