[v3] net/mlx5: fix loopback for DV queue
Checks
Commit Message
In the past, all the queues and other hardware objects were created
through Verbs interface. Currently, most of the objects creation are
migrated to Devx interface by default, including queues. Only when
the DV is disabled by device arg or eswitch is enabled, all or some
of the objects are created through Verbs interface.
When using Devx interface to create queues, the kernel driver
behavior is different from the case using Verbs. The Tx loopback
cannot work properly even if the Tx and Rx queues are configured
with loopback attribute. To fix the support self loopback for Tx, a
Verbs dummy queue pair needs to be created to trigger the kernel to
enable the global loopback capability.
This is only required when TIR is created for Rx and loopback is
needed. Only CQ and QP are needed for this case, no WQ(RQ) needs to
be created.
This requirement comes from bugzilla 645, more details can be found
in the bugzilla link.
Bugzilla ID: 645
Fixes: 6deb19e1b2d2 ("net/mlx5: separate Rx queue object creations")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
drivers/net/mlx5/linux/mlx5_os.c | 5 +-
drivers/net/mlx5/linux/mlx5_verbs.c | 121 ++++++++++++++++++++++++++++
drivers/net/mlx5/linux/mlx5_verbs.h | 2 +
drivers/net/mlx5/mlx5.h | 11 +++
drivers/net/mlx5/mlx5_devx.c | 2 +
drivers/net/mlx5/mlx5_trigger.c | 10 +++
6 files changed, 150 insertions(+), 1 deletion(-)
Comments
17/05/2021 17:18, Bing Zhao:
> In the past, all the queues and other hardware objects were created
> through Verbs interface. Currently, most of the objects creation are
> migrated to Devx interface by default, including queues. Only when
> the DV is disabled by device arg or eswitch is enabled, all or some
> of the objects are created through Verbs interface.
>
> When using Devx interface to create queues, the kernel driver
> behavior is different from the case using Verbs. The Tx loopback
> cannot work properly even if the Tx and Rx queues are configured
> with loopback attribute. To fix the support self loopback for Tx, a
> Verbs dummy queue pair needs to be created to trigger the kernel to
> enable the global loopback capability.
>
> This is only required when TIR is created for Rx and loopback is
> needed. Only CQ and QP are needed for this case, no WQ(RQ) needs to
> be created.
>
> This requirement comes from bugzilla 645, more details can be found
> in the bugzilla link.
>
> Bugzilla ID: 645
>
> Fixes: 6deb19e1b2d2 ("net/mlx5: separate Rx queue object creations")
> Cc: stable@dpdk.org
>
> Signed-off-by: Bing Zhao <bingz@nvidia.com>
> Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Applied to next-net-mlx, thanks.
Thanks a lot, Thomas.
> -----Original Message-----
> From: Thomas Monjalon <thomas@monjalon.net>
> Sent: Tuesday, May 18, 2021 4:33 PM
> To: Bing Zhao <bingz@nvidia.com>
> Cc: Slava Ovsiienko <viacheslavo@nvidia.com>; Matan Azrad
> <matan@nvidia.com>; dev@dpdk.org; Ori Kam <orika@nvidia.com>; Raslan
> Darawsheh <rasland@nvidia.com>; stable@dpdk.org; Tal Shnaiderman
> <talshn@nvidia.com>
> Subject: Re: [dpdk-dev] [PATCH v3] net/mlx5: fix loopback for DV
> queue
>
> External email: Use caution opening links or attachments
>
>
> 17/05/2021 17:18, Bing Zhao:
> > In the past, all the queues and other hardware objects were
> created
> > through Verbs interface. Currently, most of the objects creation
> are
> > migrated to Devx interface by default, including queues. Only when
> the
> > DV is disabled by device arg or eswitch is enabled, all or some of
> the
> > objects are created through Verbs interface.
> >
> > When using Devx interface to create queues, the kernel driver
> behavior
> > is different from the case using Verbs. The Tx loopback cannot
> work
> > properly even if the Tx and Rx queues are configured with loopback
> > attribute. To fix the support self loopback for Tx, a Verbs dummy
> > queue pair needs to be created to trigger the kernel to enable the
> > global loopback capability.
> >
> > This is only required when TIR is created for Rx and loopback is
> > needed. Only CQ and QP are needed for this case, no WQ(RQ) needs
> to be
> > created.
> >
> > This requirement comes from bugzilla 645, more details can be
> found in
> > the bugzilla link.
> >
> > Bugzilla ID: 645
> >
> > Fixes: 6deb19e1b2d2 ("net/mlx5: separate Rx queue object
> creations")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Bing Zhao <bingz@nvidia.com>
> > Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
>
> Applied to next-net-mlx, thanks.
>
>
@@ -1632,7 +1632,10 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
priv->obj_ops.txq_obj_new = mlx5_os_txq_obj_new;
priv->obj_ops.txq_obj_release = mlx5_os_txq_obj_release;
mlx5_queue_counter_id_prepare(eth_dev);
-
+ priv->obj_ops.lb_dummy_queue_create =
+ mlx5_rxq_ibv_obj_dummy_lb_create;
+ priv->obj_ops.lb_dummy_queue_release =
+ mlx5_rxq_ibv_obj_dummy_lb_release;
} else {
priv->obj_ops = ibv_obj_ops;
}
@@ -1055,6 +1055,125 @@ mlx5_txq_ibv_obj_new(struct rte_eth_dev *dev, uint16_t idx)
return -rte_errno;
}
+/*
+ * Create the dummy QP with minimal resources for loopback.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_rxq_ibv_obj_dummy_lb_create(struct rte_eth_dev *dev)
+{
+#if defined(HAVE_IBV_DEVICE_TUNNEL_SUPPORT) && defined(HAVE_IBV_FLOW_DV_SUPPORT)
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_ctx_shared *sh = priv->sh;
+ struct ibv_context *ctx = sh->ctx;
+ struct mlx5dv_qp_init_attr qp_init_attr = {0};
+ struct {
+ struct ibv_cq_init_attr_ex ibv;
+ struct mlx5dv_cq_init_attr mlx5;
+ } cq_attr = {{0}};
+
+ if (dev->data->dev_conf.lpbk_mode) {
+ /* Allow packet sent from NIC loop back w/o source MAC check. */
+ qp_init_attr.comp_mask |=
+ MLX5DV_QP_INIT_ATTR_MASK_QP_CREATE_FLAGS;
+ qp_init_attr.create_flags |=
+ MLX5DV_QP_CREATE_TIR_ALLOW_SELF_LOOPBACK_UC;
+ } else {
+ return 0;
+ }
+ /* Only need to check refcnt, 0 after "sh" is allocated. */
+ if (!!(__atomic_fetch_add(&sh->self_lb.refcnt, 1, __ATOMIC_RELAXED))) {
+ MLX5_ASSERT(sh->self_lb.ibv_cq && sh->self_lb.qp);
+ priv->lb_used = 1;
+ return 0;
+ }
+ cq_attr.ibv = (struct ibv_cq_init_attr_ex){
+ .cqe = 1,
+ .channel = NULL,
+ .comp_mask = 0,
+ };
+ cq_attr.mlx5 = (struct mlx5dv_cq_init_attr){
+ .comp_mask = 0,
+ };
+ /* Only CQ is needed, no WQ(RQ) is required in this case. */
+ sh->self_lb.ibv_cq = mlx5_glue->cq_ex_to_cq(mlx5_glue->dv_create_cq(ctx,
+ &cq_attr.ibv,
+ &cq_attr.mlx5));
+ if (!sh->self_lb.ibv_cq) {
+ DRV_LOG(ERR, "Port %u cannot allocate CQ for loopback.",
+ dev->data->port_id);
+ rte_errno = errno;
+ goto error;
+ }
+ sh->self_lb.qp = mlx5_glue->dv_create_qp(ctx,
+ &(struct ibv_qp_init_attr_ex){
+ .qp_type = IBV_QPT_RAW_PACKET,
+ .comp_mask = IBV_QP_INIT_ATTR_PD,
+ .pd = sh->pd,
+ .send_cq = sh->self_lb.ibv_cq,
+ .recv_cq = sh->self_lb.ibv_cq,
+ .cap.max_recv_wr = 1,
+ },
+ &qp_init_attr);
+ if (!sh->self_lb.qp) {
+ DRV_LOG(DEBUG, "Port %u cannot allocate QP for loopback.",
+ dev->data->port_id);
+ rte_errno = errno;
+ goto error;
+ }
+ priv->lb_used = 1;
+ return 0;
+error:
+ if (sh->self_lb.ibv_cq) {
+ claim_zero(mlx5_glue->destroy_cq(sh->self_lb.ibv_cq));
+ sh->self_lb.ibv_cq = NULL;
+ }
+ (void)__atomic_sub_fetch(&sh->self_lb.refcnt, 1, __ATOMIC_RELAXED);
+ return -rte_errno;
+#else
+ RTE_SET_USED(dev);
+ return 0;
+#endif
+}
+
+/*
+ * Release the dummy queue resources for loopback.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ */
+void
+mlx5_rxq_ibv_obj_dummy_lb_release(struct rte_eth_dev *dev)
+{
+#if defined(HAVE_IBV_DEVICE_TUNNEL_SUPPORT) && defined(HAVE_IBV_FLOW_DV_SUPPORT)
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_dev_ctx_shared *sh = priv->sh;
+
+ if (!priv->lb_used)
+ return;
+ MLX5_ASSERT(__atomic_load_n(&sh->self_lb.refcnt, __ATOMIC_RELAXED));
+ if (!(__atomic_sub_fetch(&sh->self_lb.refcnt, 1, __ATOMIC_RELAXED))) {
+ if (sh->self_lb.qp) {
+ claim_zero(mlx5_glue->destroy_qp(sh->self_lb.qp));
+ sh->self_lb.qp = NULL;
+ }
+ if (sh->self_lb.ibv_cq) {
+ claim_zero(mlx5_glue->destroy_cq(sh->self_lb.ibv_cq));
+ sh->self_lb.ibv_cq = NULL;
+ }
+ }
+ priv->lb_used = 0;
+#else
+ RTE_SET_USED(dev);
+ return;
+#endif
+}
+
/**
* Release an Tx verbs queue object.
*
@@ -1084,4 +1203,6 @@ struct mlx5_obj_ops ibv_obj_ops = {
.txq_obj_new = mlx5_txq_ibv_obj_new,
.txq_obj_modify = mlx5_ibv_modify_qp,
.txq_obj_release = mlx5_txq_ibv_obj_release,
+ .lb_dummy_queue_create = NULL,
+ .lb_dummy_queue_release = NULL,
};
@@ -9,6 +9,8 @@
int mlx5_txq_ibv_obj_new(struct rte_eth_dev *dev, uint16_t idx);
void mlx5_txq_ibv_obj_release(struct mlx5_txq_obj *txq_obj);
+int mlx5_rxq_ibv_obj_dummy_lb_create(struct rte_eth_dev *dev);
+void mlx5_rxq_ibv_obj_dummy_lb_release(struct rte_eth_dev *dev);
/* Verbs ops struct */
extern const struct mlx5_mr_ops mlx5_mr_verbs_ops;
@@ -287,6 +287,13 @@ struct mlx5_drop {
struct mlx5_rxq_obj *rxq; /* Rx queue object. */
};
+/* Loopback dummy queue resources required due to Verbs API. */
+struct mlx5_lb_ctx {
+ struct ibv_qp *qp; /* QP object. */
+ void *ibv_cq; /* Completion queue. */
+ uint16_t refcnt; /* Reference count for representors. */
+};
+
#define MLX5_COUNTERS_PER_POOL 512
#define MLX5_MAX_PENDING_QUERIES 4
#define MLX5_CNT_CONTAINER_RESIZE 64
@@ -1128,6 +1135,7 @@ struct mlx5_dev_ctx_shared {
/* Meter management structure. */
struct mlx5_aso_ct_pools_mng *ct_mng;
/* Management data for ASO connection tracking. */
+ struct mlx5_lb_ctx self_lb; /* QP to enable self loopback for Devx. */
struct mlx5_dev_shared_port port[]; /* per device port data array. */
};
@@ -1287,6 +1295,8 @@ struct mlx5_obj_ops {
int (*txq_obj_modify)(struct mlx5_txq_obj *obj,
enum mlx5_txq_modify_type type, uint8_t dev_port);
void (*txq_obj_release)(struct mlx5_txq_obj *txq_obj);
+ int (*lb_dummy_queue_create)(struct rte_eth_dev *dev);
+ void (*lb_dummy_queue_release)(struct rte_eth_dev *dev);
};
#define MLX5_RSS_HASH_FIELDS_LEN RTE_DIM(mlx5_rss_hash_fields)
@@ -1316,6 +1326,7 @@ struct mlx5_priv {
unsigned int sampler_en:1; /* Whether support sampler. */
unsigned int mtr_en:1; /* Whether support meter. */
unsigned int mtr_reg_share:1; /* Whether support meter REG_C share. */
+ unsigned int lb_used:1; /* Loopback queue is referred to. */
uint16_t domain_id; /* Switch domain identifier. */
uint16_t vport_id; /* Associated VF vport index (if any). */
uint32_t vport_meta_tag; /* Used for vport index match ove VF LAG. */
@@ -1188,4 +1188,6 @@ struct mlx5_obj_ops devx_obj_ops = {
.txq_obj_new = mlx5_txq_devx_obj_new,
.txq_obj_modify = mlx5_devx_modify_sq,
.txq_obj_release = mlx5_txq_devx_obj_release,
+ .lb_dummy_queue_create = NULL,
+ .lb_dummy_queue_release = NULL,
};
@@ -1068,6 +1068,12 @@ mlx5_dev_start(struct rte_eth_dev *dev)
dev->data->port_id, strerror(rte_errno));
goto error;
}
+ if ((priv->config.devx && priv->config.dv_flow_en &&
+ priv->config.dest_tir) && priv->obj_ops.lb_dummy_queue_create) {
+ ret = priv->obj_ops.lb_dummy_queue_create(dev);
+ if (ret)
+ goto error;
+ }
ret = mlx5_txq_start(dev);
if (ret) {
DRV_LOG(ERR, "port %u Tx queue allocation failed: %s",
@@ -1148,6 +1154,8 @@ mlx5_dev_start(struct rte_eth_dev *dev)
mlx5_traffic_disable(dev);
mlx5_txq_stop(dev);
mlx5_rxq_stop(dev);
+ if (priv->obj_ops.lb_dummy_queue_release)
+ priv->obj_ops.lb_dummy_queue_release(dev);
mlx5_txpp_stop(dev); /* Stop last. */
rte_errno = ret; /* Restore rte_errno. */
return -rte_errno;
@@ -1186,6 +1194,8 @@ mlx5_dev_stop(struct rte_eth_dev *dev)
priv->sh->port[priv->dev_port - 1].devx_ih_port_id = RTE_MAX_ETHPORTS;
mlx5_txq_stop(dev);
mlx5_rxq_stop(dev);
+ if (priv->obj_ops.lb_dummy_queue_release)
+ priv->obj_ops.lb_dummy_queue_release(dev);
mlx5_txpp_stop(dev);
return 0;