[3/3,v3] app/testpmd: support hardware offload to drop error packets
Checks
Commit Message
From: Nipun Gupta <nipun.gupta@nxp.com>
With DEV_RX_OFFLOAD_ERR_PKT_DROP now defined as an offload
capability, and separate DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL capability
to drop all error packets in hardware, testpmd showcases this
with a new added configuration option 'enable-hw-drop-err-all'.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
---
app/test-pmd/parameters.c | 7 +++++++
app/test-pmd/testpmd.c | 8 ++++++++
app/test-pmd/testpmd.h | 1 +
doc/guides/testpmd_app_ug/run_app.rst | 4 ++++
4 files changed, 20 insertions(+)
Comments
Regards,
Asaf Penso
>-----Original Message-----
>From: nipun.gupta@nxp.com <nipun.gupta@nxp.com>
>Sent: Friday, October 9, 2020 4:14 PM
>To: dev@dpdk.org
>Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>;
>ferruh.yigit@intel.com; arybchenko@solarflare.com;
>hemant.agrawal@nxp.com; sachin.saxena@nxp.com; rohit.raj@nxp.com;
>jerinjacobk@gmail.com; stephen@networkplumber.org; Asaf Penso
><asafp@nvidia.com>; Nipun Gupta <nipun.gupta@nxp.com>
>Subject: [PATCH 3/3 v3] app/testpmd: support hardware offload to drop error
>packets
>
>From: Nipun Gupta <nipun.gupta@nxp.com>
>
>With DEV_RX_OFFLOAD_ERR_PKT_DROP now defined as an offload
>capability, and separate DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL capability to
>drop all error packets in hardware, testpmd showcases this with a new added
>configuration option 'enable-hw-drop-err-all'.
>
>Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-By: Asaf Penso <asafp@nvidia.com>
>---
> app/test-pmd/parameters.c | 7 +++++++
> app/test-pmd/testpmd.c | 8 ++++++++
> app/test-pmd/testpmd.h | 1 +
> doc/guides/testpmd_app_ug/run_app.rst | 4 ++++
> 4 files changed, 20 insertions(+)
>
>diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index
>1ead59579..508612426 100644
>--- a/app/test-pmd/parameters.c
>+++ b/app/test-pmd/parameters.c
>@@ -142,6 +142,7 @@ usage(char* progname)
> printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n");
> printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n");
> printf(" --enable-hw-qinq-strip: enable hardware qinq strip.\n");
>+ printf(" --enable-hw-drop-err-all: enable hardware packet drop for
>+all error packets.\n");
> printf(" --enable-drop-en: enable per queue packet drop.\n");
> printf(" --disable-rss: disable rss.\n");
> printf(" --port-topology=<paired|chained|loop>: set port topology
>(paired "
>@@ -631,6 +632,7 @@ launch_args_parse(int argc, char** argv)
> { "enable-hw-vlan-strip", 0, 0, 0 },
> { "enable-hw-vlan-extend", 0, 0, 0 },
> { "enable-hw-qinq-strip", 0, 0, 0 },
>+ { "enable-hw-drop-err-all", 0, 0, 0 },
> { "enable-drop-en", 0, 0, 0 },
> { "disable-rss", 0, 0, 0 },
> { "port-topology", 1, 0, 0 },
>@@ -1283,6 +1285,11 @@ launch_args_parse(int argc, char** argv)
> rmv_interrupt = 0;
> if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
> flow_isolate_all = 1;
>+ if (!strcmp(lgopts[opt_idx].name,
>+ "enable-hw-drop-err-all")) {
>+ rx_err_pkt_drop_all = 1;
>+ }
>+
> if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
> char *end = NULL;
> n = strtoull(optarg, &end, 16);
>diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
>ccba71c07..c9e7397e6 100644
>--- a/app/test-pmd/testpmd.c
>+++ b/app/test-pmd/testpmd.c
>@@ -359,6 +359,11 @@ uint8_t lsc_interrupt = 1; /* enabled by default */
> */
> uint8_t rmv_interrupt = 1; /* enabled by default */
>
>+/*
>+ * Drop all RX error packets on HW itself.
>+ */
>+uint8_t rx_err_pkt_drop_all = 0; /* disabled by default */
>+
> uint8_t hot_plug = 0; /**< hotplug disabled by default. */
>
> /* After attach, port setup is called on event or by iterator */ @@ -3359,6
>+3364,9 @@ init_port_config(void)
> (rte_eth_devices[pid].data->dev_flags &
> RTE_ETH_DEV_INTR_RMV))
> port->dev_conf.intr_conf.rmv = 1;
>+
>+ if (rx_err_pkt_drop_all)
>+ port->dev_conf.err_pkt_drop_conf.all = 1;
> }
> }
>
>diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index
>c7e7e41a9..eab154ed4 100644
>--- a/app/test-pmd/testpmd.h
>+++ b/app/test-pmd/testpmd.h
>@@ -314,6 +314,7 @@ extern uint8_t no_device_start; /**<set by "--disable-
>device-start" parameter */ extern volatile int test_done; /* stop packet
>forwarding when set to 1. */ extern uint8_t lsc_interrupt; /**< disabled by "-
>-no-lsc-interrupt" parameter */ extern uint8_t rmv_interrupt; /**< disabled
>by "--no-rmv-interrupt" parameter */
>+extern uint8_t rx_err_pkt_drop_all; /**< enabled by
>+"--enable-hw-drop-err-all" parameter */
> extern uint32_t event_print_mask;
> /**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
>extern bool setup_on_probe_event; /**< disabled by port setup-on iterator
>*/ diff --git a/doc/guides/testpmd_app_ug/run_app.rst
>b/doc/guides/testpmd_app_ug/run_app.rst
>index e2539f693..20f2f8083 100644
>--- a/doc/guides/testpmd_app_ug/run_app.rst
>+++ b/doc/guides/testpmd_app_ug/run_app.rst
>@@ -213,6 +213,10 @@ The command line options are:
>
> Enable hardware QINQ strip.
>
>+* ``--enable-hw-drop-err-all``
>+
>+ Enable hardware packet drop for any error packets
>+
> * ``--enable-drop-en``
>
> Enable per-queue packet drop for packets with no descriptors.
>--
>2.17.1
@@ -142,6 +142,7 @@ usage(char* progname)
printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n");
printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n");
printf(" --enable-hw-qinq-strip: enable hardware qinq strip.\n");
+ printf(" --enable-hw-drop-err-all: enable hardware packet drop for all error packets.\n");
printf(" --enable-drop-en: enable per queue packet drop.\n");
printf(" --disable-rss: disable rss.\n");
printf(" --port-topology=<paired|chained|loop>: set port topology (paired "
@@ -631,6 +632,7 @@ launch_args_parse(int argc, char** argv)
{ "enable-hw-vlan-strip", 0, 0, 0 },
{ "enable-hw-vlan-extend", 0, 0, 0 },
{ "enable-hw-qinq-strip", 0, 0, 0 },
+ { "enable-hw-drop-err-all", 0, 0, 0 },
{ "enable-drop-en", 0, 0, 0 },
{ "disable-rss", 0, 0, 0 },
{ "port-topology", 1, 0, 0 },
@@ -1283,6 +1285,11 @@ launch_args_parse(int argc, char** argv)
rmv_interrupt = 0;
if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
flow_isolate_all = 1;
+ if (!strcmp(lgopts[opt_idx].name,
+ "enable-hw-drop-err-all")) {
+ rx_err_pkt_drop_all = 1;
+ }
+
if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
char *end = NULL;
n = strtoull(optarg, &end, 16);
@@ -359,6 +359,11 @@ uint8_t lsc_interrupt = 1; /* enabled by default */
*/
uint8_t rmv_interrupt = 1; /* enabled by default */
+/*
+ * Drop all RX error packets on HW itself.
+ */
+uint8_t rx_err_pkt_drop_all = 0; /* disabled by default */
+
uint8_t hot_plug = 0; /**< hotplug disabled by default. */
/* After attach, port setup is called on event or by iterator */
@@ -3359,6 +3364,9 @@ init_port_config(void)
(rte_eth_devices[pid].data->dev_flags &
RTE_ETH_DEV_INTR_RMV))
port->dev_conf.intr_conf.rmv = 1;
+
+ if (rx_err_pkt_drop_all)
+ port->dev_conf.err_pkt_drop_conf.all = 1;
}
}
@@ -314,6 +314,7 @@ extern uint8_t no_device_start; /**<set by "--disable-device-start" parameter */
extern volatile int test_done; /* stop packet forwarding when set to 1. */
extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter */
extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */
+extern uint8_t rx_err_pkt_drop_all; /**< enabled by "--enable-hw-drop-err-all" parameter */
extern uint32_t event_print_mask;
/**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
extern bool setup_on_probe_event; /**< disabled by port setup-on iterator */
@@ -213,6 +213,10 @@ The command line options are:
Enable hardware QINQ strip.
+* ``--enable-hw-drop-err-all``
+
+ Enable hardware packet drop for any error packets
+
* ``--enable-drop-en``
Enable per-queue packet drop for packets with no descriptors.