net/octeontx2: add tx desc status dev ops
Checks
Commit Message
From: Kiran Kumar K <kirankumark@marvell.com>
Adding support for tx descriptor status dev ops for octeontx2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
---
doc/guides/nics/features/octeontx2.ini | 1 +
drivers/net/octeontx2/otx2_ethdev.c | 1 +
drivers/net/octeontx2/otx2_ethdev.h | 1 +
drivers/net/octeontx2/otx2_ethdev_ops.c | 38 ++++++++++++++++++++++++-
4 files changed, 40 insertions(+), 1 deletion(-)
@@ -39,6 +39,7 @@ Packet type parsing = Y
Timesync = Y
Timestamp offload = Y
Rx descriptor status = Y
+Tx descriptor status = Y
Basic stats = Y
Stats per queue = Y
Extended stats = Y
@@ -1646,6 +1646,7 @@ static const struct eth_dev_ops otx2_eth_dev_ops = {
.rx_queue_count = otx2_nix_rx_queue_count,
.rx_descriptor_done = otx2_nix_rx_descriptor_done,
.rx_descriptor_status = otx2_nix_rx_descriptor_status,
+ .tx_descriptor_status = otx2_nix_tx_descriptor_status,
.tx_done_cleanup = otx2_nix_tx_done_cleanup,
.pool_ops_supported = otx2_nix_pool_ops_supported,
.filter_ctrl = otx2_nix_dev_filter_ctrl,
@@ -377,6 +377,7 @@ uint32_t otx2_nix_rx_queue_count(struct rte_eth_dev *eth_dev, uint16_t qidx);
int otx2_nix_tx_done_cleanup(void *txq, uint32_t free_cnt);
int otx2_nix_rx_descriptor_done(void *rxq, uint16_t offset);
int otx2_nix_rx_descriptor_status(void *rx_queue, uint16_t offset);
+int otx2_nix_tx_descriptor_status(void *tx_queue, uint16_t offset);
void otx2_nix_promisc_config(struct rte_eth_dev *eth_dev, int en);
void otx2_nix_promisc_enable(struct rte_eth_dev *eth_dev);
@@ -274,7 +274,7 @@ otx2_nix_rx_descriptor_status(void *rx_queue, uint16_t offset)
struct otx2_eth_rxq *rxq = rx_queue;
uint32_t head, tail;
- if (rxq->qlen >= offset)
+ if (rxq->qlen <= offset)
return -EINVAL;
nix_rx_head_tail_get(otx2_eth_pmd_priv(rxq->eth_dev),
@@ -286,6 +286,42 @@ otx2_nix_rx_descriptor_status(void *rx_queue, uint16_t offset)
return RTE_ETH_RX_DESC_AVAIL;
}
+static void
+nix_tx_head_tail_get(struct otx2_eth_dev *dev,
+ uint32_t *head, uint32_t *tail, uint16_t queue_idx)
+{
+ uint64_t reg, val;
+
+ if (head == NULL || tail == NULL)
+ return;
+
+ reg = (((uint64_t)queue_idx) << 32);
+ val = otx2_atomic64_add_nosync(reg, (int64_t *)
+ (dev->base + NIX_LF_SQ_OP_STATUS));
+ if (val & OP_ERR)
+ val = 0;
+
+ *tail = (uint32_t)((val >> 28) & 0x3F);
+ *head = (uint32_t)((val >> 20) & 0x3F);
+}
+
+int
+otx2_nix_tx_descriptor_status(void *tx_queue, uint16_t offset)
+{
+ struct otx2_eth_txq *txq = tx_queue;
+ uint32_t head, tail;
+
+ if (txq->nb_sqb_bufs <= offset)
+ return -EINVAL;
+
+ nix_tx_head_tail_get(txq->dev, &head, &tail, txq->sq);
+
+ if (nix_offset_has_packet(head, tail, offset))
+ return RTE_ETH_TX_DESC_DONE;
+ else
+ return RTE_ETH_TX_DESC_FULL;
+}
+
/* It is a NOP for octeontx2 as HW frees the buffer on xmit */
int
otx2_nix_tx_done_cleanup(void *txq, uint32_t free_cnt)