diff mbox series

[v3,1/2] net/ixgbe: do not start on unsupported loopback mode

Message ID 20190220210531.48322-1-julien.meunier@nokia.com (mailing list archive)
State Accepted, archived
Delegated to: Qi Zhang
Headers
Series [v3,1/2] net/ixgbe: do not start on unsupported loopback mode |

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/mellanox-Performance-Testing success Performance Testing PASS
ci/intel-Performance-Testing success Performance Testing PASS
ci/Intel-compilation success Compilation OK

Commit Message

Julien Meunier Feb. 20, 2019, 9:05 p.m. UTC 
  Only TX->RX loopback is supported currently on 82599EB. If a user wants
to apply an another loopback configuration (!= IXGBE_LPBK_82599_TX_RX),
ixgbe PMD ignores it and continues the configuration without raising any
error.

Let's robustify this part by checking if the requested loopback mode is
correct for the current device, before starting it. If it is not valid,
PMD will refuse to start.

Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
---
v3:
- code style + checkpatch compliance

v2:
- factorize code
- check if loopback is really supported
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 14 ++++++++++----
 drivers/net/ixgbe/ixgbe_rxtx.c   | 37 +++++++++++++++++++++++++++++--------
 drivers/net/ixgbe/ixgbe_rxtx.h   |  1 +
 3 files changed, 40 insertions(+), 12 deletions(-)

Comments

Qi Zhang March 1, 2019, 7:45 a.m. UTC | #1 
> -----Original Message-----
> From: Julien Meunier [mailto:julien.meunier@nokia.com]
> Sent: Thursday, February 21, 2019 5:05 AM
> To: Zhao1, Wei <wei.zhao1@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com>; Lu,
> Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin
> <konstantin.ananyev@intel.com>
> Cc: dev@dpdk.org
> Subject: [PATCH v3 1/2] net/ixgbe: do not start on unsupported loopback mode
> 
> Only TX->RX loopback is supported currently on 82599EB. If a user wants to apply
> an another loopback configuration (!= IXGBE_LPBK_82599_TX_RX), ixgbe PMD
> ignores it and continues the configuration without raising any error.
> 
> Let's robustify this part by checking if the requested loopback mode is correct for
> the current device, before starting it. If it is not valid, PMD will refuse to start.
> 
> Signed-off-by: Julien Meunier <julien.meunier@nokia.com>

Acked-by: Wei Zhao <wei.zhao1@intel.com>

Applied to dpdk-next-net-intel.

Thanks
Qi
diff mbox series

Patch

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 7493110..4deedb0 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -2652,10 +2652,16 @@  ixgbe_dev_start(struct rte_eth_dev *dev)
 		goto error;
 	}
 
-	/* Skip link setup if loopback mode is enabled for 82599. */
-	if (hw->mac.type == ixgbe_mac_82599EB &&
-			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
-		goto skip_link_setup;
+	/* Skip link setup if loopback mode is enabled. */
+	if (dev->data->dev_conf.lpbk_mode != 0) {
+		err = ixgbe_check_supported_loopback_mode(dev);
+		if (err < 0) {
+			PMD_INIT_LOG(ERR, "Unsupported loopback mode");
+			goto error;
+		} else {
+			goto skip_link_setup;
+		}
+	}
 
 	if (ixgbe_is_sfp(hw) && hw->phy.multispeed_fiber) {
 		err = hw->mac.ops.setup_sfp(hw);
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index 9a79d18..c9a70a8 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -4879,13 +4879,18 @@  ixgbe_dev_rx_init(struct rte_eth_dev *dev)
 		hlreg0 &= ~IXGBE_HLREG0_JUMBOEN;
 
 	/*
-	 * If loopback mode is configured for 82599, set LPBK bit.
+	 * If loopback mode is configured, set LPBK bit.
 	 */
-	if (hw->mac.type == ixgbe_mac_82599EB &&
-			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
+	if (dev->data->dev_conf.lpbk_mode != 0) {
+		rc = ixgbe_check_supported_loopback_mode(dev);
+		if (rc < 0) {
+			PMD_INIT_LOG(ERR, "Unsupported loopback mode");
+			return rc;
+		}
 		hlreg0 |= IXGBE_HLREG0_LPBK;
-	else
+	} else {
 		hlreg0 &= ~IXGBE_HLREG0_LPBK;
+	}
 
 	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
 
@@ -5062,6 +5067,21 @@  ixgbe_dev_tx_init(struct rte_eth_dev *dev)
 }
 
 /*
+ * Check if requested loopback mode is supported
+ */
+int
+ixgbe_check_supported_loopback_mode(struct rte_eth_dev *dev)
+{
+	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
+		if (hw->mac.type == ixgbe_mac_82599EB)
+			return 0;
+
+	return -ENOTSUP;
+}
+
+/*
  * Set up link for 82599 loopback mode Tx->Rx.
  */
 static inline void __attribute__((cold))
@@ -5148,10 +5168,11 @@  ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
 	rxctrl |= IXGBE_RXCTRL_RXEN;
 	hw->mac.ops.enable_rx_dma(hw, rxctrl);
 
-	/* If loopback mode is enabled for 82599, set up the link accordingly */
-	if (hw->mac.type == ixgbe_mac_82599EB &&
-			dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
-		ixgbe_setup_loopback_link_82599(hw);
+	/* If loopback mode is enabled, set up the link accordingly */
+	if (dev->data->dev_conf.lpbk_mode != 0) {
+		if (hw->mac.type == ixgbe_mac_82599EB)
+			ixgbe_setup_loopback_link_82599(hw);
+	}
 
 #ifdef RTE_LIBRTE_SECURITY
 	if ((dev->data->dev_conf.rxmode.offloads &
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h
index 39378f7..505d344 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.h
+++ b/drivers/net/ixgbe/ixgbe_rxtx.h
@@ -276,6 +276,7 @@  void ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq);
  */
 void ixgbe_set_rx_function(struct rte_eth_dev *dev);
 
+int ixgbe_check_supported_loopback_mode(struct rte_eth_dev *dev);
 uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
 		uint16_t nb_pkts);
 uint16_t ixgbe_recv_scattered_pkts_vec(void *rx_queue,