@@ -18,6 +18,39 @@ test_ioat_rawdev(void) { return TEST_SKIPPED; }
#include <rte_rawdev.h>
#include <rte_ioat_rawdev.h>
+static int
+run_ioat_tests(int dev_id)
+{
+#define IOAT_TEST_RINGSIZE 512
+ struct rte_ioat_rawdev_config p = { .ring_size = -1 };
+ struct rte_rawdev_info info = { .dev_private = &p };
+
+ rte_rawdev_info_get(dev_id, &info);
+ if (p.ring_size != 0) {
+ printf("Error, initial ring size is non-zero (%d)\n",
+ (int)p.ring_size);
+ return -1;
+ }
+
+ p.ring_size = IOAT_TEST_RINGSIZE;
+ if (rte_rawdev_configure(dev_id, &info) != 0) {
+ printf("Error with rte_rawdev_configure()\n");
+ return -1;
+ }
+ rte_rawdev_info_get(dev_id, &info);
+ if (p.ring_size != IOAT_TEST_RINGSIZE) {
+ printf("Error, ring size is not %d (%d)\n",
+ IOAT_TEST_RINGSIZE, (int)p.ring_size);
+ return -1;
+ }
+
+ if (rte_rawdev_start(dev_id) != 0) {
+ printf("Error with rte_rawdev_start()\n");
+ return -1;
+ }
+ return 0;
+}
+
static int
test_ioat_rawdev(void)
{
@@ -37,7 +70,7 @@ test_ioat_rawdev(void)
return TEST_SKIPPED;
}
- return 0;
+ return run_ioat_tests(i);
}
#endif /* RTE_LIBRTE_PMD_IOAT_RAWDEV */
@@ -79,3 +79,35 @@ the ``dev_private`` field in the ``rte_rawdev_info`` struct should either
be NULL, or else be set to point to a structure of type
``rte_ioat_rawdev_config``, in which case the size of the configured device
input ring will be returned in that structure.
+
+Device Configuration
+~~~~~~~~~~~~~~~~~~~~~
+
+Configuring an IOAT rawdev device is done using the
+``rte_rawdev_configure()`` API, which takes the same structure parameters
+as the, previously referenced, ``rte_rawdev_info_get()`` API. The main
+difference is that, because the parameter is used as input rather than
+output, the ``dev_private`` structure element cannot be NULL, and must
+point to a valid ``rte_ioat_rawdev_config`` structure, containing the ring
+size to be used by the device. The ring size must be a power of two,
+between 64 and 4096.
+
+The following code shows how the device is configured in
+``test_ioat_rawdev.c``:
+
+.. code-block:: C
+
+ #define IOAT_TEST_RINGSIZE 512
+ struct rte_ioat_rawdev_config p = { .ring_size = -1 };
+ struct rte_rawdev_info info = { .dev_private = &p };
+
+ /* ... */
+
+ p.ring_size = IOAT_TEST_RINGSIZE;
+ if (rte_rawdev_configure(dev_id, &info) != 0) {
+ printf("Error with rte_rawdev_configure()\n");
+ return -1;
+ }
+
+Once configured, the device can then be made ready for use by calling the
+``rte_rawdev_start()`` API.
@@ -24,6 +24,78 @@ static struct rte_pci_driver ioat_pmd_drv;
#define IOAT_PMD_ERR(fmt, args...) IOAT_PMD_LOG(ERR, fmt, ## args)
#define IOAT_PMD_WARN(fmt, args...) IOAT_PMD_LOG(WARNING, fmt, ## args)
+#define DESC_SZ sizeof(struct rte_ioat_desc)
+#define COMPLETION_SZ sizeof(__m128i)
+
+static int
+ioat_dev_configure(const struct rte_rawdev *dev, rte_rawdev_obj_t config)
+{
+ struct rte_ioat_rawdev_config *params = config;
+ struct rte_ioat_rawdev *ioat = dev->dev_private;
+ unsigned short i;
+
+ if (dev->started)
+ return -EBUSY;
+
+ if (params == NULL)
+ return -EINVAL;
+
+ if (params->ring_size > 4096 || params->ring_size < 64 ||
+ !rte_is_power_of_2(params->ring_size))
+ return -EINVAL;
+
+ ioat->ring_size = params->ring_size;
+ if (ioat->desc_ring != NULL) {
+ rte_free(ioat->desc_ring);
+ ioat->desc_ring = NULL;
+ }
+
+ /* allocate one block of memory for both descriptors
+ * and completion handles.
+ */
+ ioat->desc_ring = rte_zmalloc_socket(NULL,
+ (DESC_SZ + COMPLETION_SZ) * ioat->ring_size,
+ 0, /* alignment, default to 64Byte */
+ dev->device->numa_node);
+ if (ioat->desc_ring == NULL)
+ return -ENOMEM;
+ ioat->hdls = (void *)&ioat->desc_ring[ioat->ring_size];
+
+ ioat->ring_addr = rte_malloc_virt2iova(ioat->desc_ring);
+
+ /* configure descriptor ring - each one points to next */
+ for (i = 0; i < ioat->ring_size; i++) {
+ ioat->desc_ring[i].next_desc_addr = ioat->ring_addr +
+ (((i + 1) % ioat->ring_size) * DESC_SZ);
+ }
+
+ return 0;
+}
+
+static int
+ioat_dev_start(struct rte_rawdev *dev)
+{
+ struct rte_ioat_rawdev *ioat = dev->dev_private;
+
+ if (ioat->ring_size == 0 || ioat->desc_ring == NULL)
+ return -EBUSY;
+
+ /* inform hardware of where the descriptor ring is */
+ ioat->regs->chainaddr = ioat->ring_addr;
+ /* inform hardware of where to write the status/completions */
+ ioat->regs->chancmp = ioat->status_addr;
+
+ /* prime the status register to be set to the last element */
+ ioat->status = ioat->ring_addr + ((ioat->ring_size - 1) * DESC_SZ);
+ return 0;
+}
+
+static void
+ioat_dev_stop(struct rte_rawdev *dev)
+{
+ RTE_SET_USED(dev);
+}
+
static void
ioat_dev_info_get(struct rte_rawdev *dev, rte_rawdev_obj_t dev_info)
{
@@ -38,6 +110,9 @@ static int
ioat_rawdev_create(const char *name, struct rte_pci_device *dev)
{
static const struct rte_rawdev_ops ioat_rawdev_ops = {
+ .dev_configure = ioat_dev_configure,
+ .dev_start = ioat_dev_start,
+ .dev_stop = ioat_dev_stop,
.dev_info_get = ioat_dev_info_get,
};
@@ -47,9 +47,23 @@ struct rte_ioat_rawdev {
unsigned short ring_size;
struct rte_ioat_desc *desc_ring;
+ __m128i *hdls; /* completion handles for returning to user */
/* to report completions, the device will write status back here */
volatile uint64_t status __rte_cache_aligned;
};
+/**
+ * @internal
+ * Structure representing a descriptor for a copy operation
+ */
+struct rte_ioat_desc {
+ uint32_t xfer_size __rte_cache_aligned;
+ uint32_t desc_control;
+ phys_addr_t src_addr; /* 64 bits */
+ phys_addr_t dest_addr; /* 64 bits */
+ phys_addr_t next_desc_addr; /* 64 bits */
+ uint64_t op_type_specific[4];
+};
+
#endif