[v2,4/9] net/mlx5: add validation for Direct Rule E-Switch

  Add validation logic for E-Switch using Direct Rules.

Signed-off-by: Ori Kam <orika@mellanox.com>
---
v2:
* Address ML comments.
---
 drivers/net/mlx5/mlx5.h         |   2 +
 drivers/net/mlx5/mlx5_ethdev.c  |  41 +++++++
 drivers/net/mlx5/mlx5_flow.h    |   5 +
 drivers/net/mlx5/mlx5_flow_dv.c | 243 ++++++++++++++++++++++++++++++++++++++--
 4 files changed, 280 insertions(+), 11 deletions(-)
  

On Thu, Apr 18, 2019 at 11:28:45AM +0000, Ori Kam wrote:
> Add validation logic for E-Switch using Direct Rules.
> 
> Signed-off-by: Ori Kam <orika@mellanox.com>
> ---

Acked-by: Yongseok Koh <yskoh@mellanox.com>

> v2:
> * Address ML comments.
> ---
>  drivers/net/mlx5/mlx5.h         |   2 +
>  drivers/net/mlx5/mlx5_ethdev.c  |  41 +++++++
>  drivers/net/mlx5/mlx5_flow.h    |   5 +
>  drivers/net/mlx5/mlx5_flow_dv.c | 243 ++++++++++++++++++++++++++++++++++++++--
>  4 files changed, 280 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
> index b9946f6..dd22bb6 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -412,6 +412,8 @@ int mlx5_ibv_device_to_pci_addr(const struct ibv_device *device,
>  unsigned int mlx5_dev_to_port_id(const struct rte_device *dev,
>  				 uint16_t *port_list,
>  				 unsigned int port_list_n);
> +int mlx5_port_to_eswitch_info(uint16_t port, uint16_t *es_domain_id,
> +			      uint16_t *es_port_id);
>  int mlx5_sysfs_switch_info(unsigned int ifindex,
>  			   struct mlx5_switch_info *info);
>  bool mlx5_translate_port_name(const char *port_name_in,
> diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
> index 3992918..695440a 100644
> --- a/drivers/net/mlx5/mlx5_ethdev.c
> +++ b/drivers/net/mlx5/mlx5_ethdev.c
> @@ -1376,6 +1376,47 @@ int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
>  }
>  
>  /**
> + * Get the E-Switch domain id this port belongs to.
> + *
> + * @param[in] port
> + *   Device port id.
> + * @param[out] es_domain_id
> + *   E-Switch domain id.
> + * @param[out] es_port_id
> + *   The port id of the port in the E-Switch.
> + *
> + * @return
> + *   0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +int
> +mlx5_port_to_eswitch_info(uint16_t port,
> +			  uint16_t *es_domain_id, uint16_t *es_port_id)
> +{
> +	struct rte_eth_dev *dev;
> +	struct mlx5_priv *priv;
> +
> +	if (port >= RTE_MAX_ETHPORTS) {
> +		rte_errno = EINVAL;
> +		return -rte_errno;
> +	}
> +	if (!rte_eth_dev_is_valid_port(port)) {
> +		rte_errno = ENODEV;
> +		return -rte_errno;
> +	}
> +	dev = &rte_eth_devices[port];
> +	priv = dev->data->dev_private;
> +	if (!(priv->representor || priv->master)) {
> +		rte_errno = EINVAL;
> +		return -rte_errno;
> +	}
> +	if (es_domain_id)
> +		*es_domain_id = priv->domain_id;
> +	if (es_port_id)
> +		*es_port_id = priv->vport_id;
> +	return 0;
> +}
> +
> +/**
>   * Get switch information associated with network interface.
>   *
>   * @param ifindex
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index 9f47fd4..85954c2 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -48,6 +48,7 @@
>  
>  /* General pattern items bits. */
>  #define MLX5_FLOW_ITEM_METADATA (1u << 16)
> +#define MLX5_FLOW_ITEM_PORT_ID (1u << 17)
>  
>  /* Outer Masks. */
>  #define MLX5_FLOW_LAYER_OUTER_L3 \
> @@ -118,6 +119,10 @@
>  	(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE | \
>  	 MLX5_FLOW_ACTION_RSS | MLX5_FLOW_ACTION_JUMP)
>  
> +#define MLX5_FLOW_FATE_ESWITCH_ACTIONS \
> +	(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_PORT_ID | \
> +	 MLX5_FLOW_ACTION_JUMP)
> +
>  #define MLX5_FLOW_ENCAP_ACTIONS	(MLX5_FLOW_ACTION_VXLAN_ENCAP | \
>  				 MLX5_FLOW_ACTION_NVGRE_ENCAP | \
>  				 MLX5_FLOW_ACTION_RAW_ENCAP)
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index 1e25e0b..b819359 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -613,6 +613,89 @@ struct field_modify_info modify_tcp[] = {
>  }
>  
>  /**
> + * Validate vport item.
> + *
> + * @param[in] dev
> + *   Pointer to the rte_eth_dev structure.
> + * @param[in] item
> + *   Item specification.
> + * @param[in] attr
> + *   Attributes of flow that includes this item.
> + * @param[in] item_flags
> + *   Bit-fields that holds the items detected until now.
> + * @param[out] error
> + *   Pointer to error structure.
> + *
> + * @return
> + *   0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_validate_item_port_id(struct rte_eth_dev *dev,
> +			      const struct rte_flow_item *item,
> +			      const struct rte_flow_attr *attr,
> +			      uint64_t item_flags,
> +			      struct rte_flow_error *error)
> +{
> +	const struct rte_flow_item_port_id *spec = item->spec;
> +	const struct rte_flow_item_port_id *mask = item->mask;
> +	const struct rte_flow_item_port_id switch_mask = {
> +			.id = 0xffffffff,
> +	};
> +	uint16_t esw_domain_id;
> +	uint16_t item_port_esw_domain_id;
> +	int ret;
> +
> +	if (!attr->transfer)
> +		return rte_flow_error_set(error, EINVAL,
> +					  RTE_FLOW_ERROR_TYPE_ITEM,
> +					  NULL,
> +					  "match on port id is valid only"
> +					  " when transfer flag is enabled");
> +	if (item_flags & MLX5_FLOW_ITEM_PORT_ID)
> +		return rte_flow_error_set(error, ENOTSUP,
> +					  RTE_FLOW_ERROR_TYPE_ITEM, item,
> +					  "multiple source ports are not"
> +					  " supported");
> +	if (!mask)
> +		mask = &switch_mask;
> +	if (mask->id != 0xffffffff)
> +		return rte_flow_error_set(error, ENOTSUP,
> +					   RTE_FLOW_ERROR_TYPE_ITEM_MASK,
> +					   mask,
> +					   "no support for partial mask on"
> +					   " \"id\" field");
> +	ret = mlx5_flow_item_acceptable
> +				(item, (const uint8_t *)mask,
> +				 (const uint8_t *)&rte_flow_item_port_id_mask,
> +				 sizeof(struct rte_flow_item_port_id),
> +				 error);
> +	if (ret)
> +		return ret;
> +	if (!spec)
> +		return 0;
> +	ret = mlx5_port_to_eswitch_info(spec->id, &item_port_esw_domain_id,
> +					NULL);
> +	if (ret)
> +		return rte_flow_error_set(error, -ret,
> +					  RTE_FLOW_ERROR_TYPE_ITEM_SPEC, spec,
> +					  "failed to obtain E-Switch info for"
> +					  " port");
> +	ret = mlx5_port_to_eswitch_info(dev->data->port_id,
> +					&esw_domain_id, NULL);
> +	if (ret < 0)
> +		return rte_flow_error_set(error, -ret,
> +					  RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> +					  NULL,
> +					  "failed to obtain E-Switch info");
> +	if (item_port_esw_domain_id != esw_domain_id)
> +		return rte_flow_error_set(error, -ret,
> +					  RTE_FLOW_ERROR_TYPE_ITEM_SPEC, spec,
> +					  "cannot match on a port from a"
> +					  " different E-Switch");
> +	return 0;
> +}
> +
> +/**
>   * Validate count action.
>   *
>   * @param[in] dev
> @@ -676,7 +759,7 @@ struct field_modify_info modify_tcp[] = {
>  					  RTE_FLOW_ERROR_TYPE_ACTION, NULL,
>  					  "can only have a single encap or"
>  					  " decap action in a flow");
> -	if (attr->ingress)
> +	if (!attr->transfer && attr->ingress)
>  		return rte_flow_error_set(error, ENOTSUP,
>  					  RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
>  					  NULL,
> @@ -761,7 +844,8 @@ struct field_modify_info modify_tcp[] = {
>  					  "can only have a single encap"
>  					  " action in a flow");
>  	/* encap without preceding decap is not supported for ingress */
> -	if (attr->ingress && !(action_flags & MLX5_FLOW_ACTION_RAW_DECAP))
> +	if (!attr->transfer &&  attr->ingress &&
> +	    !(action_flags & MLX5_FLOW_ACTION_RAW_DECAP))
>  		return rte_flow_error_set(error, ENOTSUP,
>  					  RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
>  					  NULL,
> @@ -1561,6 +1645,77 @@ struct field_modify_info modify_tcp[] = {
>  	return 0;
>  }
>  
> +/*
> + * Validate the port_id action.
> + *
> + * @param[in] dev
> + *   Pointer to rte_eth_dev structure.
> + * @param[in] action_flags
> + *   Bit-fields that holds the actions detected until now.
> + * @param[in] action
> + *   Port_id RTE action structure.
> + * @param[in] attr
> + *   Attributes of flow that includes this action.
> + * @param[out] error
> + *   Pointer to error structure.
> + *
> + * @return
> + *   0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_validate_action_port_id(struct rte_eth_dev *dev,
> +				uint64_t action_flags,
> +				const struct rte_flow_action *action,
> +				const struct rte_flow_attr *attr,
> +				struct rte_flow_error *error)
> +{
> +	const struct rte_flow_action_port_id *port_id;
> +	uint16_t port;
> +	uint16_t esw_domain_id;
> +	uint16_t act_port_domain_id;
> +	int ret;
> +
> +	if (!attr->transfer)
> +		return rte_flow_error_set(error, ENOTSUP,
> +					  RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> +					  NULL,
> +					  "port id action is valid in transfer"
> +					  " mode only");
> +	if (!action || !action->conf)
> +		return rte_flow_error_set(error, ENOTSUP,
> +					  RTE_FLOW_ERROR_TYPE_ACTION_CONF,
> +					  NULL,
> +					  "port id action parameters must be"
> +					  " specified");
> +	if (action_flags & (MLX5_FLOW_FATE_ACTIONS |
> +			    MLX5_FLOW_FATE_ESWITCH_ACTIONS))
> +		return rte_flow_error_set(error, EINVAL,
> +					  RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> +					  "can have only one fate actions in"
> +					  " a flow");
> +	ret = mlx5_port_to_eswitch_info(dev->data->port_id,
> +					&esw_domain_id, NULL);
> +	if (ret < 0)
> +		return rte_flow_error_set(error, -ret,
> +					  RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> +					  NULL,
> +					  "failed to obtain E-Switch info");
> +	port_id = action->conf;
> +	port = port_id->original ? dev->data->port_id : port_id->id;
> +	ret = mlx5_port_to_eswitch_info(port, &act_port_domain_id, NULL);
> +	if (ret)
> +		return rte_flow_error_set
> +				(error, -ret,
> +				 RTE_FLOW_ERROR_TYPE_ACTION_CONF, port_id,
> +				 "failed to obtain E-Switch port id for port");
> +	if (act_port_domain_id != esw_domain_id)
> +		return rte_flow_error_set
> +				(error, -ret,
> +				 RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> +				 "port does not belong to"
> +				 " E-Switch being configured");
> +	return 0;
> +}
>  
>  /**
>   * Find existing modify-header resource or create and register a new one.
> @@ -1759,11 +1914,29 @@ struct field_modify_info modify_tcp[] = {
>  					  RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
>  					  NULL,
>  					  "priority out of range");
> -	if (attributes->transfer)
> -		return rte_flow_error_set(error, ENOTSUP,
> -					  RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
> -					  NULL,
> -					  "transfer is not supported");
> +	if (attributes->transfer) {
> +		if (!priv->config.dv_esw_en)
> +			return rte_flow_error_set
> +				(error, ENOTSUP,
> +				 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
> +				 "E-Switch dr is not supported");
> +		if (!(priv->representor || priv->master))
> +			return rte_flow_error_set
> +				(error, EINVAL, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> +				 NULL, "E-Switch configurationd can only be"
> +				 " done by a master or a representor device");
> +		if (attributes->egress)
> +			return rte_flow_error_set
> +				(error, ENOTSUP,
> +				 RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, attributes,
> +				 "egress is not supported");
> +		if (attributes->group >= MLX5_MAX_TABLES_FDB)
> +			return rte_flow_error_set
> +				(error, EINVAL,
> +				 RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
> +				 NULL, "group must be smaller than "
> +				 RTE_STR(MLX5_MAX_FDB_TABLES));
> +	}
>  	if (!(attributes->egress ^ attributes->ingress))
>  		return rte_flow_error_set(error, ENOTSUP,
>  					  RTE_FLOW_ERROR_TYPE_ATTR, NULL,
> @@ -1812,6 +1985,13 @@ struct field_modify_info modify_tcp[] = {
>  		switch (items->type) {
>  		case RTE_FLOW_ITEM_TYPE_VOID:
>  			break;
> +		case RTE_FLOW_ITEM_TYPE_PORT_ID:
> +			ret = flow_dv_validate_item_port_id
> +					(dev, items, attr, item_flags, error);
> +			if (ret < 0)
> +				return ret;
> +			last_item |= MLX5_FLOW_ITEM_PORT_ID;
> +			break;
>  		case RTE_FLOW_ITEM_TYPE_ETH:
>  			ret = mlx5_flow_validate_item_eth(items, item_flags,
>  							  error);
> @@ -1943,6 +2123,17 @@ struct field_modify_info modify_tcp[] = {
>  		switch (actions->type) {
>  		case RTE_FLOW_ACTION_TYPE_VOID:
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_PORT_ID:
> +			ret = flow_dv_validate_action_port_id(dev,
> +							      action_flags,
> +							      actions,
> +							      attr,
> +							      error);
> +			if (ret)
> +				return ret;
> +			action_flags |= MLX5_FLOW_ACTION_PORT_ID;
> +			++actions_n;
> +			break;
>  		case RTE_FLOW_ACTION_TYPE_FLAG:
>  			ret = mlx5_flow_validate_action_flag(action_flags,
>  							     attr, error);
> @@ -2133,10 +2324,40 @@ struct field_modify_info modify_tcp[] = {
>  						  "action not supported");
>  		}
>  	}
> -	if (!(action_flags & MLX5_FLOW_FATE_ACTIONS) && attr->ingress)
> -		return rte_flow_error_set(error, EINVAL,
> -					  RTE_FLOW_ERROR_TYPE_ACTION, actions,
> -					  "no fate action is found");
> +	/* Eswitch has few restrictions on using items and actions */
> +	if (attr->transfer) {
> +		if (action_flags & MLX5_FLOW_ACTION_FLAG)
> +			return rte_flow_error_set(error, ENOTSUP,
> +						  RTE_FLOW_ERROR_TYPE_ACTION,
> +						  NULL,
> +						  "unsupported action FLAG");
> +		if (action_flags & MLX5_FLOW_ACTION_MARK)
> +			return rte_flow_error_set(error, ENOTSUP,
> +						  RTE_FLOW_ERROR_TYPE_ACTION,
> +						  NULL,
> +						  "unsupported action MARK");
> +		if (action_flags & MLX5_FLOW_ACTION_QUEUE)
> +			return rte_flow_error_set(error, ENOTSUP,
> +						  RTE_FLOW_ERROR_TYPE_ACTION,
> +						  NULL,
> +						  "unsupported action QUEUE");
> +		if (action_flags & MLX5_FLOW_ACTION_RSS)
> +			return rte_flow_error_set(error, ENOTSUP,
> +						  RTE_FLOW_ERROR_TYPE_ACTION,
> +						  NULL,
> +						  "unsupported action RSS");
> +		if (!(action_flags & MLX5_FLOW_FATE_ESWITCH_ACTIONS))
> +			return rte_flow_error_set(error, EINVAL,
> +						  RTE_FLOW_ERROR_TYPE_ACTION,
> +						  actions,
> +						  "no fate action is found");
> +	} else {
> +		if (!(action_flags & MLX5_FLOW_FATE_ACTIONS) && attr->ingress)
> +			return rte_flow_error_set(error, EINVAL,
> +						  RTE_FLOW_ERROR_TYPE_ACTION,
> +						  actions,
> +						  "no fate action is found");
> +	}
>  	return 0;
>  }
>  
> -- 
> 1.8.3.1
>