@@ -23,7 +23,7 @@ def kill(process):
if "RTE_TARGET" in os.environ:
dpdk_target = os.environ["RTE_TARGET"]
else:
- dpdk_target = "x86_64-native-linuxapp-gcc"
+ dpdk_target = "x86_64-native-linux-gcc"
parser = argparse.ArgumentParser(
description='BBdev Unit Test Application',
@@ -38,7 +38,7 @@ def usage():
# how many workers to run tests with. FreeBSD doesn't support multiple primary
# processes, so make it 1, otherwise make it 4. ignored for non-parallel tests
-n_processes = 1 if "bsdapp" in target else 4
+n_processes = 1 if "bsd" in target else 4
runner = autotest_runner.AutotestRunner(cmdline, target, test_blacklist,
test_whitelist, n_processes)
@@ -36,7 +36,7 @@ extern cmdline_parse_ctx_t main_ctx[];
const char *prgname; /* to be set to argv[0] */
-static const char *recursive_call; /* used in linuxapp for MP and other tests */
+static const char *recursive_call; /* used in linux for MP and other tests */
static int
no_action(void){ return 0; }
similarity index 97%
rename from config/common_armv8a_linuxapp
rename to config/common_armv8a_linux
@@ -2,7 +2,7 @@
# Copyright(c) 2017 Cavium, Inc
#
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="armv8a"
similarity index 100%
rename from config/common_bsdapp
rename to config/common_freebsd
similarity index 100%
rename from config/common_linuxapp
rename to config/common_linux
new file mode 120000
@@ -0,0 +1 @@
+defconfig_arm-armv7a-linuxapp-gcc
\ No newline at end of file
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright (C) 2015 RehiveTech. All right reserved.
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="armv7a"
new file mode 120000
@@ -0,0 +1 @@
+defconfig_arm64-armv8a-linuxapp-clang
\ No newline at end of file
new file mode 120000
@@ -0,0 +1 @@
+defconfig_arm64-armv8a-linuxapp-gcc
\ No newline at end of file
@@ -2,7 +2,7 @@
# Copyright(c) 2017 Cavium, Inc
#
-#include "common_armv8a_linuxapp"
+#include "common_armv8a_linux"
CONFIG_RTE_TOOLCHAIN="clang"
CONFIG_RTE_TOOLCHAIN_CLANG=y
@@ -2,7 +2,7 @@
# Copyright(c) 2015 Cavium, Inc
#
-#include "common_armv8a_linuxapp"
+#include "common_armv8a_linux"
CONFIG_RTE_TOOLCHAIN="gcc"
CONFIG_RTE_TOOLCHAIN_GCC=y
new file mode 120000
@@ -0,0 +1 @@
+defconfig_arm64-bluefield-linuxapp-gcc
\ No newline at end of file
@@ -2,7 +2,7 @@
# Copyright 2019 Mellanox Technologies, Ltd
#
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
# Mellanox BlueField
CONFIG_RTE_ARCH_ARM_TUNE="cortex-a72"
new file mode 120000
@@ -0,0 +1 @@
+defconfig_arm64-dpaa-linuxapp-gcc
\ No newline at end of file
@@ -2,7 +2,7 @@
# Copyright 2016 Freescale Semiconductor, Inc.
# Copyright 2017 NXP
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
# NXP (Freescale) - Soc Architecture with FMAN, QMAN & BMAN support
CONFIG_RTE_MACHINE="dpaa"
new file mode 120000
@@ -0,0 +1 @@
+defconfig_arm64-dpaa2-linuxapp-gcc
\ No newline at end of file
@@ -3,7 +3,7 @@
# Copyright 2016 NXP
#
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
# NXP (Freescale) - Soc Architecture with WRIOP and QBMAN support
CONFIG_RTE_MACHINE="dpaa2"
new file mode 120000
@@ -0,0 +1 @@
+defconfig_arm64-stingray-linuxapp-gcc
\ No newline at end of file
@@ -2,7 +2,7 @@
# Copyright (C) Broadcom 2017-2018. All rights reserved.
#
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
# Broadcom - Stingray
CONFIG_RTE_MACHINE="armv8a"
new file mode 120000
@@ -0,0 +1 @@
+defconfig_arm64-thunderx-linuxapp-gcc
\ No newline at end of file
@@ -2,7 +2,7 @@
# Copyright(c) 2015 Cavium, Inc
#
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
CONFIG_RTE_MACHINE="thunderx"
new file mode 120000
@@ -0,0 +1 @@
+defconfig_arm64-xgene1-linuxapp-gcc
\ No newline at end of file
@@ -2,7 +2,7 @@
# Copyright(c) 2015 Cavium, Inc
#
-#include "defconfig_arm64-armv8a-linuxapp-gcc"
+#include "defconfig_arm64-armv8a-linux-gcc"
CONFIG_RTE_MACHINE="xgene1"
CONFIG_RTE_CACHE_LINE_SIZE=64
new file mode 120000
@@ -0,0 +1 @@
+defconfig_i686-native-linuxapp-gcc
\ No newline at end of file
new file mode 120000
@@ -0,0 +1 @@
+defconfig_i686-native-linuxapp-icc
\ No newline at end of file
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
new file mode 120000
@@ -0,0 +1 @@
+defconfig_ppc_64-power8-linuxapp-gcc
\ No newline at end of file
@@ -28,7 +28,7 @@
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="power8"
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_bsdapp"
+#include "common_freebsd"
CONFIG_RTE_MACHINE="native"
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_bsdapp"
+#include "common_freebsd"
CONFIG_RTE_MACHINE="native"
new file mode 120000
@@ -0,0 +1 @@
+defconfig_x86_64-native-bsdapp-clang
\ No newline at end of file
new file mode 120000
@@ -0,0 +1 @@
+defconfig_x86_64-native-bsdapp-gcc
\ No newline at end of file
new file mode 120000
@@ -0,0 +1 @@
+defconfig_x86_64-native-linuxapp-clang
\ No newline at end of file
new file mode 120000
@@ -0,0 +1 @@
+defconfig_x86_64-native-linuxapp-gcc
\ No newline at end of file
new file mode 120000
@@ -0,0 +1 @@
+defconfig_x86_64-native-linuxapp-icc
\ No newline at end of file
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
new file mode 120000
@@ -0,0 +1 @@
+defconfig_x86_x32-native-linuxapp-gcc
\ No newline at end of file
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2014 Intel Corporation
-#include "common_linuxapp"
+#include "common_linux"
CONFIG_RTE_MACHINE="native"
@@ -40,8 +40,8 @@ ignore="( -name .svn -o -name CVS -o -name .hg -o -name .git ) -prune -o"
source_dirs="app buildtools drivers examples lib"
-skip_bsd="( -name bsdapp ) -prune -o"
-skip_linux="( -name linuxapp ) -prune -o"
+skip_bsd="( -name freebsd ) -prune -o"
+skip_linux="( -name linux ) -prune -o"
skip_arch="( -name arch ) -prune -o"
skip_sse="( -name *_sse*.[chS] ) -prune -o"
skip_avx="( -name *_avx*.[chS] ) -prune -o"
@@ -146,8 +146,8 @@ check_valid_target()
if [ -n "$2" ]; then
check_valid_target $2
- echo $2 | grep -q "linuxapp-" || linux=false
- echo $2 | grep -q "bsdapp-" || bsd=false
+ echo $2 | grep -q "linux" || linux=false
+ echo $2 | grep -q "bsd" || bsd=false
echo $2 | grep -q "x86_64-" || x86_64=false
echo $2 | grep -q "arm-" || arm_32=false
echo $2 | grep -q "arm64-" || arm_64=false
@@ -46,7 +46,7 @@ print_help () {
-v verbose build
config: defconfig[[~][+]option1[[~][+]option2...]]
- Example: x86_64-native-linuxapp-gcc+debug~RXTX_CALLBACKS
+ Example: x86_64-native-linux-gcc+debug~RXTX_CALLBACKS
The lowercase options are defined inside $(basename $0).
The uppercase options can be the end of a defconfig option
to enable if prefixed with '+' or to disable if prefixed with '~'.
@@ -9,7 +9,7 @@ set -e
abicheck=abi-compliance-checker
abidump=abi-dumper
default_dst=abi-check
-default_target=x86_64-native-linuxapp-gcc
+default_target=x86_64-native-linux-gcc
# trap on error
err_report() {
@@ -1,7 +1,7 @@
Basic build
make defconfig && make
or
- make config T=x86_64-native-linuxapp-gcc && make
+ make config T=x86_64-native-linux-gcc && make
Build commands
config get configuration from target template (T=)
defconfig auto-select target template based on arch, OS, etc.
@@ -68,7 +68,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-thunderx-linuxapp-gcc install
+ make config T=arm64-thunderx-linux-gcc install
Initialization
@@ -97,7 +97,7 @@ probed. To use the PMD in an application, user must:
reserve enough huge pages
cd to the top-level DPDK directory
- export RTE_TARGET=arm64-thunderx-linuxapp-gcc
+ export RTE_TARGET=arm64-thunderx-linux-gcc
export RTE_SDK=`pwd`
cd to app/test
type the command "make" to compile
@@ -7,12 +7,12 @@ Design
Environment or Architecture-specific Sources
--------------------------------------------
-In DPDK and DPDK applications, some code is specific to an architecture (i686, x86_64) or to an executive environment (bsdapp or linuxapp) and so on.
+In DPDK and DPDK applications, some code is specific to an architecture (i686, x86_64) or to an executive environment (freebsd or linux) and so on.
As far as is possible, all such instances of architecture or env-specific code should be provided via standard APIs in the EAL.
By convention, a file is common if it is not located in a directory indicating that it is specific.
For instance, a file located in a subdir of "x86_64" directory is specific to this architecture.
-A file located in a subdir of "linuxapp" is specific to this execution environment.
+A file located in a subdir of "linux" is specific to this execution environment.
.. note::
@@ -81,7 +81,7 @@ are collected for any instance of any object type provided by the library:
.. code-block:: console
- # DPDK file config/common_linuxapp, config/common_bsdapp, etc.
+ # DPDK file config/common_linux, config/common_freebsd, etc.
CONFIG_RTE_<LIBRARY_NAME>_STATS_COLLECT=y/n
The default value for this DPDK configuration file variable (either "yes" or
@@ -437,7 +437,7 @@ Makefile System
Compilation of patches and changes should be tested using the ``test-build.sh`` script in the ``devtools``
directory of the DPDK repo::
- devtools/test-build.sh x86_64-native-linuxapp-gcc+next+shared
+ devtools/test-build.sh x86_64-native-linux-gcc+next+shared
The script usage is::
@@ -452,9 +452,9 @@ Where:
Examples of configs are::
- x86_64-native-linuxapp-gcc
- x86_64-native-linuxapp-gcc+next+shared
- x86_64-native-linuxapp-clang+shared
+ x86_64-native-linux-gcc
+ x86_64-native-linux-gcc+next+shared
+ x86_64-native-linux-clang+shared
The builds can be modified via the following environmental variables:
@@ -468,9 +468,9 @@ These can be set from the command line or in the config files shown above in the
The recommended configurations and options to test compilation prior to submitting patches are::
- x86_64-native-linuxapp-gcc+shared+next
- x86_64-native-linuxapp-clang+shared
- i686-native-linuxapp-gcc
+ x86_64-native-linux-gcc+shared+next
+ x86_64-native-linux-clang+shared
+ i686-native-linux-gcc
export DPDK_DEP_ZLIB=y
export DPDK_DEP_PCAP=y
@@ -557,13 +557,13 @@ on the local repo and target is the usual DPDK compilation target.
For example::
# Check between the previous and latest commit:
- ./devtools/validate-abi.sh HEAD~1 HEAD x86_64-native-linuxapp-gcc
+ ./devtools/validate-abi.sh HEAD~1 HEAD x86_64-native-linux-gcc
# Check between two tags:
- ./devtools/validate-abi.sh v2.0.0 v2.1.0 x86_64-native-linuxapp-gcc
+ ./devtools/validate-abi.sh v2.0.0 v2.1.0 x86_64-native-linux-gcc
# Check between git master and local topic-branch "vhost-hacking":
- ./devtools/validate-abi.sh master vhost-hacking x86_64-native-linuxapp-gcc
+ ./devtools/validate-abi.sh master vhost-hacking x86_64-native-linux-gcc
After the validation script completes (it can take a while since it need to
compile both tags) it will create compatibility reports in the
@@ -42,7 +42,7 @@ In order to enable this virtual crypto PMD, user must:
make -C $ARMV8_CRYPTO_LIB_PATH/
* Set CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=y in
- config/defconfig_arm64-armv8a-linuxapp-gcc
+ config/defconfig_arm64-armv8a-linux-gcc
The corresponding device can be created only if the following features
are supported by the CPU:
@@ -121,14 +121,14 @@ to enable caam_jr PMD.
Please note that enabling debugging options may affect system performance.
* ``CONFIG_RTE_LIBRTE_PMD_CAAM_JR`` (default ``n``)
- By default it is only enabled in common_linuxapp config.
+ By default it is only enabled in common_linux config.
Toggle compilation of the ``librte_pmd_caam_jr`` driver.
* ``CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE`` (default ``n``)
By default it is disabled.
It can be used when the underlying hardware supports the CAAM in BE mode.
e.g. LS1043A, LS1046A supports CAAM in BE mode.
- BE mode is enabled by default in defconfig-arm64-dpaa-linuxapp-gcc.
+ BE mode is enabled by default in defconfig-arm64-dpaa-linux-gcc.
Installations
-------------
@@ -138,7 +138,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-armv8a-linuxapp-gcc install
+ make config T=arm64-armv8a-linux-gcc install
Enabling logs
-------------
@@ -191,7 +191,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa2-linuxapp-gcc install
+ make config T=arm64-dpaa2-linux-gcc install
Enabling logs
-------------
@@ -131,7 +131,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa-linuxapp-gcc install
+ make config T=arm64-dpaa-linux-gcc install
Enabling logs
-------------
@@ -67,7 +67,7 @@ For Ubuntu 14.04 LTS these packages have to be installed in the build system:
.. code-block:: console
sudo apt-get install openssl
- sudo apt-get install libc6-dev-i386 # for i686-native-linuxapp-gcc target
+ sudo apt-get install libc6-dev-i386 # for i686-native-linux-gcc target
This code was also verified on Fedora 24.
This code has NOT been verified on FreeBSD yet.
@@ -79,8 +79,8 @@ Finally the front-end virtio crypto PMD driver can be installed:
cd to the top-level DPDK directory
sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO\)=n,\1=y,' config/common_base
- make config T=x86_64-native-linuxapp-gcc
- make install T=x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc
+ make install T=x86_64-native-linux-gcc
Tests
-----
@@ -91,7 +91,7 @@ The unit test cases can be tested as below:
reserve enough huge pages
cd to the top-level DPDK directory
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
export RTE_SDK=`pwd`
cd to app/test
type the command "make" to compile
@@ -104,7 +104,7 @@ The performance can be tested as below:
reserve enough huge pages
cd to the top-level DPDK directory
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
export RTE_SDK=`pwd`
cd to app/test-crypto-perf
type the command "make" to compile
@@ -62,7 +62,7 @@ In order to enable this virtual crypto PMD, user must:
.. code-block:: console
- make config T=x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc
sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_ZUC\)=n,\1=y,' build/.config
make
@@ -62,7 +62,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa-linuxapp-gcc install
+ make config T=arm64-dpaa-linux-gcc install
Initialization
--------------
@@ -71,7 +71,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa2-linuxapp-gcc install
+ make config T=arm64-dpaa2-linux-gcc install
Initialization
--------------
@@ -63,7 +63,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-thunderx-linuxapp-gcc install
+ make config T=arm64-thunderx-linux-gcc install
Initialization
@@ -107,7 +107,7 @@ Where:
* ``MACHINE`` is: ``native``
-* ``EXECENV`` is: ``bsdapp``
+* ``EXECENV`` is: ``freebsd``
* ``TOOLCHAIN`` is: ``gcc`` | ``clang``
@@ -130,7 +130,7 @@ For example to compile for FreeBSD use:
.. code-block:: console
- gmake install T=x86_64-native-bsdapp-clang
+ gmake install T=x86_64-native-freebsd-clang
.. note::
@@ -208,7 +208,7 @@ An error such as:
.. code-block:: console
- kldload: can't load ./x86_64-native-bsdapp-gcc/kmod/contigmem.ko:
+ kldload: can't load ./x86_64-native-freebsd-gcc/kmod/contigmem.ko:
Exec format error
is generally attributed to not having enough contiguous memory
@@ -13,7 +13,7 @@ Compiling a Sample Application
------------------------------
Once a DPDK target environment directory has been created (such as
-``x86_64-native-bsdapp-clang``), it contains all libraries and header files required
+``x86_64-native-freebsd-clang``), it contains all libraries and header files required
to build an application.
When compiling an application in the FreeBSD environment on the DPDK,
@@ -22,8 +22,8 @@ the following variables must be exported:
* ``RTE_SDK`` - Points to the DPDK installation directory.
* ``RTE_TARGET`` - Points to the DPDK target environment directory.
- For FreeBSD, this is the ``x86_64-native-bsdapp-clang`` or
- ``x86_64-native-bsdapp-gcc`` directory.
+ For FreeBSD, this is the ``x86_64-native-freebsd-clang`` or
+ ``x86_64-native-freebsd-gcc`` directory.
The following is an example of creating the ``helloworld`` application, which runs
in the DPDK FreeBSD environment. While the example demonstrates compiling
@@ -43,7 +43,7 @@ in the build directory.
cd $(RTE_SDK)
cd examples/helloworld/
setenv RTE_SDK $HOME/DPDK
- setenv RTE_TARGET x86_64-native-bsdapp-gcc
+ setenv RTE_TARGET x86_64-native-freebsd-gcc
gmake CC=gcc49
CC main.o
@@ -67,7 +67,7 @@ in the build directory.
setenv RTE_SDK /home/user/DPDK
cp -r $(RTE_SDK)/examples/helloworld my_rte_app
cd my_rte_app/
- setenv RTE_TARGET x86_64-native-bsdapp-gcc
+ setenv RTE_TARGET x86_64-native-freebsd-gcc
gmake CC=gcc49
CC main.o
@@ -57,7 +57,7 @@ environmental variables should be set as below:
* ``RTE_SDK=/usr/local/share/dpdk``
-* ``RTE_TARGET=x86_64-native-bsdapp-clang``
+* ``RTE_TARGET=x86_64-native-freebsd-clang``
.. note::
@@ -72,7 +72,7 @@ compiled and run as below:
export RTE_SDK=/usr/local/share/dpdk
- export RTE_TARGET=x86_64-native-bsdapp-clang
+ export RTE_TARGET=x86_64-native-freebsd-clang
cp -r /usr/local/share/dpdk/examples/helloworld .
@@ -7,7 +7,7 @@ Introduction
This document contains instructions for installing and configuring the
Data Plane Development Kit (DPDK) software. It is designed to get customers
up and running quickly and describes how to compile and run a
-DPDK application in a FreeBSD application (bsdapp) environment, without going
+DPDK application in a FreeBSD application (freebsd) environment, without going
deeply into detail.
For a comprehensive guide to installing and using FreeBSD, the following
@@ -37,7 +37,7 @@ The following is a list of DPDK documents in the suggested reading order:
* **Programmer's Guide**: Describes:
* The software architecture and how to use it (through examples),
- specifically in a Linux* application (linuxapp) environment
+ specifically in a Linux* application (linux) environment
* The content of the DPDK, the build system (including the commands
that can be used in the root DPDK Makefile to build the development
@@ -591,7 +591,7 @@ Set up DPDK in the Virtual Machine
rmmod virtio-pci ixgbevf
modprobe uio
- insmod /root/dpdk/x86_64-default-linuxapp-gcc/kmod/igb_uio.ko
+ insmod /root/dpdk/x86_64-default-linux-gcc/kmod/igb_uio.ko
/root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:03.0
/root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:04.0
@@ -613,7 +613,7 @@ Run testpmd in the Virtual Machine.
# use for bonding of virtio and vf tests in VM
- /root/dpdk/x86_64-default-linuxapp-gcc/app/testpmd \
+ /root/dpdk/x86_64-default-linux-gcc/app/testpmd \
-l 0-3 -n 4 --socket-mem 350 -- --i --port-topology=chained
.. _lm_bond_virtio_sriov_switch_conf:
@@ -421,7 +421,7 @@ setup_dpdk_virtio_in_vm.sh
rmmod virtio-pci
modprobe uio
- insmod /root/dpdk/x86_64-default-linuxapp-gcc/kmod/igb_uio.ko
+ insmod /root/dpdk/x86_64-default-linux-gcc/kmod/igb_uio.ko
/root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:03.0
/root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:04.0
@@ -437,5 +437,5 @@ run_testpmd_in_vm.sh
# Run testpmd for use with vhost_user sample app.
# test system has 8 cpus (0-7), use cpus 2-7 for VM
- /root/dpdk/x86_64-default-linuxapp-gcc/app/testpmd \
+ /root/dpdk/x86_64-default-linux-gcc/app/testpmd \
-l 0-5 -n 4 --socket-mem 350 -- --burst=64 --i
@@ -132,7 +132,7 @@ Build DPDK:
git clone git://dpdk.org/dpdk
cd dpdk
export RTE_SDK=$PWD
- make install T=x86_64-native-linuxapp-gcc DESTDIR=install
+ make install T=x86_64-native-linux-gcc DESTDIR=install
Testpmd launch
@@ -346,7 +346,7 @@ Build DPDK:
git clone git://dpdk.org/dpdk
cd dpdk
export RTE_SDK=$PWD
- make install T=x86_64-native-linuxapp-gcc DESTDIR=install
+ make install T=x86_64-native-linux-gcc DESTDIR=install
Testpmd launch
@@ -60,7 +60,7 @@ some minor changes.
.. code-block:: console
- make install RTE_SDK=`pwd` T=x86_64-native-linuxapp-gcc
+ make install RTE_SDK=`pwd` T=x86_64-native-linux-gcc
#. Write a Dockerfile like below.
@@ -70,7 +70,7 @@ some minor changes.
FROM ubuntu:latest
WORKDIR /usr/src/dpdk
COPY . /usr/src/dpdk
- ENV PATH "$PATH:/usr/src/dpdk/x86_64-native-linuxapp-gcc/app/"
+ ENV PATH "$PATH:/usr/src/dpdk/x86_64-native-linux-gcc/app/"
EOT
#. Build a Docker image.
@@ -46,7 +46,7 @@ where:
* ``MACHINE`` can be: ``native``, ``power8``, ``armv8a``
-* ``EXECENV`` can be: ``linuxapp``, ``bsdapp``
+* ``EXECENV`` can be: ``linux``, ``freebsd``
* ``TOOLCHAIN`` can be: ``gcc``, ``icc``
@@ -76,20 +76,20 @@ For example, to compile a 64-bit target using icc, run:
.. code-block:: console
- make install T=x86_64-native-linuxapp-icc
+ make install T=x86_64-native-linux-icc
To compile a 32-bit build using gcc, the make command should be:
.. code-block:: console
- make install T=i686-native-linuxapp-gcc
+ make install T=i686-native-linux-gcc
To prepare a target without building it, for example, if the configuration changes need to be made before compilation,
use the ``make config T=<target>`` command:
.. code-block:: console
- make config T=x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc
.. warning::
@@ -104,7 +104,7 @@ The user may also make modifications to the compile-time DPDK configuration by e
.. code-block:: console
- cd x86_64-native-linuxapp-gcc
+ cd x86_64-native-linux-gcc
vi .config
make
@@ -15,7 +15,7 @@ It also provides a pointer to where sample applications are stored.
Compiling a Sample Application
------------------------------
-Once an DPDK target environment directory has been created (such as ``x86_64-native-linuxapp-gcc``),
+Once an DPDK target environment directory has been created (such as ``x86_64-native-linux-gcc``),
it contains all libraries and header files required to build an application.
When compiling an application in the Linux* environment on the DPDK, the following variables must be exported:
@@ -36,7 +36,7 @@ By default, the binary is generated in the build directory.
cd examples/helloworld/
export RTE_SDK=$HOME/DPDK
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
make
CC main.o
@@ -58,7 +58,7 @@ By default, the binary is generated in the build directory.
export RTE_SDK=/home/user/DPDK
cp -r $(RTE_SDK)/examples/helloworld my_rte_app
cd my_rte_app/
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
make
CC main.o
@@ -76,11 +76,11 @@ Copy the NUMA header files and lib to the cross compiler's directories:
Configure and cross compile DPDK Build
--------------------------------------
-To configure a build, choose one of the target configurations, like arm64-dpaa2-linuxapp-gcc and arm64-thunderx-linuxapp-gcc.
+To configure a build, choose one of the target configurations, like arm64-dpaa2-linux-gcc and arm64-thunderx-linux-gcc.
.. code-block:: console
- make config T=arm64-armv8a-linuxapp-gcc
+ make config T=arm64-armv8a-linux-gcc
To cross-compile, without compiling the kernel modules, use the following command:
@@ -128,5 +128,5 @@ command::
For example if the target machine is arm64 we can use the following
command::
- meson arm64-build --cross-file config/arm/arm64_armv8_linuxapp_gcc
+ meson arm64-build --cross-file config/arm/arm64_armv8_linux_gcc
ninja -C arm64-build
@@ -6,7 +6,7 @@ Introduction
This document contains instructions for installing and configuring the Data Plane Development Kit (DPDK) software.
It is designed to get customers up and running quickly.
-The document describes how to compile and run a DPDK application in a Linux application (linuxapp) environment,
+The document describes how to compile and run a DPDK application in a Linux application (linux) environment,
without going deeply into detail.
Documentation Roadmap
@@ -21,7 +21,7 @@ The following is a list of DPDK documents in the suggested reading order:
* Programmer's Guide: Describes:
- * The software architecture and how to use it (through examples), specifically in a Linux application (linuxapp) environment
+ * The software architecture and how to use it (through examples), specifically in a Linux application (linux) environment
* The content of the DPDK, the build system (including the commands that can be used in the root DPDK Makefile to build the development kit and
an application) and guidelines for porting an application
@@ -133,7 +133,7 @@ Configurations before running DPDK
# Build DPDK target.
cd dpdk_folder
- make install T=x86_64-native-linuxapp-gcc -j
+ make install T=x86_64-native-linux-gcc -j
# Get the hugepage size.
awk '/Hugepagesize/ {print $2}' /proc/meminfo
@@ -93,25 +93,25 @@ Some options in the script prompt the user for further data before proceeding.
------------------------------------------------------------------------
- [1] i686-native-linuxapp-gcc
+ [1] i686-native-linux-gcc
- [2] i686-native-linuxapp-icc
+ [2] i686-native-linux-icc
- [3] ppc_64-power8-linuxapp-gcc
+ [3] ppc_64-power8-linux-gcc
- [4] x86_64-native-bsdapp-clang
+ [4] x86_64-native-freebsd-clang
- [5] x86_64-native-bsdapp-gcc
+ [5] x86_64-native-freebsd-gcc
- [6] x86_64-native-linuxapp-clang
+ [6] x86_64-native-linux-clang
- [7] x86_64-native-linuxapp-gcc
+ [7] x86_64-native-linux-gcc
- [8] x86_64-native-linuxapp-icc
+ [8] x86_64-native-linux-icc
------------------------------------------------------------------------
- Step 2: Setup linuxapp environment
+ Step 2: Setup linux environment
------------------------------------------------------------------------
@@ -135,7 +135,7 @@ Some options in the script prompt the user for further data before proceeding.
------------------------------------------------------------------------
- Step 3: Run test application for linuxapp environment
+ Step 3: Run test application for linux environment
------------------------------------------------------------------------
@@ -173,19 +173,19 @@ Some options in the script prompt the user for further data before proceeding.
Option:
-The following selection demonstrates the creation of the ``x86_64-native-linuxapp-gcc`` DPDK library.
+The following selection demonstrates the creation of the ``x86_64-native-linux-gcc`` DPDK library.
.. code-block:: console
Option: 9
- ================== Installing x86_64-native-linuxapp-gcc
+ ================== Installing x86_64-native-linux-gcc
Configuration done
== Build lib
...
Build complete
- RTE_TARGET exported as x86_64-native-linuxapp-gcc
+ RTE_TARGET exported as x86_64-native-linux-gcc
The following selection demonstrates the starting of the DPDK UIO driver.
@@ -56,7 +56,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-thunderx-linuxapp-gcc
+ make config T=arm64-thunderx-linux-gcc
Initialization
@@ -33,26 +33,26 @@ Example output:
.. code-block:: console
- arm-armv7a-linuxapp-gcc
- arm64-armv8a-linuxapp-gcc
- arm64-dpaa2-linuxapp-gcc
- arm64-thunderx-linuxapp-gcc
- arm64-xgene1-linuxapp-gcc
- i686-native-linuxapp-gcc
- i686-native-linuxapp-icc
- ppc_64-power8-linuxapp-gcc
- x86_64-native-bsdapp-clang
- x86_64-native-bsdapp-gcc
- x86_64-native-linuxapp-clang
- x86_64-native-linuxapp-gcc
- x86_64-native-linuxapp-icc
- x86_x32-native-linuxapp-gcc
+ arm-armv7a-linux-gcc
+ arm64-armv8a-linux-gcc
+ arm64-dpaa2-linux-gcc
+ arm64-thunderx-linux-gcc
+ arm64-xgene1-linux-gcc
+ i686-native-linux-gcc
+ i686-native-linux-icc
+ ppc_64-power8-linux-gcc
+ x86_64-native-freebsd-clang
+ x86_64-native-freebsd-gcc
+ x86_64-native-linux-clang
+ x86_64-native-linux-gcc
+ x86_64-native-linux-icc
+ x86_x32-native-linux-gcc
To compile a PMD for Linux x86_64 gcc target, run the following "make" command:
.. code-block:: console
- make install T=x86_64-native-linuxapp-gcc
+ make install T=x86_64-native-linux-gcc
Use ARM (ThunderX, DPAA, X-Gene) or PowerPC target for respective platform.
@@ -102,7 +102,7 @@ This section demonstrates how to setup and run ``testpmd`` in Linux.
.. code-block:: console
modprobe uio
- insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
+ insmod ./x86_64-native-linux-gcc/kmod/igb_uio.ko
or
@@ -139,7 +139,7 @@ This section demonstrates how to setup and run ``testpmd`` in Linux.
.. code-block:: console
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -- -i
+ ./x86_64-native-linux-gcc/app/testpmd -l 0-3 -n 4 -- -i
Successful execution will show initialization messages from EAL, PMD and
testpmd application. A prompt will be displayed at the end for user commands
@@ -493,7 +493,7 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
.. code-block:: console
- cp x86_64-native-bsdapp-clang/kmod/contigmem.ko /boot/kernel/
+ cp x86_64-native-freebsd-clang/kmod/contigmem.ko /boot/kernel/
#. Add the following lines to /boot/loader.conf:
@@ -574,13 +574,13 @@ devices managed by librte_pmd_cxgbe in FreeBSD operating system.
.. code-block:: console
- kldload ./x86_64-native-bsdapp-clang/kmod/nic_uio.ko
+ kldload ./x86_64-native-freebsd-clang/kmod/nic_uio.ko
#. Start testpmd with basic parameters:
.. code-block:: console
- ./x86_64-native-bsdapp-clang/app/testpmd -l 0-3 -n 4 -w 0000:02:00.4 -- -i
+ ./x86_64-native-freebsd-clang/app/testpmd -l 0-3 -n 4 -w 0000:02:00.4 -- -i
Example output:
@@ -271,7 +271,7 @@ for details.
.. code-block:: console
- ./arm64-dpaa-linuxapp-gcc/testpmd -c 0xff -n 1 \
+ ./arm64-dpaa-linux-gcc/testpmd -c 0xff -n 1 \
-- -i --portmask=0x3 --nb-cores=1 --no-flush-rx
.....
@@ -572,7 +572,7 @@ PMD. Typically, the limit has to be raised to higher than 2GB.
e.g., 2621440
The compilation of any unused drivers can be disabled using the
-configuration file in config/ directory (e.g., config/common_linuxapp).
+configuration file in config/ directory (e.g., config/common_linux).
This would help in bringing down the time taken for building the
libraries and the initialization time of the application.
@@ -521,19 +521,19 @@ The setup procedure is as follows:
.. code-block:: console
- make install T=x86_64-native-linuxapp-gcc
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -- -i
+ make install T=x86_64-native-linux-gcc
+ ./x86_64-native-linux-gcc/app/testpmd -l 0-3 -n 4 -- -i
#. Finally, access the Guest OS using vncviewer with the localhost:5900 port and check the lspci command output in the Guest OS.
The virtual functions will be listed as available for use.
-#. Configure and install the DPDK with an x86_64-native-linuxapp-gcc configuration on the Guest OS as normal,
+#. Configure and install the DPDK with an x86_64-native-linux-gcc configuration on the Guest OS as normal,
that is, there is no change to the normal installation procedure.
.. code-block:: console
- make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
- cd x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc O=x86_64-native-linux-gcc
+ cd x86_64-native-linux-gcc
make
.. note::
@@ -223,7 +223,7 @@ These options can be modified in the ``.config`` file.
.. note::
- For Bluefield, target should be set to ``arm64-bluefield-linuxapp-gcc``. This
+ For Bluefield, target should be set to ``arm64-bluefield-linux-gcc``. This
will enable ``CONFIG_RTE_LIBRTE_MLX5_PMD`` and set ``RTE_CACHE_LINE_SIZE`` to
64. Default armv8a configuration of make build and meson build set it to 128
then brings performance degradation.
@@ -133,7 +133,7 @@ the path to the MUSDK installation directory needs to be exported.
export LIBMUSDK_PATH=<musdk>/usr/local
export CROSS=aarch64-linux-gnu-
- make config T=arm64-armv8a-linuxapp-gcc
+ make config T=arm64-armv8a-linux-gcc
sed -ri 's,(MVNETA_PMD=)n,\1y,' build/.config
make
@@ -180,9 +180,9 @@ For additional instructions regarding DPDK cross compilation please refer to :do
export LIBMUSDK_PATH=<musdk>/usr/local
export CROSS=<toolchain>/bin/aarch64-linux-gnu-
export RTE_KERNELDIR=<kernel-dir>
- export RTE_TARGET=arm64-armv8a-linuxapp-gcc
+ export RTE_TARGET=arm64-armv8a-linux-gcc
- make config T=arm64-armv8a-linuxapp-gcc
+ make config T=arm64-armv8a-linux-gcc
sed -i "s/MVNETA_PMD=y/MVNETA_PMD=n/" build/.config
sed -i "s/MVPP2_PMD=n/MVPP2_PMD=y/" build/.config
make
@@ -75,7 +75,7 @@ compile it along with other DPDK PMDs even if no BSP was installed previously.
Of course, a DPDK app will require such a BSP installed for using the
NFP PMD, along with a specific NFP firmware application.
-Default PMD configuration is at the **common_linuxapp configuration** file:
+Default PMD configuration is at the **common_linux configuration** file:
- **CONFIG_RTE_LIBRTE_NFP_PMD=y**
@@ -71,7 +71,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-thunderx-linuxapp-gcc install
+ make config T=arm64-thunderx-linux-gcc install
#. Running testpmd:
@@ -83,7 +83,7 @@ following ``make`` command:
.. code-block:: console
- ./arm64-thunderx-linuxapp-gcc/app/testpmd -c 700 \
+ ./arm64-thunderx-linux-gcc/app/testpmd -c 700 \
--base-virtaddr=0x100000000000 \
--mbuf-pool-ops-name="octeontx_fpavf" \
--vdev='event_octeontx' \
@@ -54,7 +54,7 @@ Release Notes*.
Build options
-------------
-The default PMD configuration available in the common_linuxapp configuration file:
+The default PMD configuration available in the common_linux configuration file:
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y
@@ -347,7 +347,7 @@ commands.
.. code-block:: console
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-25 -n 4 \
+ ./x86_64-native-linux-gcc/app/testpmd -l 23-25 -n 4 \
--vdev 'net_softnic0, \
firmware=./drivers/net/softnic/ \
firmware.cli, \
@@ -181,7 +181,7 @@ used to build the dpdk you pulled down.
Run pktgen from the pktgen directory in a terminal with a commandline like the
following::
- sudo ./app/app/x86_64-native-linuxapp-gcc/app/pktgen -l 1-5 -n 4 \
+ sudo ./app/app/x86_64-native-linux-gcc/app/pktgen -l 1-5 -n 4 \
--proc-type auto --log-level debug --socket-mem 512,512 --file-prefix pg \
--vdev=net_tap0 --vdev=net_tap1 -b 05:00.0 -b 05:00.1 \
-b 04:00.0 -b 04:00.1 -b 04:00.2 -b 04:00.3 \
@@ -70,7 +70,7 @@ Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and
for details.
To compile the ThunderX NICVF PMD for Linux arm64 gcc,
-use arm64-thunderx-linuxapp-gcc as target.
+use arm64-thunderx-linux-gcc as target.
Linux
-----
@@ -177,7 +177,7 @@ This section provides instructions to configure SR-IOV with Linux OS.
.. code-block:: console
- ./arm64-thunderx-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -w 0002:01:00.2 \
+ ./arm64-thunderx-linux-gcc/app/testpmd -l 0-3 -n 4 -w 0002:01:00.2 \
-- -i --no-flush-rx \
--port-topology=loop
@@ -95,7 +95,7 @@ drivers can be compiled with the following steps,
.. code-block:: console
cd <dpdk directory>
- make config T=arm64-thunderx-linuxapp-gcc
+ make config T=arm64-thunderx-linux-gcc
make
The example applications can be compiled using the following:
@@ -144,7 +144,7 @@ to build applications for **OCTEON TX** :sup:`®` platforms.
cd <dpdk directory>
export RTE_SDK=$PWD
export RTE_KERNELDIR=$THUNDER_ROOT/linux/kernel/linux
- make config T=arm64-thunderx-linuxapp-gcc
+ make config T=arm64-thunderx-linux-gcc
make -j CROSS=aarch64-thunderx-linux-gnu- CONFIG_RTE_KNI_KMOD=n CONFIG_RTE_EAL_IGB_UIO=n EXTRA_CFLAGS="-isystem <numa_install_dir>/include" EXTRA_LDFLAGS="-L<numa_install_dir>/lib -lnuma"
If NUMA support is not required, it can be disabled as explained in
@@ -154,7 +154,7 @@ Following steps could be used in that case.
.. code-block:: console
- make config T=arm64-thunderx-linuxapp-gcc
+ make config T=arm64-thunderx-linux-gcc
make CROSS=aarch64-thunderx-linux-gnu-
@@ -16,7 +16,7 @@ RTE_SDK and RTE_TARGET.
~/DPDK$ cd examples/helloworld/
~/DPDK/examples/helloworld$ export RTE_SDK=/home/user/DPDK
- ~/DPDK/examples/helloworld$ export RTE_TARGET=x86_64-native-linuxapp-gcc
+ ~/DPDK/examples/helloworld$ export RTE_TARGET=x86_64-native-linux-gcc
~/DPDK/examples/helloworld$ make
CC main.o
LD helloworld
@@ -40,7 +40,7 @@ The sample application (Hello World) can be duplicated in a new directory as a s
~$ cp -r DPDK/examples/helloworld my_rte_app
~$ cd my_rte_app/
~/my_rte_app$ export RTE_SDK=/home/user/DPDK
- ~/my_rte_app$ export RTE_TARGET=x86_64-native-linuxapp-gcc
+ ~/my_rte_app$ export RTE_TARGET=x86_64-native-linux-gcc
~/my_rte_app$ make
CC main.o
LD helloworld
@@ -31,13 +31,13 @@ Each build directory contains include files, libraries, and applications.
A build directory is specific to a configuration that includes architecture + execution environment + toolchain.
It is possible to have several build directories sharing the same sources with different configurations.
-For instance, to create a new build directory called my_sdk_build_dir using the default configuration template config/defconfig_x86_64-linuxapp,
+For instance, to create a new build directory called my_sdk_build_dir using the default configuration template config/defconfig_x86_64-linux,
we use:
.. code-block:: console
cd ${RTE_SDK}
- make config T=x86_64-native-linuxapp-gcc O=my_sdk_build_dir
+ make config T=x86_64-native-linux-gcc O=my_sdk_build_dir
This creates a new my_sdk_build_dir directory. After that, we can compile by doing:
@@ -65,7 +65,7 @@ To compile an application, the user must set the RTE_SDK and RTE_TARGET environm
.. code-block:: console
export RTE_SDK=/opt/DPDK
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
cd /path/to/my_app
For a new application, the user must create their own Makefile that includes some .mk files, such as
@@ -248,7 +248,7 @@ Useful Variables Provided by the Build System
* RTE_TOOLCHAIN: Defines the toolchain (gcc , icc).
It is the same value as CONFIG_RTE_TOOLCHAIN but without the double-quotes around the string.
-* RTE_EXEC_ENV: Defines the executive environment (linuxapp).
+* RTE_EXEC_ENV: Defines the executive environment (linux).
It is the same value as CONFIG_RTE_EXEC_ENV but without the double-quotes around the string.
* RTE_KERNELDIR: This variable contains the absolute path to the kernel sources that will be used to compile the kernel modules.
@@ -27,7 +27,7 @@ This is an optional parameter, the default output directory is build.
.. code-block:: console
- make config O=mybuild T=x86_64-native-linuxapp-gcc
+ make config O=mybuild T=x86_64-native-linux-gcc
Build Targets
-------------
@@ -163,7 +163,7 @@ For instance, the following command:
.. code-block:: console
cd $(RTE_SDK)
- make config O=mybuild T=x86_64-native-linuxapp-gcc
+ make config O=mybuild T=x86_64-native-linux-gcc
make O=mybuild
is equivalent to:
@@ -171,7 +171,7 @@ is equivalent to:
.. code-block:: console
cd $(RTE_SDK)
- make config O=mybuild T=x86_64-native-linuxapp-gcc
+ make config O=mybuild T=x86_64-native-linux-gcc
cd mybuild
# no need to specify O= now
@@ -54,9 +54,9 @@ A check is also performed at initialization time to ensure that the micro archit
Then, the main() function is called. The core initialization and launch is done in rte_eal_init() (see the API documentation).
It consist of calls to the pthread library (more specifically, pthread_self(), pthread_create(), and pthread_setaffinity_np()).
-.. _figure_linuxapp_launch:
+.. _figure_linux_launch:
.. figure:: img/linuxapp_launch.*
EAL Initialization in a Linux Application Environment
@@ -79,7 +79,7 @@ API documentation for details.
Multi-process Support
~~~~~~~~~~~~~~~~~~~~~
-The Linuxapp EAL allows a multi-process as well as a multi-threaded (pthread) deployment model.
+The Linux EAL allows a multi-process as well as a multi-threaded (pthread) deployment model.
See chapter
:ref:`Multi-process Support <Multi-process_Support>` for more details.
@@ -22,7 +22,7 @@ The following variables must be defined:
* ${RTE_SDK}: Points to the root directory of the DPDK.
-* ${RTE_TARGET}: Reference the target to be used for compilation (for example, x86_64-native-linuxapp-gcc).
+* ${RTE_TARGET}: Reference the target to be used for compilation (for example, x86_64-native-linux-gcc).
Build Targets
-------------
@@ -94,5 +94,5 @@ It is possible to run the Makefile from another directory, by specifying the out
.. code-block:: console
export RTE_SDK=/path/to/DPDK
- export RTE_TARGET=x86_64-native-linuxapp-icc
+ export RTE_TARGET=x86_64-native-linux-icc
make -f /path/to/my_app/Makefile S=/path/to/my_app O=/path/to/build_dir
@@ -73,7 +73,7 @@ To add a new library to the DPDK, proceed as follows:
.. code-block:: console
cd ${RTE_SDK}
- make config T=x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc
make
@@ -105,5 +105,5 @@ Once you have added a library, a new test case should be added in the test appli
.. code-block:: console
cd ${RTE_SDK}
- make config T=x86_64-native-linuxapp-gcc
+ make config T=x86_64-native-linux-gcc
make
@@ -205,7 +205,7 @@ SW
Target
In the DPDK, the target is a combination of architecture, machine,
executive environment and toolchain. For example:
- i686-native-linuxapp-gcc.
+ i686-native-linux-gcc.
TCP
Transmission Control Protocol
@@ -17,9 +17,9 @@
id="svg2"
sodipodi:version="0.32"
inkscape:version="0.48.4 r9939"
- sodipodi:docname="linuxapp_launch.svg"
+ sodipodi:docname="linux_launch.svg"
inkscape:output_extension="org.inkscape.output.svg.inkscape"
- inkscape:export-filename="/home/matz/rapports/doc/intel/architecture_docs/linuxapp_launch.png"
+ inkscape:export-filename="/home/matz/rapports/doc/intel/architecture_docs/linux_launch.png"
inkscape:export-xdpi="90"
inkscape:export-ydpi="90"
version="1.1">
@@ -31,7 +31,7 @@ The following is a list of DPDK documents in the suggested reading order:
* **Programmer's Guide** (this document): Describes:
* The software architecture and how to use it (through examples),
- specifically in a Linux* application (linuxapp) environment
+ specifically in a Linux* application (linux) environment
* The content of the DPDK, the build system
(including the commands that can be used in the root DPDK Makefile to build the development kit and an application)
@@ -52,7 +52,7 @@ The following are examples of how the variables can be set:
.. code-block:: console
export RTE_SDK=/home/user/DPDK
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
See the *DPDK Getting Started Guide* for information on setting up the development environment.
@@ -84,7 +84,7 @@ an armv8 machine.
make
sudo insmod pmu_el0_cycle_counter.ko
cd $DPDK_DIR
- make config T=arm64-armv8a-linuxapp-gcc
+ make config T=arm64-armv8a-linux-gcc
echo "CONFIG_RTE_ARM_EAL_RDTSC_USE_PMU=y" >> build/.config
make
@@ -1511,7 +1511,7 @@ To enable it, use the DPDK configuration parameter:
This parameter must be set to y.
The parameter is found in the build configuration files in the DPDK/config directory,
-for example, DPDK/config/common_linuxapp.
+for example, DPDK/config/common_linux.
RED configuration parameters are specified in the rte_red_params structure within the rte_sched_port_params structure
that is passed to the scheduler on initialization.
RED parameters are specified separately for four traffic classes and three packet colors (green, yellow and red)
@@ -77,7 +77,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa2-linuxapp-gcc install
+ make config T=arm64-dpaa2-linux-gcc install
Initialization
--------------
@@ -81,7 +81,7 @@ following ``make`` command:
.. code-block:: console
cd <DPDK-source-directory>
- make config T=arm64-dpaa2-linuxapp-gcc install
+ make config T=arm64-dpaa2-linux-gcc install
Initialization
--------------
@@ -110,7 +110,7 @@ New Features
* Added static linkage of ``mlx`` dependency.
* Improved stability of E-Switch flow driver.
* Added new make build configuration to set the cacheline size for Bluefield
- correctly - ``arm64-bluefield-linuxapp-gcc``.
+ correctly - ``arm64-bluefield-linux-gcc``.
* **Updated the enic driver.**
@@ -70,7 +70,7 @@ New Features
* In UIO, the RX interrupt shares the same vector with other
interrupts. When the RX interrupt and LSC interrupt are both enabled, only
the former is available.
- * RX interrupt is only implemented for the linuxapp target.
+ * RX interrupt is only implemented for the linux target.
* The feature is only currently enabled for tow PMDs: ixgbe and igb.
@@ -46,7 +46,7 @@ Compiling the Application
.. code-block:: console
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
See the *DPDK Getting Started Guide* for possible RTE_TARGET values.
@@ -78,7 +78,7 @@ the specified baseband operation are available on application initialization.
This means that HW baseband device/s must be bound to a DPDK driver or
a SW baseband device/s (virtual BBdev) must be created (using --vdev).
-To run the application in linuxapp environment with the turbo_sw baseband device
+To run the application in linux environment with the turbo_sw baseband device
using the whitelisted port running on 1 encoding lcore and 1 decoding lcore
issue the command:
@@ -116,7 +116,7 @@ ports.
.. code-block:: console
- $ ./pktgen-3.4.0/app/x86_64-native-linuxapp-gcc/pktgen -c 0x3 \
+ $ ./pktgen-3.4.0/app/x86_64-native-linux-gcc/pktgen -c 0x3 \
--socket-mem=1,1 --file-prefix=pg -w <NIC1PCIADDR> -- -m 1.0 -P
where:
@@ -48,7 +48,7 @@ The application is located in the ``cmd_line`` sub-directory.
Running the Application
-----------------------
-To run the application in linuxapp environment, issue the following command:
+To run the application in linux environment, issue the following command:
.. code-block:: console
@@ -46,7 +46,7 @@ Running the Application
* -p PORTMASK: Hexadecimal bitmask of ports to configure
-#. To run the application in linuxapp environment with 10 lcores, 4 ports,
+#. To run the application in linux environment with 10 lcores, 4 ports,
issue the command:
.. code-block:: console
@@ -112,7 +112,7 @@ where,
are folder paths.
-To run the application in linuxapp environment to test one AES FIPS test data
+To run the application in linux environment to test one AES FIPS test data
file for crypto_aesni_mb PMD, issue the command:
.. code-block:: console
@@ -121,7 +121,7 @@ file for crypto_aesni_mb PMD, issue the command:
--req-file /PATH/TO/REQUEST/FILE.req --rsp-file ./PATH/TO/RESPONSE/FILE.rsp
--cryptodev crypto_aesni_mb
-To run the application in linuxapp environment to test all AES-GCM FIPS test
+To run the application in linux environment to test all AES-GCM FIPS test
data files in one folder for crypto_aesni_gcm PMD, issue the command:
.. code-block:: console
@@ -24,7 +24,7 @@ The application is located in the ``flow_classify`` sub-directory.
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment:
+To run the example in a ``linux`` environment:
.. code-block:: console
@@ -26,7 +26,7 @@ Set the target, for example:
.. code-block:: console
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
See the *DPDK Getting Started* Guide for possible ``RTE_TARGET`` values.
@@ -40,7 +40,7 @@ Build the application as follows:
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment:
+To run the example in a ``linux`` environment:
.. code-block:: console
@@ -17,7 +17,7 @@ The application is located in the ``helloworld`` sub-directory.
Running the Application
-----------------------
-To run the example in a linuxapp environment:
+To run the example in a linux environment:
.. code-block:: console
@@ -48,7 +48,7 @@ This is done in the main() function using the following code:
if (ret < 0)
rte_panic("Cannot init EAL\n");
-This call finishes the initialization process that was started before main() is called (in case of a Linuxapp environment).
+This call finishes the initialization process that was started before main() is called (in case of a Linux environment).
The argc and argv arguments are provided to the rte_eal_init() function.
The value returned is the number of parsed arguments.
@@ -61,7 +61,7 @@ where:
* -q NQ is the number of queue (=ports) per lcore (the default is 1)
-To run the example in linuxapp environment with 2 lcores (2,4) over 2 ports(0,2) with 1 RX queue per lcore:
+To run the example in linux environment with 2 lcores (2,4) over 2 ports(0,2) with 1 RX queue per lcore:
.. code-block:: console
@@ -90,7 +90,7 @@ To run the example in linuxapp environment with 2 lcores (2,4) over 2 ports(0,2)
IP_FRAG: entering main loop on lcore 2
IP_FRAG: -- lcoreid=2 portid=0
-To run the example in linuxapp environment with 1 lcore (4) over 2 ports(0,2) with 2 RX queues per lcore:
+To run the example in linux environment with 1 lcore (4) over 2 ports(0,2) with 2 RX queues per lcore:
.. code-block:: console
@@ -57,7 +57,7 @@ where:
then they are considered as invalid and will be dropped.
Valid range is 1ms - 3600s. Default value: 1s.
-To run the example in linuxapp environment with 2 lcores (2,4) over 2 ports(0,2) with 1 RX queue per lcore:
+To run the example in linux environment with 2 lcores (2,4) over 2 ports(0,2) with 1 RX queue per lcore:
.. code-block:: console
@@ -88,7 +88,7 @@ To run the example in linuxapp environment with 2 lcores (2,4) over 2 ports(0,2)
IP_RSMBL: entering main loop on lcore 2
IP_RSMBL: -- lcoreid=2 portid=0
-To run the example in linuxapp environment with 1 lcore (4) over 2 ports(0,2) with 2 RX queues per lcore:
+To run the example in linux environment with 1 lcore (4) over 2 ports(0,2) with 2 RX queues per lcore:
.. code-block:: console
@@ -63,7 +63,7 @@ where,
* ``T PERIOD``: statistics will be refreshed each PERIOD seconds (0 to
disable, 10 default, 86400 maximum).
-To run the application in linuxapp environment with 4 lcores, 16 ports
+To run the application in linux environment with 4 lcores, 16 ports
8 RX queues per lcore and a ping interval of 10ms, issue the command:
.. code-block:: console
@@ -87,7 +87,7 @@ The application is located in the ``examples/kni`` sub-directory.
.. note::
- This application is intended as a linuxapp only.
+ This application is intended as a linux only.
Running the kni Example Application
-----------------------------------
@@ -66,7 +66,7 @@ The application is located in the ``l2fwd-cat`` sub-directory.
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment and enable CAT on cpus 0-2:
+To run the example in a ``linux`` environment and enable CAT on cpus 0-2:
.. code-block:: console
@@ -158,7 +158,7 @@ the specified crypto operation are available on application initialization.
This means that HW crypto device/s must be bound to a DPDK driver or
a SW crypto device/s (virtual crypto PMD) must be created (using --vdev).
-To run the application in linuxapp environment with 2 lcores, 2 ports and 2 crypto devices, issue the command:
+To run the application in linux environment with 2 lcores, 2 ports and 2 crypto devices, issue the command:
.. code-block:: console
@@ -91,7 +91,7 @@ where,
* l: Use locale thousands separator when formatting big numbers.
-To run the application in linuxapp environment with 4 lcores, 16 ports, 8 RX queues per lcore and
+To run the application in linux environment with 4 lcores, 16 ports, 8 RX queues per lcore and
thousands separator printing, issue the command:
.. code-block:: console
@@ -101,7 +101,7 @@ where,
* --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default).
-To run the application in linuxapp environment with 4 lcores, 16 ports and 8 RX queues per lcore and MAC address
+To run the application in linux environment with 4 lcores, 16 ports and 8 RX queues per lcore and MAC address
updating enabled, issue the command:
.. code-block:: console
@@ -49,7 +49,7 @@ where,
* -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default)
-To run the application in a linuxapp environment with 4 lcores, 4 memory channels, 16 ports and 8 RX queues per lcore,
+To run the application in a linux environment with 4 lcores, 4 memory channels, 16 ports and 8 RX queues per lcore,
issue the command:
.. code-block:: console
@@ -117,7 +117,7 @@ where,
If two ``-i`` parameters are given, the two interfaces form a bridge,
where traffic received on one interface is replicated and sent to the other interface.
-For example, to run the application in a linuxapp environment using port 0 and 2:
+For example, to run the application in a linux environment using port 0 and 2:
.. code-block:: console
@@ -1158,7 +1158,7 @@ To build and run the pthread shim example
.. code-block:: console
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
See the DPDK Getting Started Guide for possible RTE_TARGET values.
@@ -58,7 +58,7 @@ To compile the sample application see :doc:`compiling`.
The application is located in the ``ptpclient`` sub-directory.
.. note::
- To compile the application edit the ``config/common_linuxapp`` configuration file to enable IEEE1588
+ To compile the application edit the ``config/common_linux`` configuration file to enable IEEE1588
and then recompile DPDK:
.. code-block:: console
@@ -68,7 +68,7 @@ The application is located in the ``ptpclient`` sub-directory.
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment:
+To run the example in a ``linux`` environment:
.. code-block:: console
@@ -37,7 +37,7 @@ The application is located in the ``qos_sched`` sub-directory.
.. note::
- This application is intended as a linuxapp only.
+ This application is intended as a linux only.
.. note::
@@ -88,7 +88,7 @@ where,
-p PORTMASK: A hexadecimal bitmask of the ports to configure
-To run the application in a linuxapp environment with four logical cores and ports 0 and 2,
+To run the application in a linux environment with four logical cores and ports 0 and 2,
issue the following command:
.. code-block:: console
@@ -110,7 +110,7 @@ The control application requires a number of command line options:
The --proc-type=secondary option is necessary for the EAL to properly initialize the control application to
use the same huge pages as the core application and thus be able to access its rings.
-To run the application in a linuxapp environment on logical core 0, issue the following command:
+To run the application in a linux environment on logical core 0, issue the following command:
.. code-block:: console
@@ -32,7 +32,7 @@ target. This is generally on by default:
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment:
+To run the example in a ``linux`` environment:
.. code-block:: console
@@ -31,7 +31,7 @@ Compiling the Application
.. code-block:: console
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
See the *DPDK Getting Started* Guide for possible RTE_TARGET values.
@@ -21,7 +21,7 @@ The application is located in the ``skeleton`` sub-directory.
Running the Application
-----------------------
-To run the example in a ``linuxapp`` environment:
+To run the example in a ``linux`` environment:
.. code-block:: console
@@ -94,7 +94,7 @@ Compiling the Sample Code
-------------------------
To enable vhost, turn on vhost library in the configure file
-``config/common_linuxapp``.
+``config/common_linux``.
.. code-block:: console
@@ -17,7 +17,7 @@ The application is located in the ``timer`` sub-directory.
Running the Application
-----------------------
-To run the example in linuxapp environment:
+To run the example in linux environment:
.. code-block:: console
@@ -68,7 +68,7 @@ The application is located in the ``vmdq_dcb`` sub-directory.
Running the Application
-----------------------
-To run the example in a linuxapp environment:
+To run the example in a linux environment:
.. code-block:: console
@@ -250,7 +250,7 @@ See :doc:`l2_forward_real_virtual` for more information.
Statistics Display
~~~~~~~~~~~~~~~~~~
-When run in a linuxapp environment,
+When run in a linux environment,
the VMDQ and DCB Forwarding sample application can display statistics showing the number of packets read from each RX queue.
This is provided by way of a signal handler for the SIGHUP signal,
which simply prints to standard output the packet counts in grid form.
@@ -19,7 +19,7 @@ The basic compilation steps are:
.. code-block:: console
- export RTE_TARGET=x86_64-native-linuxapp-gcc
+ export RTE_TARGET=x86_64-native-linux-gcc
#. Build the application:
@@ -227,7 +227,7 @@ Running Tests
-------------
Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled for
-x86_64-native-linuxapp-icc target:
+x86_64-native-linux-icc target:
::
@@ -256,7 +256,7 @@ x86_64-native-linuxapp-icc target:
|-- turbo_enc_c1_k40_r0_e1194_rm.data
|-- turbo_enc_c1_k6144_r0_e32256_crc24b_rm.data
- |-- x86_64-native-linuxapp-icc
+ |-- x86_64-native-linux-icc
|-- app
|-- testbbdev
@@ -265,7 +265,7 @@ All bbdev devices
.. code-block:: console
- ./test-bbdev.py -p ../../x86_64-native-linuxapp-icc/app/testbbdev
+ ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev
-v turbo_dec_default.data
It runs all available tests using the test vector filled based on
@@ -279,7 +279,7 @@ baseband turbo_sw device
.. code-block:: console
- ./test-bbdev.py -p ../../x86_64-native-linuxapp-icc/app/testbbdev
+ ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev
-e="--vdev=baseband_turbo_sw" -t 120 -c validation
-v ./test_vectors/turbo_* -n 64 -b 8 32
@@ -46,7 +46,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_SOFTNIC) += conn.c
SYMLINK-y-include += rte_eth_softnic.h
ifneq ($(CONFIG_RTE_EXEC_ENV),"linuxapp")
-$(info Softnic PMD can only operate in a linuxapp environment, \
+$(info Softnic PMD can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
clean:
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -46,7 +46,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -48,7 +48,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overwritten by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
else
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overwritten by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linuxapp environment, \
+$(error This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
endif
@@ -48,7 +48,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -52,7 +52,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
INC += $(sort $(wildcard *.h))
@@ -46,7 +46,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -42,7 +42,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -45,7 +45,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -64,12 +64,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
clean:
@@ -45,7 +45,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -57,7 +57,7 @@ ifeq ($(RTE_SDK),)
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -45,7 +45,7 @@ REMOTE_IPV6=fd12:3456:789a:0031:0000:0000:0000:0014
LOCAL_IPV6=fd12:3456:789a:0031:0000:0000:0000:0092
DPDK_PATH=${RTE_SDK:-${PWD}}
-DPDK_BUILD=${RTE_TARGET:-x86_64-native-linuxapp-gcc}
+DPDK_BUILD=${RTE_TARGET:-x86_64-native-linux-gcc}
SGW_OUT_FILE=./ipsec-secgw.out1
@@ -45,7 +45,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -45,12 +45,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linuxapp environment, \
+$(error This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
endif
@@ -50,7 +50,7 @@ $(error "Please define PQOS_INSTALL_PATH environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -46,7 +46,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -46,12 +46,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
else
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linuxapp environment, \
+$(error This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
endif
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
unexport RTE_SRCDIR RTE_OUTPUT RTE_EXTMK
@@ -6,12 +6,12 @@ $(error "Please define the RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
clean:
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overriddegitn by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -46,7 +46,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,12 +44,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
clean:
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linuxapp environment, \
+$(error This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
endif
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -48,12 +48,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(error This application can only operate in a linuxapp environment, \
+$(error This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
endif
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV),"linuxapp")
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
else
@@ -48,12 +48,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
else
@@ -6,12 +6,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
else
@@ -47,12 +47,12 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
-$(info This application can only operate in a linuxapp environment, \
+$(info This application can only operate in a linux environment, \
please change the definition of the RTE_TARGET environment variable)
all:
else
@@ -10,7 +10,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -6,7 +6,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -44,7 +44,7 @@ $(error "Please define RTE_SDK environment variable")
endif
# Default target, can be overridden by command line or environment
-RTE_TARGET ?= x86_64-native-linuxapp-gcc
+RTE_TARGET ?= x86_64-native-linux-gcc
include $(RTE_SDK)/mk/rte.vars.mk
@@ -39,7 +39,7 @@ void rte_dump_registers(void);
*
* Display the format string and its expanded arguments (printf-like).
*
- * In a linuxapp environment, this function dumps the stack and calls
+ * In a linux environment, this function dumps the stack and calls
* abort() resulting in a core dump if enabled.
*
* The function never returns.
@@ -41,7 +41,7 @@ enum rte_lcore_role_t {
};
/**
- * The type of process in a linuxapp, multi-process setup
+ * The type of process in a linux, multi-process setup
*/
enum rte_proc_type_t {
RTE_PROC_AUTO = -1, /* allow auto-detection of primary/secondary */
@@ -24,7 +24,7 @@ EXPORT_MAP := ../../rte_eal_version.map
LIBABIVER := 9
-# specific to bsdapp exec-env
+# specific to freebsd exec-env
SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) := eal.c
SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_cpuflags.c
SRCS-$(CONFIG_RTE_EXEC_ENV_FREEBSD) += eal_memory.c
@@ -86,7 +86,7 @@ CFLAGS_eal_thread.o += -Wno-return-type
CFLAGS_eal_hpet.o += -Wno-return-type
endif
-INC := # no bsdapp specific headers
+INC := # no bsd specific headers
SYMLINK-$(CONFIG_RTE_EXEC_ENV_FREEBSD)-include/exec-env := \
$(addprefix include/exec-env/,$(INC))
@@ -29,7 +29,7 @@ ifeq ($(CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES),y)
LDLIBS += -lnuma
endif
-# specific to linuxapp exec-env
+# specific to linux exec-env
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) := eal.c
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_cpuflags.c
SRCS-$(CONFIG_RTE_EXEC_ENV_LINUX) += eal_hugepage_info.c
new file mode 120000
@@ -0,0 +1 @@
+freebsd/
\ No newline at end of file
similarity index 100%
rename from mk/exec-env/bsdapp/rte.app.mk
rename to mk/exec-env/freebsd/rte.app.mk
similarity index 94%
rename from mk/exec-env/bsdapp/rte.vars.mk
rename to mk/exec-env/freebsd/rte.vars.mk
@@ -9,7 +9,7 @@
# - define EXECENV_ASFLAGS variable (overridden by cmdline)
# - may override any previously defined variable
#
-# examples for RTE_EXEC_ENV: linuxapp, bsdapp
+# examples for RTE_EXEC_ENV: linux, freebsd
#
ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y)
EXECENV_CFLAGS = -pthread -fPIC
similarity index 100%
rename from mk/exec-env/linuxapp/rte.app.mk
rename to mk/exec-env/linux/rte.app.mk
similarity index 95%
rename from mk/exec-env/linuxapp/rte.vars.mk
rename to mk/exec-env/linux/rte.vars.mk
@@ -9,7 +9,7 @@
# - define EXECENV_ASFLAGS variable (overridden by cmdline)
# - may override any previously defined variable
#
-# examples for RTE_EXEC_ENV: linuxapp, bsdapp
+# examples for RTE_EXEC_ENV: linux, freebsd
#
ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),y)
EXECENV_CFLAGS = -pthread -fPIC
new file mode 120000
@@ -0,0 +1 @@
+linux/
\ No newline at end of file
@@ -21,9 +21,10 @@ showversionum:
$(RTE_SRCDIR)/lib/librte_eal/common/include/rte_version.h); \
printf '%02d%02d\n' "$$1" "$$2"
-INSTALL_CONFIGS := $(sort $(filter-out %~,\
+INSTALL_CONFIGS := $(sort $(filter-out %app-icc,$(filter-out %app-clang,\
+ $(filter-out %app-gcc,$(filter-out %~,\
$(patsubst $(RTE_SRCDIR)/config/defconfig_%,%,\
- $(wildcard $(RTE_SRCDIR)/config/defconfig_*))))
+ $(wildcard $(RTE_SRCDIR)/config/defconfig_*)))))))
INSTALL_TARGETS := $(addsuffix _install,$(INSTALL_CONFIGS))
.PHONY: showconfigs
@@ -53,9 +54,9 @@ defconfig:
)-$(shell \
uname | awk '{ \
if ($$0 == "Linux") { \
- print "linuxapp"} \
+ print "linux"} \
else { \
- print "bsdapp"} }' \
+ print "freebsd"} }' \
)-$(shell \
${CC} --version | grep -o 'cc\|gcc\|icc\|clang' | awk \
'{ \
@@ -24,6 +24,9 @@ export prefix ?=
kerneldir ?= $(prefix)/kmod
else
ifeq ($(RTE_EXEC_ENV),linuxapp)
+RTE_EXEC_ENV=linux
+endif
+ifeq ($(RTE_EXEC_ENV),linux)
kerneldir ?= /lib/modules/$(shell uname -r)/extra/dpdk
else
kerneldir ?= /boot/modules
@@ -28,7 +28,7 @@ export BUILDING_RTE_SDK
#
# We can specify the configuration template when doing the "make
-# config". For instance: make config T=x86_64-native-linuxapp-gcc
+# config". For instance: make config T=x86_64-native-linux-gcc
#
RTE_CONFIG_TEMPLATE :=
ifdef T
@@ -479,7 +479,7 @@ step1_func()
#
step2_func()
{
- TITLE="Setup linuxapp environment"
+ TITLE="Setup linux environment"
TEXT[1]="Insert IGB UIO module"
FUNC[1]="load_igb_uio_module"
@@ -514,7 +514,7 @@ step2_func()
#
step3_func()
{
- TITLE="Run test application for linuxapp environment"
+ TITLE="Run test application for linux environment"
TEXT[1]="Run test application (\$RTE_TARGET/app/test)"
FUNC[1]="run_test_app"