diff mbox series

[v5,05/13] net/mlx5: swap items/actions validations for E-Switch rules

Message ID 1541225876-8817-6-git-send-email-viacheslavo@mellanox.com (mailing list archive)
State Accepted, archived
Delegated to: Shahaf Shuler
Headers
Series net/mlx5: e-switch VXLAN encap/decap hardware offload |

Checks

Context Check Description
ci/Intel-compilation success Compilation OK

Commit Message

Slava Ovsiienko Nov. 3, 2018, 6:18 a.m. UTC 
  The rule validation function for E-Switch checks item list first,
then action list is checked. This patch swaps the validation order,
now actions are checked first. This is preparation for validation
function update with VXLAN tunnel actions. VXLAN decapsulation
action requires to check the items in special way. We could do
this special check in the single item check pass if the action
flags were gathered before. This is the reason to swap the
item/actions checking loops.

Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow_tcf.c | 261 ++++++++++++++++++++-------------------
 1 file changed, 131 insertions(+), 130 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
index 55c77e3..93a13fc 100644
--- a/drivers/net/mlx5/mlx5_flow_tcf.c
+++ b/drivers/net/mlx5/mlx5_flow_tcf.c
@@ -1174,6 +1174,137 @@  struct pedit_parser {
 	ret = flow_tcf_validate_attributes(attr, error);
 	if (ret < 0)
 		return ret;
+	for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+		unsigned int i;
+		uint64_t current_action_flag = 0;
+
+		switch (actions->type) {
+		case RTE_FLOW_ACTION_TYPE_VOID:
+			break;
+		case RTE_FLOW_ACTION_TYPE_PORT_ID:
+			current_action_flag = MLX5_FLOW_ACTION_PORT_ID;
+			if (!actions->conf)
+				break;
+			conf.port_id = actions->conf;
+			if (conf.port_id->original)
+				i = 0;
+			else
+				for (i = 0; ptoi[i].ifindex; ++i)
+					if (ptoi[i].port_id == conf.port_id->id)
+						break;
+			if (!ptoi[i].ifindex)
+				return rte_flow_error_set
+					(error, ENODEV,
+					 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+					 conf.port_id,
+					 "missing data to convert port ID to"
+					 " ifindex");
+			port_id_dev = &rte_eth_devices[conf.port_id->id];
+			break;
+		case RTE_FLOW_ACTION_TYPE_JUMP:
+			current_action_flag = MLX5_FLOW_ACTION_JUMP;
+			if (!actions->conf)
+				break;
+			conf.jump = actions->conf;
+			if (attr->group >= conf.jump->group)
+				return rte_flow_error_set
+					(error, ENOTSUP,
+					 RTE_FLOW_ERROR_TYPE_ACTION,
+					 actions,
+					 "can jump only to a group forward");
+			break;
+		case RTE_FLOW_ACTION_TYPE_DROP:
+			current_action_flag = MLX5_FLOW_ACTION_DROP;
+			break;
+		case RTE_FLOW_ACTION_TYPE_COUNT:
+			break;
+		case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
+			current_action_flag = MLX5_FLOW_ACTION_OF_POP_VLAN;
+			break;
+		case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
+			current_action_flag = MLX5_FLOW_ACTION_OF_PUSH_VLAN;
+			break;
+		case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
+			if (!(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN))
+				return rte_flow_error_set
+					(error, ENOTSUP,
+					 RTE_FLOW_ERROR_TYPE_ACTION, actions,
+					 "vlan modify is not supported,"
+					 " set action must follow push action");
+			current_action_flag = MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
+			break;
+		case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
+			if (!(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN))
+				return rte_flow_error_set
+					(error, ENOTSUP,
+					 RTE_FLOW_ERROR_TYPE_ACTION, actions,
+					 "vlan modify is not supported,"
+					 " set action must follow push action");
+			current_action_flag = MLX5_FLOW_ACTION_OF_SET_VLAN_PCP;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
+			current_action_flag = MLX5_FLOW_ACTION_SET_IPV4_SRC;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
+			current_action_flag = MLX5_FLOW_ACTION_SET_IPV4_DST;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
+			current_action_flag = MLX5_FLOW_ACTION_SET_IPV6_SRC;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
+			current_action_flag = MLX5_FLOW_ACTION_SET_IPV6_DST;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
+			current_action_flag = MLX5_FLOW_ACTION_SET_TP_SRC;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
+			current_action_flag = MLX5_FLOW_ACTION_SET_TP_DST;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_TTL:
+			current_action_flag = MLX5_FLOW_ACTION_SET_TTL;
+			break;
+		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
+			current_action_flag = MLX5_FLOW_ACTION_DEC_TTL;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
+			current_action_flag = MLX5_FLOW_ACTION_SET_MAC_SRC;
+			break;
+		case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
+			current_action_flag = MLX5_FLOW_ACTION_SET_MAC_DST;
+			break;
+		default:
+			return rte_flow_error_set(error, ENOTSUP,
+						  RTE_FLOW_ERROR_TYPE_ACTION,
+						  actions,
+						  "action not supported");
+		}
+		if (current_action_flag & MLX5_TCF_CONFIG_ACTIONS) {
+			if (!actions->conf)
+				return rte_flow_error_set
+					(error, EINVAL,
+					 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+					 actions,
+					 "action configuration not set");
+		}
+		if ((current_action_flag & MLX5_TCF_PEDIT_ACTIONS) &&
+		    pedit_validated)
+			return rte_flow_error_set(error, ENOTSUP,
+						  RTE_FLOW_ERROR_TYPE_ACTION,
+						  actions,
+						  "set actions should be "
+						  "listed successively");
+		if ((current_action_flag & ~MLX5_TCF_PEDIT_ACTIONS) &&
+		    (action_flags & MLX5_TCF_PEDIT_ACTIONS))
+			pedit_validated = 1;
+		if ((current_action_flag & MLX5_TCF_FATE_ACTIONS) &&
+		    (action_flags & MLX5_TCF_FATE_ACTIONS))
+			return rte_flow_error_set(error, EINVAL,
+						  RTE_FLOW_ERROR_TYPE_ACTION,
+						  actions,
+						  "can't have multiple fate"
+						  " actions");
+		action_flags |= current_action_flag;
+	}
 	for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
 		unsigned int i;
 
@@ -1375,136 +1506,6 @@  struct pedit_parser {
 						  NULL, "item not supported");
 		}
 	}
-	for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
-		unsigned int i;
-		uint64_t current_action_flag = 0;
-
-		switch (actions->type) {
-		case RTE_FLOW_ACTION_TYPE_VOID:
-			break;
-		case RTE_FLOW_ACTION_TYPE_PORT_ID:
-			current_action_flag = MLX5_FLOW_ACTION_PORT_ID;
-			if (!actions->conf)
-				break;
-			conf.port_id = actions->conf;
-			if (conf.port_id->original)
-				i = 0;
-			else
-				for (i = 0; ptoi[i].ifindex; ++i)
-					if (ptoi[i].port_id == conf.port_id->id)
-						break;
-			if (!ptoi[i].ifindex)
-				return rte_flow_error_set
-					(error, ENODEV,
-					 RTE_FLOW_ERROR_TYPE_ACTION_CONF,
-					 conf.port_id,
-					 "missing data to convert port ID to"
-					 " ifindex");
-			port_id_dev = &rte_eth_devices[conf.port_id->id];
-			break;
-		case RTE_FLOW_ACTION_TYPE_JUMP:
-			current_action_flag = MLX5_FLOW_ACTION_JUMP;
-			if (!actions->conf)
-				break;
-			conf.jump = actions->conf;
-			if (attr->group >= conf.jump->group)
-				return rte_flow_error_set
-					(error, ENOTSUP,
-					 RTE_FLOW_ERROR_TYPE_ACTION,
-					 actions,
-					 "can jump only to a group forward");
-			break;
-		case RTE_FLOW_ACTION_TYPE_DROP:
-			current_action_flag = MLX5_FLOW_ACTION_DROP;
-			break;
-		case RTE_FLOW_ACTION_TYPE_COUNT:
-			break;
-		case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
-			current_action_flag = MLX5_FLOW_ACTION_OF_POP_VLAN;
-			break;
-		case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
-			current_action_flag = MLX5_FLOW_ACTION_OF_PUSH_VLAN;
-			break;
-		case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
-			if (!(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN))
-				return rte_flow_error_set
-					(error, ENOTSUP,
-					 RTE_FLOW_ERROR_TYPE_ACTION, actions,
-					 "vlan modify is not supported,"
-					 " set action must follow push action");
-			current_action_flag = MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
-			break;
-		case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
-			if (!(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN))
-				return rte_flow_error_set
-					(error, ENOTSUP,
-					 RTE_FLOW_ERROR_TYPE_ACTION, actions,
-					 "vlan modify is not supported,"
-					 " set action must follow push action");
-			current_action_flag = MLX5_FLOW_ACTION_OF_SET_VLAN_PCP;
-			break;
-		case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
-			current_action_flag = MLX5_FLOW_ACTION_SET_IPV4_SRC;
-			break;
-		case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
-			current_action_flag = MLX5_FLOW_ACTION_SET_IPV4_DST;
-			break;
-		case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
-			current_action_flag = MLX5_FLOW_ACTION_SET_IPV6_SRC;
-			break;
-		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
-			current_action_flag = MLX5_FLOW_ACTION_SET_IPV6_DST;
-			break;
-		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
-			current_action_flag = MLX5_FLOW_ACTION_SET_TP_SRC;
-			break;
-		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
-			current_action_flag = MLX5_FLOW_ACTION_SET_TP_DST;
-			break;
-		case RTE_FLOW_ACTION_TYPE_SET_TTL:
-			current_action_flag = MLX5_FLOW_ACTION_SET_TTL;
-			break;
-		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
-			current_action_flag = MLX5_FLOW_ACTION_DEC_TTL;
-			break;
-		case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
-			current_action_flag = MLX5_FLOW_ACTION_SET_MAC_SRC;
-			break;
-		case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
-			current_action_flag = MLX5_FLOW_ACTION_SET_MAC_DST;
-			break;
-		default:
-			return rte_flow_error_set(error, ENOTSUP,
-						  RTE_FLOW_ERROR_TYPE_ACTION,
-						  actions,
-						  "action not supported");
-		}
-		if (current_action_flag & MLX5_TCF_CONFIG_ACTIONS) {
-			if (!actions->conf)
-				return rte_flow_error_set(error, EINVAL,
-						RTE_FLOW_ERROR_TYPE_ACTION_CONF,
-						actions,
-						"action configuration not set");
-		}
-		if ((current_action_flag & MLX5_TCF_PEDIT_ACTIONS) &&
-		    pedit_validated)
-			return rte_flow_error_set(error, ENOTSUP,
-						  RTE_FLOW_ERROR_TYPE_ACTION,
-						  actions,
-						  "set actions should be "
-						  "listed successively");
-		if ((current_action_flag & ~MLX5_TCF_PEDIT_ACTIONS) &&
-		    (action_flags & MLX5_TCF_PEDIT_ACTIONS))
-			pedit_validated = 1;
-		if ((current_action_flag & MLX5_TCF_FATE_ACTIONS) &&
-		    (action_flags & MLX5_TCF_FATE_ACTIONS))
-			return rte_flow_error_set(error, EINVAL,
-						  RTE_FLOW_ERROR_TYPE_ACTION,
-						  actions,
-						  "can't have multiple fate"
-						  " actions");
-		action_flags |= current_action_flag;
-	}
 	if ((action_flags & MLX5_TCF_PEDIT_ACTIONS) &&
 	    (action_flags & MLX5_FLOW_ACTION_DROP))
 		return rte_flow_error_set(error, ENOTSUP,