[v3,3/4] ethdev: remove release function for secondary process
Checks
Commit Message
After previous changes, the function rte_eth_dev_release_port()
can be used for primary or secondary process as well.
The only difference with rte_eth_dev_release_port_secondary()
is the shared lock used in rte_eth_dev_release_port().
The function rte_eth_dev_release_port_secondary() was recently
added in 18.11 cycle.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
drivers/net/af_packet/rte_eth_af_packet.c | 2 +-
drivers/net/bonding/rte_eth_bond_pmd.c | 2 +-
drivers/net/kni/rte_eth_kni.c | 2 +-
drivers/net/null/rte_eth_null.c | 3 ---
drivers/net/octeontx/octeontx_ethdev.c | 2 +-
drivers/net/pcap/rte_eth_pcap.c | 3 ---
drivers/net/tap/rte_eth_tap.c | 2 +-
drivers/net/vhost/rte_eth_vhost.c | 2 +-
lib/librte_ethdev/rte_ethdev.c | 15 ---------------
lib/librte_ethdev/rte_ethdev_driver.h | 14 --------------
lib/librte_ethdev/rte_ethdev_pci.h | 7 -------
lib/librte_ethdev/rte_ethdev_version.map | 7 -------
12 files changed, 6 insertions(+), 55 deletions(-)
Comments
On 10/17/18 4:54 AM, Thomas Monjalon wrote:
> After previous changes, the function rte_eth_dev_release_port()
> can be used for primary or secondary process as well.
> The only difference with rte_eth_dev_release_port_secondary()
> is the shared lock used in rte_eth_dev_release_port().
>
> The function rte_eth_dev_release_port_secondary() was recently
> added in 18.11 cycle.
>
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
I really like it. Few notes below.
> diff --git a/drivers/net/null/rte_eth_null.c b/drivers/net/null/rte_eth_null.c
> index b77283ae7..c9bf15d75 100644
> --- a/drivers/net/null/rte_eth_null.c
> +++ b/drivers/net/null/rte_eth_null.c
> @@ -679,9 +679,6 @@ rte_pmd_null_remove(struct rte_vdev_device *dev)
> if (eth_dev == NULL)
> return -1;
>
> - if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> - return rte_eth_dev_release_port_secondary(eth_dev);
> -
> /* mac_addrs must not be freed alone because part of dev_private */
> eth_dev->data->mac_addrs = NULL;
I think it should be done in primary process only.
> rte_eth_dev_release_port(eth_dev);
> diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
> index 1790a8064..bfb5d710d 100644
> --- a/drivers/net/pcap/rte_eth_pcap.c
> +++ b/drivers/net/pcap/rte_eth_pcap.c
> @@ -1228,9 +1228,6 @@ pmd_pcap_remove(struct rte_vdev_device *dev)
> if (eth_dev == NULL)
> return -1;
>
> - if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> - return rte_eth_dev_release_port_secondary(eth_dev);
> -
> internals = eth_dev->data->dev_private;
> if (internals != NULL && internals->phy_mac == 0)
> /* not dynamically allocated, must not be freed */
Like above I think that assignment (which follows) should be done
in the primary process only.
17/10/2018 09:25, Andrew Rybchenko:
> On 10/17/18 4:54 AM, Thomas Monjalon wrote:
> > After previous changes, the function rte_eth_dev_release_port()
> > can be used for primary or secondary process as well.
> > The only difference with rte_eth_dev_release_port_secondary()
> > is the shared lock used in rte_eth_dev_release_port().
> >
> > The function rte_eth_dev_release_port_secondary() was recently
> > added in 18.11 cycle.
> >
> > Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
>
> I really like it. Few notes below.
>
> > diff --git a/drivers/net/null/rte_eth_null.c b/drivers/net/null/rte_eth_null.c
> > index b77283ae7..c9bf15d75 100644
> > --- a/drivers/net/null/rte_eth_null.c
> > +++ b/drivers/net/null/rte_eth_null.c
> > @@ -679,9 +679,6 @@ rte_pmd_null_remove(struct rte_vdev_device *dev)
> > if (eth_dev == NULL)
> > return -1;
> >
> > - if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> > - return rte_eth_dev_release_port_secondary(eth_dev);
> > -
> > /* mac_addrs must not be freed alone because part of dev_private */
> > eth_dev->data->mac_addrs = NULL;
>
> I think it should be done in primary process only.
>
> > rte_eth_dev_release_port(eth_dev);
> > diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
> > index 1790a8064..bfb5d710d 100644
> > --- a/drivers/net/pcap/rte_eth_pcap.c
> > +++ b/drivers/net/pcap/rte_eth_pcap.c
> > @@ -1228,9 +1228,6 @@ pmd_pcap_remove(struct rte_vdev_device *dev)
> > if (eth_dev == NULL)
> > return -1;
> >
> > - if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> > - return rte_eth_dev_release_port_secondary(eth_dev);
> > -
> > internals = eth_dev->data->dev_private;
> > if (internals != NULL && internals->phy_mac == 0)
> > /* not dynamically allocated, must not be freed */
>
> Like above I think that assignment (which follows) should be done
> in the primary process only.
I am not sure it has a real impact, because all processes are removing
the device which should be already stopped.
But OK, I will avoid changing shared data in secondary process.
@@ -990,7 +990,7 @@ rte_pmd_af_packet_remove(struct rte_vdev_device *dev)
eth_dev->data->mac_addrs = NULL;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
- return rte_eth_dev_release_port_secondary(eth_dev);
+ return rte_eth_dev_release_port(eth_dev);
internals = eth_dev->data->dev_private;
for (q = 0; q < internals->nb_queues; q++) {
@@ -3265,7 +3265,7 @@ bond_remove(struct rte_vdev_device *dev)
return -ENODEV;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
- return rte_eth_dev_release_port_secondary(eth_dev);
+ return rte_eth_dev_release_port(eth_dev);
RTE_ASSERT(eth_dev->device == &dev->device);
@@ -467,7 +467,7 @@ eth_kni_remove(struct rte_vdev_device *vdev)
eth_dev->data->mac_addrs = NULL;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
- return rte_eth_dev_release_port_secondary(eth_dev);
+ return rte_eth_dev_release_port(eth_dev);
eth_kni_dev_stop(eth_dev);
@@ -679,9 +679,6 @@ rte_pmd_null_remove(struct rte_vdev_device *dev)
if (eth_dev == NULL)
return -1;
- if (rte_eal_process_type() != RTE_PROC_PRIMARY)
- return rte_eth_dev_release_port_secondary(eth_dev);
-
/* mac_addrs must not be freed alone because part of dev_private */
eth_dev->data->mac_addrs = NULL;
rte_eth_dev_release_port(eth_dev);
@@ -1129,7 +1129,7 @@ octeontx_remove(struct rte_vdev_device *dev)
return -ENODEV;
if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
- rte_eth_dev_release_port_secondary(eth_dev);
+ rte_eth_dev_release_port(eth_dev);
continue;
}
@@ -1228,9 +1228,6 @@ pmd_pcap_remove(struct rte_vdev_device *dev)
if (eth_dev == NULL)
return -1;
- if (rte_eal_process_type() != RTE_PROC_PRIMARY)
- return rte_eth_dev_release_port_secondary(eth_dev);
-
internals = eth_dev->data->dev_private;
if (internals != NULL && internals->phy_mac == 0)
/* not dynamically allocated, must not be freed */
@@ -2082,7 +2082,7 @@ rte_pmd_tap_remove(struct rte_vdev_device *dev)
eth_dev->data->mac_addrs = NULL;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
- return rte_eth_dev_release_port_secondary(eth_dev);
+ return rte_eth_dev_release_port(eth_dev);
internals = eth_dev->data->dev_private;
@@ -1433,7 +1433,7 @@ rte_pmd_vhost_remove(struct rte_vdev_device *dev)
return -ENODEV;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
- return rte_eth_dev_release_port_secondary(eth_dev);
+ return rte_eth_dev_release_port(eth_dev);
eth_dev_close(eth_dev);
@@ -362,18 +362,6 @@ rte_eth_dev_attach_secondary(const char *name)
return eth_dev;
}
-int
-rte_eth_dev_release_port_secondary(struct rte_eth_dev *eth_dev)
-{
- if (eth_dev == NULL)
- return -EINVAL;
-
- _rte_eth_dev_callback_process(eth_dev, RTE_ETH_EVENT_DESTROY, NULL);
- eth_dev->state = RTE_ETH_DEV_UNUSED;
-
- return 0;
-}
-
int
rte_eth_dev_release_port(struct rte_eth_dev *eth_dev)
{
@@ -3591,9 +3579,6 @@ rte_eth_dev_destroy(struct rte_eth_dev *ethdev,
return ret;
}
- if (rte_eal_process_type() != RTE_PROC_PRIMARY)
- return rte_eth_dev_release_port_secondary(ethdev);
-
return rte_eth_dev_release_port(ethdev);
}
@@ -76,20 +76,6 @@ struct rte_eth_dev *rte_eth_dev_attach_secondary(const char *name);
*/
int rte_eth_dev_release_port(struct rte_eth_dev *eth_dev);
-/**
- * @internal
- * Release the specified ethdev port in the local process.
- * Only set ethdev state to unused, but not reset shared data since
- * it assume other processes is still using it. typically it is
- * called by a secondary process.
- *
- * @param eth_dev
- * Device to be detached.
- * @return
- * - 0 on success, negative on error
- */
-int rte_eth_dev_release_port_secondary(struct rte_eth_dev *eth_dev);
-
/**
* @internal
* Release device queues and clear its configuration to force the user
@@ -135,13 +135,6 @@ rte_eth_dev_pci_allocate(struct rte_pci_device *dev, size_t private_data_size)
static inline void
rte_eth_dev_pci_release(struct rte_eth_dev *eth_dev)
{
- if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
- eth_dev->device = NULL;
- eth_dev->intr_handle = NULL;
- rte_eth_dev_release_port_secondary(eth_dev);
- return;
- }
-
eth_dev->device = NULL;
eth_dev->intr_handle = NULL;
@@ -220,13 +220,6 @@ DPDK_18.08 {
} DPDK_18.05;
-DPDK_18.11 {
- global:
-
- rte_eth_dev_release_port_secondary;
-
-} DPDK_18.08;
-
EXPERIMENTAL {
global: