@@ -6,7 +6,7 @@
#define _RTE_ATOMIC_ARM32_H_
#ifndef RTE_FORCE_INTRINSICS
-# error Platform must be built with CONFIG_RTE_FORCE_INTRINSICS
+# error Platform must be built with RTE_FORCE_INTRINSICS
#endif
#ifdef __cplusplus
@@ -7,7 +7,7 @@
#define _RTE_ATOMIC_ARM64_H_
#ifndef RTE_FORCE_INTRINSICS
-# error Platform must be built with CONFIG_RTE_FORCE_INTRINSICS
+# error Platform must be built with RTE_FORCE_INTRINSICS
#endif
#ifdef __cplusplus
@@ -6,7 +6,7 @@
#define _RTE_BYTEORDER_ARM_H_
#ifndef RTE_FORCE_INTRINSICS
-# error Platform must be built with CONFIG_RTE_FORCE_INTRINSICS
+# error Platform must be built with RTE_FORCE_INTRINSICS
#endif
#ifdef __cplusplus
@@ -6,7 +6,7 @@
#define _RTE_MCSLOCK_ARM_H_
#ifndef RTE_FORCE_INTRINSICS
-# error Platform must be built with CONFIG_RTE_FORCE_INTRINSICS
+# error Platform must be built with RTE_FORCE_INTRINSICS
#endif
#ifdef __cplusplus
@@ -6,7 +6,7 @@
#define _RTE_SPINLOCK_ARM_H_
#ifndef RTE_FORCE_INTRINSICS
-# error Platform must be built with CONFIG_RTE_FORCE_INTRINSICS
+# error Platform must be built with RTE_FORCE_INTRINSICS
#endif
#ifdef __cplusplus
@@ -6,7 +6,7 @@
#define _RTE_TICKETLOCK_ARM_H_
#ifndef RTE_FORCE_INTRINSICS
-# error Platform must be built with CONFIG_RTE_FORCE_INTRINSICS
+# error Platform must be built with RTE_FORCE_INTRINSICS
#endif
#ifdef __cplusplus
@@ -120,7 +120,7 @@ eal_dynmem_memseg_lists_init(void)
if (max_seglists_per_type == 0) {
RTE_LOG(ERR, EAL, "Cannot accommodate all memory types, please increase %s\n",
- RTE_STR(CONFIG_RTE_MAX_MEMSEG_LISTS));
+ RTE_STR(RTE_MAX_MEMSEG_LISTS));
goto out;
}
@@ -180,7 +180,7 @@ eal_dynmem_memseg_lists_init(void)
if (msl_idx >= RTE_MAX_MEMSEG_LISTS) {
RTE_LOG(ERR, EAL,
"No more space in memseg lists, please increase %s\n",
- RTE_STR(CONFIG_RTE_MAX_MEMSEG_LISTS));
+ RTE_STR(RTE_MAX_MEMSEG_LISTS));
goto out;
}
msl = &mcfg->memsegs[msl_idx++];
@@ -173,8 +173,8 @@ rte_eal_hugepage_init(void)
}
if (msl_idx == RTE_MAX_MEMSEG_LISTS) {
RTE_LOG(ERR, EAL, "Could not find space for memseg. Please increase %s and/or %s in configuration.\n",
- RTE_STR(CONFIG_RTE_MAX_MEMSEG_PER_TYPE),
- RTE_STR(CONFIG_RTE_MAX_MEM_MB_PER_TYPE));
+ RTE_STR(RTE_MAX_MEMSEG_PER_TYPE),
+ RTE_STR(RTE_MAX_MEM_MB_PER_TYPE));
return -1;
}
arr = &msl->memseg_arr;
@@ -405,7 +405,7 @@ memseg_primary_init(void)
if (msl_idx >= RTE_MAX_MEMSEG_LISTS) {
RTE_LOG(ERR, EAL,
"No more space in memseg lists, please increase %s\n",
- RTE_STR(CONFIG_RTE_MAX_MEMSEG_LISTS));
+ RTE_STR(RTE_MAX_MEMSEG_LISTS));
return -1;
}
@@ -713,8 +713,8 @@ remap_segment(struct hugepage_file *hugepages, int seg_start, int seg_end)
}
if (msl_idx == RTE_MAX_MEMSEG_LISTS) {
RTE_LOG(ERR, EAL, "Could not find space for memseg. Please increase %s and/or %s in configuration.\n",
- RTE_STR(CONFIG_RTE_MAX_MEMSEG_PER_TYPE),
- RTE_STR(CONFIG_RTE_MAX_MEM_MB_PER_TYPE));
+ RTE_STR(RTE_MAX_MEMSEG_PER_TYPE),
+ RTE_STR(RTE_MAX_MEM_MB_PER_TYPE));
return -1;
}
@@ -963,7 +963,7 @@ prealloc_segments(struct hugepage_file *hugepages, int n_pages)
}
if (msl_idx == RTE_MAX_MEMSEG_LISTS) {
RTE_LOG(ERR, EAL, "Not enough space in memseg lists, please increase %s\n",
- RTE_STR(CONFIG_RTE_MAX_MEMSEG_LISTS));
+ RTE_STR(RTE_MAX_MEMSEG_LISTS));
return -1;
}
@@ -1818,7 +1818,7 @@ memseg_primary_init_32(void)
if (msl_idx >= RTE_MAX_MEMSEG_LISTS) {
RTE_LOG(ERR, EAL,
"No more space in memseg lists, please increase %s\n",
- RTE_STR(CONFIG_RTE_MAX_MEMSEG_LISTS));
+ RTE_STR(RTE_MAX_MEMSEG_LISTS));
return -1;
}
@@ -163,7 +163,7 @@ rte_eal_hpet_init(int make_default)
RTE_LOG(ERR, EAL, "ERROR: Cannot mmap "DEV_HPET"!\n"
"Please enable CONFIG_HPET_MMAP in your kernel configuration "
"to allow HPET support.\n"
- "To run without using HPET, set CONFIG_RTE_LIBEAL_USE_HPET=n "
+ "To run without using HPET, unset RTE_LIBEAL_USE_HPET "
"in your build configuration or use '--no-hpet' EAL flag.\n");
close(fd);
internal_conf->no_hpet = 1;
@@ -17,7 +17,7 @@
* @file
* VFIO socket for communication between primary and secondary processes.
*
- * This file is only compiled if CONFIG_RTE_EAL_VFIO is set to "y".
+ * This file is only compiled if RTE_EAL_VFIO is set.
*/
#ifdef VFIO_PRESENT
@@ -495,8 +495,7 @@ struct rte_mbuf {
* It should only be accessed using the following functions:
* rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
* rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
- * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
- * config option.
+ * or non-atomic) is controlled by the RTE_MBUF_REFCNT_ATOMIC flag.
*/
uint16_t refcnt;
uint16_t nb_segs; /**< Number of segments. */
@@ -84,7 +84,7 @@ struct rte_rcu_qsbr_cnt {
* changes to various APIs.
*/
uint32_t lock_cnt;
- /**< Lock counter. Used when CONFIG_RTE_LIBRTE_RCU_DEBUG is enabled */
+ /**< Lock counter. Used when RTE_LIBRTE_RCU_DEBUG is enabled */
} __rte_cache_aligned;
#define __RTE_QSBR_CNT_THR_OFFLINE 0
@@ -383,11 +383,11 @@ rte_rcu_qsbr_thread_offline(struct rte_rcu_qsbr *v, unsigned int thread_id)
* This API is provided to aid debugging. This should be called before
* accessing a shared data structure.
*
- * When CONFIG_RTE_LIBRTE_RCU_DEBUG is enabled a lock counter is incremented.
+ * When RTE_LIBRTE_RCU_DEBUG is enabled a lock counter is incremented.
* Similarly rte_rcu_qsbr_unlock will decrement the counter. When the
* rte_rcu_qsbr_check API will verify that this counter is 0.
*
- * When CONFIG_RTE_LIBRTE_RCU_DEBUG is disabled, this API will do nothing.
+ * When RTE_LIBRTE_RCU_DEBUG is disabled, this API will do nothing.
*
* @param v
* QS variable
@@ -416,11 +416,11 @@ rte_rcu_qsbr_lock(__rte_unused struct rte_rcu_qsbr *v,
* This API is provided to aid debugging. This should be called after
* accessing a shared data structure.
*
- * When CONFIG_RTE_LIBRTE_RCU_DEBUG is enabled, rte_rcu_qsbr_unlock will
+ * When RTE_LIBRTE_RCU_DEBUG is enabled, rte_rcu_qsbr_unlock will
* decrement a lock counter. rte_rcu_qsbr_check API will verify that this
* counter is 0.
*
- * When CONFIG_RTE_LIBRTE_RCU_DEBUG is disabled, this API will do nothing.
+ * When RTE_LIBRTE_RCU_DEBUG is disabled, this API will do nothing.
*
* @param v
* QS variable