[v3,5/5] doc: update examples output in FreeBSD GSG
Checks
Commit Message
The output of running the helloworld example on FreeBSD was a little
out-of-date and can be shortened by using the latest version of DPDK.
Update appropriately.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
doc/guides/freebsd_gsg/install_from_ports.rst | 56 ++++++++-----------
1 file changed, 22 insertions(+), 34 deletions(-)
@@ -84,48 +84,36 @@ compiled and run as below:
INSTALL-APP helloworld
INSTALL-MAP helloworld.map
- sudo ./build/helloworld -l 0-3 -n 2
-
- EAL: Contigmem driver has 2 buffers, each of size 1GB
+ sudo ./build//helloworld -l 0-3
EAL: Sysctl reports 8 cpus
- EAL: Detected lcore 0
- EAL: Detected lcore 1
- EAL: Detected lcore 2
- EAL: Detected lcore 3
- EAL: Support maximum 64 logical core(s) by configuration.
- EAL: Detected 4 lcore(s)
- EAL: Setting up physically contiguous memory...
- EAL: Mapped memory segment 1 @ 0x802400000: len 1073741824
- EAL: Mapped memory segment 2 @ 0x842400000: len 1073741824
- EAL: WARNING: clock_gettime cannot use CLOCK_MONOTONIC_RAW and HPET
- is not available - clock timings may be less accurate.
- EAL: TSC frequency is ~3569023 KHz
- EAL: PCI scan found 24 devices
- EAL: Master core 0 is ready (tid=0x802006400)
- EAL: Core 1 is ready (tid=0x802006800)
- EAL: Core 3 is ready (tid=0x802007000)
- EAL: Core 2 is ready (tid=0x802006c00)
+ EAL: Detected 8 lcore(s)
+ EAL: Detected 1 NUMA nodes
+ EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
+ EAL: Selected IOVA mode 'PA'
+ EAL: Contigmem driver has 2 buffers, each of size 1GB
+ EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x180000000, len 1073741824
+ EAL: Mapped memory segment 1 @ 0x1080000000: physaddr:0x1c0000000, len 1073741824
+ EAL: PCI device 0000:00:19.0 on NUMA socket 0
+ EAL: probe driver: 8086:153b net_e1000_em
+ EAL: 0000:00:19.0 not managed by UIO driver, skipping
EAL: PCI device 0000:01:00.0 on NUMA socket 0
- EAL: probe driver: 8086:10fb rte_ixgbe_pmd
- EAL: PCI memory mapped at 0x80074a000
- EAL: PCI memory mapped at 0x8007ca000
+ EAL: probe driver: 8086:1572 net_i40e
+ EAL: 0000:01:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:01:00.1 on NUMA socket 0
- EAL: probe driver: 8086:10fb rte_ixgbe_pmd
- EAL: PCI memory mapped at 0x8007ce000
- EAL: PCI memory mapped at 0x80084e000
- EAL: PCI device 0000:02:00.0 on NUMA socket 0
- EAL: probe driver: 8086:10fb rte_ixgbe_pmd
- EAL: PCI memory mapped at 0x800852000
- EAL: PCI memory mapped at 0x8008d2000
- EAL: PCI device 0000:02:00.1 on NUMA socket 0
- EAL: probe driver: 8086:10fb rte_ixgbe_pmd
- EAL: PCI memory mapped at 0x801b3f000
- EAL: PCI memory mapped at 0x8008d6000
+ EAL: probe driver: 8086:1572 net_i40e
+ EAL: 0000:01:00.1 not managed by UIO driver, skipping
+ EAL: PCI device 0000:01:00.2 on NUMA socket 0
+ EAL: probe driver: 8086:1572 net_i40e
+ EAL: 0000:01:00.2 not managed by UIO driver, skipping
+ EAL: PCI device 0000:01:00.3 on NUMA socket 0
+ EAL: probe driver: 8086:1572 net_i40e
+ EAL: 0000:01:00.3 not managed by UIO driver, skipping
hello from core 1
hello from core 2
hello from core 3
hello from core 0
+
.. note::
To run a DPDK process as a non-root user, adjust the permissions on