[v4,1/4] ethdev: add packet mode in meter profile structure
Checks
Commit Message
Currently meter algorithms only supports rate is bytes per second(BPS).
Add packet_mode flag in meter profile parameters data structure.
So that it can meter traffic by packet per second.
When packet_mode is 0, the profile rates and bucket sizes are
specified in bytes per second and bytes
when packet_mode is not 0, the profile rates and bucket sizes are
specified in packets and packets per second.
The below structure will be extended:
rte_mtr_meter_profile
rte_mtr_capabilities
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
---
doc/guides/rel_notes/release_21_05.rst | 12 ++++
lib/librte_ethdev/rte_mtr.h | 90 ++++++++++++++++++++++----
2 files changed, 91 insertions(+), 11 deletions(-)
@@ -183,6 +183,18 @@ New Features
* ethdev: Added RTE_FLOW_ACTION_TYPE_METER_COLOR in enum rte_flow_action_type.
* ethdev: Added RTE_MTR_ERROR_TYPE_METER_POLICY_ID and RTE_MTR_ERROR_TYPE_METER_POLICY_ID into rte_mtr_error_type.
+* **Added support for meter PPS profile.**
+
+ Currently meter algorithms only supports bytes per second(BPS).
+ Add packet_mode in the meter profile parameters data structures
+ to support packet per second (PPS) mode.
+ So that it can meter traffic by packet per second.
+ Packet_mode must be 0 when it is bytes mode.
+
+* **Updated MLX5 driver.**
+
+ * Added support for meter profile packet per second mode (packet_mode).
+
Removed Items
-------------
@@ -133,46 +133,71 @@ struct rte_mtr_meter_profile {
union {
/** Items only valid when *alg* is set to srTCM - RFC 2697. */
struct {
- /** Committed Information Rate (CIR) (bytes/second). */
+ /**
+ * Committed Information Rate (CIR)
+ * (bytes per second or packets per second).
+ */
uint64_t cir;
- /** Committed Burst Size (CBS) (bytes). */
+ /** Committed Burst Size (CBS) (bytes or packets). */
uint64_t cbs;
- /** Excess Burst Size (EBS) (bytes). */
+ /** Excess Burst Size (EBS) (bytes or packets). */
uint64_t ebs;
} srtcm_rfc2697;
/** Items only valid when *alg* is set to trTCM - RFC 2698. */
struct {
- /** Committed Information Rate (CIR) (bytes/second). */
+ /**
+ * Committed Information Rate (CIR)
+ * (bytes per second or packets per second).
+ */
uint64_t cir;
- /** Peak Information Rate (PIR) (bytes/second). */
+ /**
+ * Peak Information Rate (PIR)
+ * (bytes per second or packets per second).
+ */
uint64_t pir;
- /** Committed Burst Size (CBS) (byes). */
+ /** Committed Burst Size (CBS) (bytes or packets). */
uint64_t cbs;
- /** Peak Burst Size (PBS) (bytes). */
+ /** Peak Burst Size (PBS) (bytes or packets). */
uint64_t pbs;
} trtcm_rfc2698;
/** Items only valid when *alg* is set to trTCM - RFC 4115. */
struct {
- /** Committed Information Rate (CIR) (bytes/second). */
+ /**
+ * Committed Information Rate (CIR)
+ * (bytes per second or packets per second).
+ */
uint64_t cir;
- /** Excess Information Rate (EIR) (bytes/second). */
+ /**
+ * Excess Information Rate (EIR)
+ * (bytes per second or packets per second).
+ */
uint64_t eir;
- /** Committed Burst Size (CBS) (byes). */
+ /** Committed Burst Size (CBS) (bytes or packets). */
uint64_t cbs;
- /** Excess Burst Size (EBS) (bytes). */
+ /** Excess Burst Size (EBS) (bytes or packets). */
uint64_t ebs;
} trtcm_rfc4115;
};
+
+ /**
+ * When zero, the byte mode is enabled for the current profile, so the
+ * *rate* and *size* fields are specified in bytes per second
+ * and bytes, respectively.
+ * When non-zero, the packet mode is enabled for the current profile,
+ * so the *rate* and *size* fields are specified in packets per second
+ * and packets, respectively.
+ */
+ int packet_mode;
};
/**
@@ -346,6 +371,48 @@ struct rte_mtr_capabilities {
*/
int color_aware_trtcm_rfc4115_supported;
+ /**
+ * srTCM rfc2697 byte mode supported.
+ * When non-zero, it indicates that byte mode is supported for
+ * the srTCM RFC 2697 metering algorithm.
+ */
+ int srtcm_rfc2697_byte_mode_supported;
+
+ /**
+ * srTCM rfc2697 packet mode supported.
+ * When non-zero, it indicates that packet mode is supported for
+ * the srTCM RFC 2697 metering algorithm.
+ */
+ int srtcm_rfc2697_packet_mode_supported;
+
+ /**
+ * trTCM rfc2698 byte mode supported.
+ * When non-zero, it indicates that byte mode is supported for
+ * the trTCM RFC 2698 metering algorithm.
+ */
+ int trtcm_rfc2698_byte_mode_supported;
+
+ /**
+ * trTCM rfc2698 packet mode supported.
+ * When non-zero, it indicates that packet mode is supported for
+ * the trTCM RFC 2698 metering algorithm.
+ */
+ int trtcm_rfc2698_packet_mode_supported;
+
+ /**
+ * trTCM rfc4115 byte mode supported.
+ * When non-zero, it indicates that byte mode is supported for
+ * the trTCM RFC 4115 metering algorithm.
+ */
+ int trtcm_rfc4115_byte_mode_supported;
+
+ /**
+ * trTCM rfc4115 packet mode supported.
+ * When non-zero, it indicates that packet mode is supported for
+ * the trTCM RFC 4115 metering algorithm.
+ */
+ int trtcm_rfc4115_packet_mode_supported;
+
/** Set of supported statistics counter types.
* @see enum rte_mtr_stats_type
*/
@@ -363,6 +430,7 @@ enum rte_mtr_error_type {
RTE_MTR_ERROR_TYPE_UNSPECIFIED, /**< Cause unspecified. */
RTE_MTR_ERROR_TYPE_METER_PROFILE_ID,
RTE_MTR_ERROR_TYPE_METER_PROFILE,
+ RTE_MTR_ERROR_TYPE_METER_PROFILE_PACKET_MODE,
RTE_MTR_ERROR_TYPE_MTR_ID,
RTE_MTR_ERROR_TYPE_MTR_PARAMS,
RTE_MTR_ERROR_TYPE_POLICER_ACTION_GREEN,