[01/14] net/ice/base: add firmware log support
Checks
Commit Message
Currently we do not provide full end-to-end solution for system level
debug and diagnostics. This change purpose is to fulfill design and
implementation gaps to provide full end-to-end (HW-FW-SW) diagnostic
solution. In addition to functional improvements, it will provide
feasible, user-friendly Debug information.
Signed-off-by: Amir Shay <shay.amir@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 54 ++++++++++++++++++++++++++-
1 file changed, 53 insertions(+), 1 deletion(-)
@@ -2730,6 +2730,50 @@ struct ice_aqc_clear_health_status {
__le32 reserved[4];
};
+/* Set FW Logging configuration (indirect 0xFF30)
+ * Register for FW Logging (indirect 0xFF31)
+ * Query FW Logging (indirect 0xFF32)
+ * FW Log Event (indirect 0xFF33)
+ * Get FW Log (indirect 0xFF34)
+ * Clear FW Log (indirect 0xFF35)
+ */
+
+struct ice_aqc_fw_log {
+ u8 cmd_flags;
+#define ICE_AQC_FW_LOG_CONF_UART_EN BIT(0)
+#define ICE_AQC_FW_LOG_CONF_AQ_EN BIT(1)
+#define ICE_AQC_FW_LOG_CONF_SET_VALID BIT(3)
+#define ICE_AQC_FW_LOG_AQ_REGISTER BIT(0)
+#define ICE_AQC_FW_LOG_AQ_QUERY BIT(2)
+#define ICE_AQC_FW_LOG_PERSISTENT BIT(0)
+ u8 rsp_flag;
+#define ICE_AQC_FW_LOG_MORE_DATA BIT(1)
+ __le16 fw_rt_msb;
+ union {
+ struct {
+ __le32 fw_rt_lsb;
+ } sync;
+ struct {
+ __le16 log_resolution;
+#define ICE_AQC_FW_LOG_MIN_RESOLUTION (1)
+#define ICE_AQC_FW_LOG_MAX_RESOLUTION (128)
+ __le16 mdl_cnt;
+ } cfg;
+ } ops;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* Response Buffer for:
+ * Set Firmware Logging Configuration (0xFF30)
+ * Query FW Logging (0xFF32)
+ */
+struct ice_aqc_fw_log_cfg_resp {
+ __le16 module_identifier;
+ u8 log_level;
+ u8 rsvd0;
+};
+
/**
* struct ice_aq_desc - Admin Queue (AQ) descriptor
* @flags: ICE_AQ_FLAG_* flags
@@ -3090,7 +3134,15 @@ enum ice_adminq_opc {
ice_aqc_opc_set_health_status_config = 0xFF20,
ice_aqc_opc_get_supported_health_status_codes = 0xFF21,
ice_aqc_opc_get_health_status = 0xFF22,
- ice_aqc_opc_clear_health_status = 0xFF23
+ ice_aqc_opc_clear_health_status = 0xFF23,
+
+ /* FW Logging Commands */
+ ice_aqc_opc_fw_logs_config = 0xFF30,
+ ice_aqc_opc_fw_logs_register = 0xFF31,
+ ice_aqc_opc_fw_logs_query = 0xFF32,
+ ice_aqc_opc_fw_logs_event = 0xFF33,
+ ice_aqc_opc_fw_logs_get = 0xFF34,
+ ice_aqc_opc_fw_logs_clear = 0xFF35
};
#endif /* _ICE_ADMINQ_CMD_H_ */