[v2] app/testpmd: fix CRC strip command failure
Checks
Commit Message
This patch fixed the bug that a failure appeared when config
rx_offload crc_strip using command "port config all crc-strip
on|off". The reason is that this command was removed in Commit
e5db17a1e54e. The current command is "port config <port_id>
rx_offload keep_crc on|off" instead.
In this patch, some codes left over about 'crc_strip' are
removed to make the current command clearer.
Fixes: e5db17a1e54e ("app/testpmd: remove duplicated Rx offload commands")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
---
app/test-pmd/cmdline.c | 12 ++++++------
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 4 ++--
2 files changed, 8 insertions(+), 8 deletions(-)
Comments
> -----Original Message-----
> From: Xu, Ting
> Sent: Tuesday, October 15, 2019 10:14 AM
> To: dev@dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Wu, Jingjing
> <jingjing.wu@intel.com>; Iremonger, Bernard
> <bernard.iremonger@intel.com>; Mcnamara, John
> <john.mcnamara@intel.com>; Kovacevic, Marko
> <marko.kovacevic@intel.com>; stable@dpdk.org
> Subject: [PATCH v2] app/testpmd: fix CRC strip command failure
>
> This patch fixed the bug that a failure appeared when config rx_offload
> crc_strip using command "port config all crc-strip
> on|off". The reason is that this command was removed in Commit
> e5db17a1e54e. The current command is "port config <port_id> rx_offload
> keep_crc on|off" instead.
>
> In this patch, some codes left over about 'crc_strip' are removed to make the
> current command clearer.
>
> Fixes: e5db17a1e54e ("app/testpmd: remove duplicated Rx offload
> commands")
> Cc: stable@dpdk.org
>
> Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked by: Bernard Iremonger <bernard.iremonger@intel.com>
On 10/15/2019 10:40 AM, Iremonger, Bernard wrote:
>> -----Original Message-----
>> From: Xu, Ting
>> Sent: Tuesday, October 15, 2019 10:14 AM
>> To: dev@dpdk.org
>> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Wu, Jingjing
>> <jingjing.wu@intel.com>; Iremonger, Bernard
>> <bernard.iremonger@intel.com>; Mcnamara, John
>> <john.mcnamara@intel.com>; Kovacevic, Marko
>> <marko.kovacevic@intel.com>; stable@dpdk.org
>> Subject: [PATCH v2] app/testpmd: fix CRC strip command failure
>>
>> This patch fixed the bug that a failure appeared when config rx_offload
>> crc_strip using command "port config all crc-strip
>> on|off". The reason is that this command was removed in Commit
>> e5db17a1e54e. The current command is "port config <port_id> rx_offload
>> keep_crc on|off" instead.
>>
>> In this patch, some codes left over about 'crc_strip' are removed to make the
>> current command clearer.
>>
>> Fixes: e5db17a1e54e ("app/testpmd: remove duplicated Rx offload
>> commands")
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: Ting Xu <ting.xu@intel.com>
>
> Acked by: Bernard Iremonger <bernard.iremonger@intel.com>
>
Applied to dpdk-next-net/master, thanks.
@@ -860,7 +860,7 @@ static void cmd_help_long_parsed(void *parsed_result,
"port config <port_id> rx_offload vlan_strip|"
"ipv4_cksum|udp_cksum|tcp_cksum|tcp_lro|qinq_strip|"
"outer_ipv4_cksum|macsec_strip|header_split|"
- "vlan_filter|vlan_extend|jumbo_frame|crc_strip|"
+ "vlan_filter|vlan_extend|jumbo_frame|"
"scatter|timestamp|security|keep_crc on|off\n"
" Enable or disable a per port Rx offloading"
" on all Rx queues of a port\n\n"
@@ -868,7 +868,7 @@ static void cmd_help_long_parsed(void *parsed_result,
"port (port_id) rxq (queue_id) rx_offload vlan_strip|"
"ipv4_cksum|udp_cksum|tcp_cksum|tcp_lro|qinq_strip|"
"outer_ipv4_cksum|macsec_strip|header_split|"
- "vlan_filter|vlan_extend|jumbo_frame|crc_strip|"
+ "vlan_filter|vlan_extend|jumbo_frame|"
"scatter|timestamp|security|keep_crc on|off\n"
" Enable or disable a per queue Rx offloading"
" only on a specific Rx queue\n\n"
@@ -18080,7 +18080,7 @@ cmdline_parse_token_string_t cmd_config_per_port_rx_offload_result_offload =
offload, "vlan_strip#ipv4_cksum#udp_cksum#tcp_cksum#tcp_lro#"
"qinq_strip#outer_ipv4_cksum#macsec_strip#"
"header_split#vlan_filter#vlan_extend#jumbo_frame#"
- "crc_strip#scatter#timestamp#security#keep_crc");
+ "scatter#timestamp#security#keep_crc");
cmdline_parse_token_string_t cmd_config_per_port_rx_offload_result_on_off =
TOKEN_STRING_INITIALIZER
(struct cmd_config_per_port_rx_offload_result,
@@ -18160,7 +18160,7 @@ cmdline_parse_inst_t cmd_config_per_port_rx_offload = {
.help_str = "port config <port_id> rx_offload vlan_strip|ipv4_cksum|"
"udp_cksum|tcp_cksum|tcp_lro|qinq_strip|outer_ipv4_cksum|"
"macsec_strip|header_split|vlan_filter|vlan_extend|"
- "jumbo_frame|crc_strip|scatter|timestamp|security|keep_crc "
+ "jumbo_frame|scatter|timestamp|security|keep_crc "
"on|off",
.tokens = {
(void *)&cmd_config_per_port_rx_offload_result_port,
@@ -18210,7 +18210,7 @@ cmdline_parse_token_string_t cmd_config_per_queue_rx_offload_result_offload =
offload, "vlan_strip#ipv4_cksum#udp_cksum#tcp_cksum#tcp_lro#"
"qinq_strip#outer_ipv4_cksum#macsec_strip#"
"header_split#vlan_filter#vlan_extend#jumbo_frame#"
- "crc_strip#scatter#timestamp#security#keep_crc");
+ "scatter#timestamp#security#keep_crc");
cmdline_parse_token_string_t cmd_config_per_queue_rx_offload_result_on_off =
TOKEN_STRING_INITIALIZER
(struct cmd_config_per_queue_rx_offload_result,
@@ -18266,7 +18266,7 @@ cmdline_parse_inst_t cmd_config_per_queue_rx_offload = {
"vlan_strip|ipv4_cksum|"
"udp_cksum|tcp_cksum|tcp_lro|qinq_strip|outer_ipv4_cksum|"
"macsec_strip|header_split|vlan_filter|vlan_extend|"
- "jumbo_frame|crc_strip|scatter|timestamp|security|keep_crc "
+ "jumbo_frame|scatter|timestamp|security|keep_crc "
"on|off",
.tokens = {
(void *)&cmd_config_per_queue_rx_offload_result_port,
@@ -1670,7 +1670,7 @@ Enable or disable a per port Rx offloading on all Rx queues of a port::
vlan_strip, ipv4_cksum, udp_cksum, tcp_cksum, tcp_lro,
qinq_strip, outer_ipv4_cksum, macsec_strip,
header_split, vlan_filter, vlan_extend, jumbo_frame,
- crc_strip, scatter, timestamp, security, keep_crc
+ scatter, timestamp, security, keep_crc
This command should be run when the port is stopped, or else it will fail.
@@ -1685,7 +1685,7 @@ Enable or disable a per queue Rx offloading only on a specific Rx queue::
vlan_strip, ipv4_cksum, udp_cksum, tcp_cksum, tcp_lro,
qinq_strip, outer_ipv4_cksum, macsec_strip,
header_split, vlan_filter, vlan_extend, jumbo_frame,
- crc_strip, scatter, timestamp, security, keep_crc
+ scatter, timestamp, security, keep_crc
This command should be run when the port is stopped, or else it will fail.