> -----Original Message-----
> From: Guo, Jia <jia.guo@intel.com>
> Sent: Wednesday, April 22, 2020 2:03 AM
> To: Iremonger, Bernard <bernard.iremonger@intel.com>;
> orika@mellanox.com; Lu, Wenzhuo <wenzhuo.lu@intel.com>;
> stephen@networkplumber.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Wu,
> Jingjing <jingjing.wu@intel.com>
> Cc: Xing, Beilei <beilei.xing@intel.com>; Ye, Xiaolong
> <xiaolong.ye@intel.com>; dev@dpdk.org; Cao, Yahui
> <yahui.cao@intel.com>; Su, Simei <simei.su@intel.com>; Guo, Jia
> <jia.guo@intel.com>
> Subject: [dpdk-dev v8 3/3] app/testpmd: add new types to RSS hash
> commands
>
> Add some new types, such as eth/l2-src-only/l2-dst-only/svlan/cvlan/
> l2tpv3/esp/ah/pfcp types into RSS hash commands, it could be used to
> configure these rss input set by cmdline.
>
> Example flow commands was:
> testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip / end \
> actions rss types l2tpv3 end key_len 0 queues end / end
>
> port config commands was:
> testpmd>port config all rss l2tpv3
>
> Signed-off-by: Jeff Guo <jia.guo@intel.com>
> Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
@@ -2270,9 +2270,14 @@ cmd_config_rss_parsed(void *parsed_result,
int ret;
if (!strcmp(res->value, "all"))
- rss_conf.rss_hf = ETH_RSS_IP | ETH_RSS_TCP |
- ETH_RSS_UDP | ETH_RSS_SCTP |
- ETH_RSS_L2_PAYLOAD;
+ rss_conf.rss_hf = ETH_RSS_ETH | ETH_RSS_VLAN | ETH_RSS_IP |
+ ETH_RSS_TCP | ETH_RSS_UDP | ETH_RSS_SCTP |
+ ETH_RSS_L2_PAYLOAD | ETH_RSS_L2TPV3 | ETH_RSS_ESP |
+ ETH_RSS_AH | ETH_RSS_PFCP;
+ else if (!strcmp(res->value, "eth"))
+ rss_conf.rss_hf = ETH_RSS_ETH;
+ else if (!strcmp(res->value, "vlan"))
+ rss_conf.rss_hf = ETH_RSS_VLAN;
else if (!strcmp(res->value, "ip"))
rss_conf.rss_hf = ETH_RSS_IP;
else if (!strcmp(res->value, "udp"))
@@ -2299,6 +2304,18 @@ cmd_config_rss_parsed(void *parsed_result,
rss_conf.rss_hf = ETH_RSS_L4_SRC_ONLY;
else if (!strcmp(res->value, "l4-dst-only"))
rss_conf.rss_hf = ETH_RSS_L4_DST_ONLY;
+ else if (!strcmp(res->value, "l2-src-only"))
+ rss_conf.rss_hf = ETH_RSS_L2_SRC_ONLY;
+ else if (!strcmp(res->value, "l2-dst-only"))
+ rss_conf.rss_hf = ETH_RSS_L2_DST_ONLY;
+ else if (!strcmp(res->value, "l2tpv3"))
+ rss_conf.rss_hf = ETH_RSS_L2TPV3;
+ else if (!strcmp(res->value, "esp"))
+ rss_conf.rss_hf = ETH_RSS_ESP;
+ else if (!strcmp(res->value, "ah"))
+ rss_conf.rss_hf = ETH_RSS_AH;
+ else if (!strcmp(res->value, "pfcp"))
+ rss_conf.rss_hf = ETH_RSS_PFCP;
else if (!strcmp(res->value, "none"))
rss_conf.rss_hf = 0;
else if (!strcmp(res->value, "default"))
@@ -2359,7 +2376,8 @@ cmdline_parse_inst_t cmd_config_rss = {
.f = cmd_config_rss_parsed,
.data = NULL,
.help_str = "port config all rss "
- "all|default|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|vxlan-gpe|none|<flowtype_id>",
+ "all|default|eth|vlan|ip|tcp|udp|sctp|ether|port|vxlan|geneve|"
+ "nvgre|vxlan-gpe|l2tpv3|esp|ah|pfcp|none|<flowtype_id>",
.tokens = {
(void *)&cmd_config_rss_port,
(void *)&cmd_config_rss_keyword,
@@ -2469,7 +2487,9 @@ cmdline_parse_token_string_t cmd_config_rss_hash_key_rss_type =
"ipv4-other#ipv6#ipv6-frag#ipv6-tcp#ipv6-udp#"
"ipv6-sctp#ipv6-other#l2-payload#ipv6-ex#"
"ipv6-tcp-ex#ipv6-udp-ex#"
- "l3-src-only#l3-dst-only#l4-src-only#l4-dst-only");
+ "l3-src-only#l3-dst-only#l4-src-only#l4-dst-only#"
+ "l2-src-only#l2-dst-only#s-vlan#c-vlan#"
+ "l2tpv3#esp#ah#pfcp");
cmdline_parse_token_string_t cmd_config_rss_hash_key_value =
TOKEN_STRING_INITIALIZER(struct cmd_config_rss_hash_key, key, NULL);
@@ -2480,7 +2500,9 @@ cmdline_parse_inst_t cmd_config_rss_hash_key = {
"ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|"
"ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|"
"l2-payload|ipv6-ex|ipv6-tcp-ex|ipv6-udp-ex|"
- "l3-src-only|l3-dst-only|l4-src-only|l4-dst-only "
+ "l3-src-only|l3-dst-only|l4-src-only|l4-dst-only|"
+ "l2-src-only|l2-dst-only|s-vlan|c-vlan|"
+ "l2tpv3|esp|ah|pfcp "
"<string of hex digits (variable length, NIC dependent)>",
.tokens = {
(void *)&cmd_config_rss_hash_key_port,
@@ -75,10 +75,16 @@ static const struct {
};
const struct rss_type_info rss_type_table[] = {
- { "all", ETH_RSS_IP | ETH_RSS_TCP |
- ETH_RSS_UDP | ETH_RSS_SCTP |
- ETH_RSS_L2_PAYLOAD },
+ { "all", ETH_RSS_ETH | ETH_RSS_VLAN | ETH_RSS_IP | ETH_RSS_TCP |
+ ETH_RSS_UDP | ETH_RSS_SCTP | ETH_RSS_L2_PAYLOAD |
+ ETH_RSS_L2TPV3 | ETH_RSS_ESP | ETH_RSS_AH | ETH_RSS_PFCP},
{ "none", 0 },
+ { "eth", ETH_RSS_ETH },
+ { "l2-src-only", ETH_RSS_L2_SRC_ONLY },
+ { "l2-dst-only", ETH_RSS_L2_DST_ONLY },
+ { "vlan", ETH_RSS_VLAN },
+ { "s-vlan", ETH_RSS_S_VLAN },
+ { "c-vlan", ETH_RSS_C_VLAN },
{ "ipv4", ETH_RSS_IPV4 },
{ "ipv4-frag", ETH_RSS_FRAG_IPV4 },
{ "ipv4-tcp", ETH_RSS_NONFRAG_IPV4_TCP },
@@ -110,6 +116,8 @@ const struct rss_type_info rss_type_table[] = {
{ "l4-dst-only", ETH_RSS_L4_DST_ONLY },
{ "esp", ETH_RSS_ESP },
{ "ah", ETH_RSS_AH },
+ { "l2tpv3", ETH_RSS_L2TPV3 },
+ { "pfcp", ETH_RSS_PFCP },
{ NULL, 0 },
};
@@ -2199,12 +2199,14 @@ port config - RSS
Set the RSS (Receive Side Scaling) mode on or off::
- testpmd> port config all rss (all|default|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|vxlan-gpe|none)
+ testpmd> port config all rss (all|default|eth|vlan|ip|tcp|udp|sctp|ether|port|vxlan|geneve|nvgre|vxlan-gpe|l2tpv3|esp|ah|pfcp|none)
RSS is on by default.
-The ``all`` option is equivalent to ip|tcp|udp|sctp|ether.
+The ``all`` option is equivalent to eth|vlan|ip|tcp|udp|sctp|ether|l2tpv3|esp|ah|pfcp.
+
The ``default`` option enables all supported RSS types reported by device info.
+
The ``none`` option is equivalent to the ``--disable-rss`` command-line option.
port config - RSS Reta