[2/5] baseband/fpga_lte_fec: align naming to other bbdevs
Checks
Commit Message
The fpga_lte_fec is the only bbdev driver that does not use bbdev in the
name, so modify it to keep consistency with the other bbdev drivers. This
will then allow later simplification due to all drivers using the same
basic naming format.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
app/test-bbdev/meson.build | 6 +++---
app/test-bbdev/test_bbdev_perf.c | 6 +++---
config/common_base | 2 +-
doc/guides/bbdevs/fpga_lte_fec.rst | 2 +-
drivers/baseband/Makefile | 2 +-
drivers/baseband/fpga_lte_fec/Makefile | 6 +++---
mk/rte.app.mk | 2 +-
7 files changed, 13 insertions(+), 13 deletions(-)
@@ -7,6 +7,6 @@ sources = files('main.c',
'test_bbdev_vector.c')
allow_experimental_apis = true
deps += ['bbdev', 'bus_vdev']
-if dpdk_conf.has('RTE_LIBRTE_PMD_FPGA_LTE_FEC')
- deps += ['bbdev_fpga_lte_fec']
-endif
\ No newline at end of file
+if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC')
+ deps += ['pmd_bbdev_fpga_lte_fec']
+endif
@@ -18,7 +18,7 @@
#include <rte_hexdump.h>
#include <rte_interrupts.h>
-#ifdef RTE_LIBRTE_PMD_FPGA_LTE_FEC
+#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC
#include <fpga_lte_fec.h>
#endif
@@ -30,7 +30,7 @@
#define MAX_QUEUES RTE_MAX_LCORE
#define TEST_REPETITIONS 1000
-#ifdef RTE_LIBRTE_PMD_FPGA_LTE_FEC
+#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC
#define FPGA_PF_DRIVER_NAME ("intel_fpga_lte_fec_pf")
#define FPGA_VF_DRIVER_NAME ("intel_fpga_lte_fec_vf")
#define VF_UL_QUEUE_VALUE 4
@@ -520,7 +520,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info,
* if '-i' flag is set and using fpga device
*/
#ifndef RTE_BUILD_SHARED_LIB
-#ifdef RTE_LIBRTE_PMD_FPGA_LTE_FEC
+#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC
if ((get_init_device() == true) &&
(!strcmp(info->drv.driver_name, FPGA_PF_DRIVER_NAME))) {
struct fpga_lte_fec_conf conf;
@@ -556,7 +556,7 @@ CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
-CONFIG_RTE_LIBRTE_PMD_FPGA_LTE_FEC=y
+CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
@@ -52,7 +52,7 @@ Installation
Section 3 of the DPDK manual provides instuctions on installing and compiling DPDK. The
default set of bbdev compile flags may be found in config/common_base, where for example
-the flag to build the FPGA LTE FEC device, ``CONFIG_RTE_LIBRTE_PMD_FPGA_LTE_FEC``, is already
+the flag to build the FPGA LTE FEC device, ``CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC``, is already
set. It is assumed DPDK has been compiled using for instance:
.. code-block:: console
@@ -10,7 +10,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL) += null
DEPDIRS-null = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += turbo_sw
DEPDIRS-turbo_sw = $(core-libs)
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_FPGA_LTE_FEC) += fpga_lte_fec
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC) += fpga_lte_fec
DEPDIRS-fpga_lte_fec = $(core-libs)
include $(RTE_SDK)/mk/rte.subdir.mk
@@ -4,7 +4,7 @@
include $(RTE_SDK)/mk/rte.vars.mk
# library name
-LIB = librte_pmd_fpga_lte_fec.a
+LIB = librte_pmd_bbdev_fpga_lte_fec.a
# build flags
CFLAGS += -DALLOW_EXPERIMENTAL_API
@@ -21,9 +21,9 @@ EXPORT_MAP := rte_pmd_bbdev_fpga_lte_fec_version.map
LIBABIVER := 1
# library source files
-SRCS-$(CONFIG_RTE_LIBRTE_PMD_FPGA_LTE_FEC) += fpga_lte_fec.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC) += fpga_lte_fec.c
# export include files
-SYMLINK-$(CONFIG_RTE_LIBRTE_PMD_FPGA_LTE_FEC)-include += fpga_lte_fec.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC)-include += fpga_lte_fec.h
include $(RTE_SDK)/mk/rte.lib.mk
@@ -226,7 +226,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += -lrte_pmd_netvsc
ifeq ($(CONFIG_RTE_LIBRTE_BBDEV),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL) += -lrte_pmd_bbdev_null
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FPGA_LTE_FEC) += -lrte_pmd_fpga_lte_fec
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC) += -lrte_pmd_bbdev_fpga_lte_fec
# TURBO SOFTWARE PMD is dependent on the FLEXRAN library
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += -lrte_pmd_bbdev_turbo_sw