EAL: Detected CPU lcores: 8
EAL: Detected NUMA nodes: 1
EAL: RTE Version: 'DPDK 23.11.0-rc4'
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_69308_538d6a0d2cd
EAL: Selected IOVA mode 'VA'
EAL: VFIO support initialized
EAL: Probe PCI driver: mlx5_pci (15b3:1017) device: 0000:02:00.0 (socket -1)
EAL: Probe PCI driver: mlx5_pci (15b3:1017) device: 0000:02:00.1 (socket -1)
rte_pdump_init(): cannot allocate pdump statistics
Warning: NUMA should be configured manually by using --port-numa-config and --ring-numa-config parameters along with --numa.
Configuring Port 0 (socket 0)
Port 0: B8:3F:D2:9F:23:72
Configuring Port 1 (socket 0)
Port 1: B8:3F:D2:9F:23:73
Checking link statuses...
Done
No commandline core given, start packet forwarding
io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 1 (socket 0) forwards packets on 2 streams:
  RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
  RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00

  io packet forwarding packets/burst=32
  nb forwarding cores=1 - nb forwarding ports=2
  port 0: RX queue number: 1 Tx queue number: 1
    Rx offloads=0x0 Tx offloads=0x10000
    RX queue: 0
      RX desc=256 - RX free threshold=64
      RX threshold registers: pthresh=0 hthresh=0  wthresh=0
      RX Offloads=0x0
    TX queue: 0
      TX desc=256 - TX free threshold=0
      TX threshold registers: pthresh=0 hthresh=0  wthresh=0
      TX offloads=0x10000 - TX RS bit threshold=0
  port 1: RX queue number: 1 Tx queue number: 1
    Rx offloads=0x0 Tx offloads=0x10000
    RX queue: 0
      RX desc=256 - RX free threshold=64
      RX threshold registers: pthresh=0 hthresh=0  wthresh=0
      RX Offloads=0x0
    TX queue: 0
      TX desc=256 - TX free threshold=0
      TX threshold registers: pthresh=0 hthresh=0  wthresh=0
      TX offloads=0x10000 - TX RS bit threshold=0
Process 69308 stopped
* thread #1, name = 'dpdk-testpmd', stop reason = signal SIGSEGV: invalid address (fault address: 0xb077f90)
    frame #0: 0x00007ffff7e909e4 libmlx5.so.1`mlx5dv_devx_obj_query + 4
libmlx5.so.1`mlx5dv_devx_obj_query:
->  0x7ffff7e909e4 <+4>:  movq   (%rdi), %rax
    0x7ffff7e909e7 <+7>:  movq   %rdx, %r10
    0x7ffff7e909ea <+10>: leaq   0x1884f(%rip), %r9        ;  + 1344
    0x7ffff7e909f1 <+17>: movq   (%rax), %rdx
(lldb) bt
* thread #1, name = 'dpdk-testpmd', stop reason = signal SIGSEGV: invalid address (fault address: 0xb077f90)
  * frame #0: 0x00007ffff7e909e4 libmlx5.so.1`mlx5dv_devx_obj_query + 4
    frame #1: 0x0000000000cbb039 dpdk-testpmd`mlx5_glue_devx_obj_query(obj=0x000000000b077f90, in=0x00007fffffffd490, inlen=32, out=0x00007fffffffd4b0, 
outlen=1024) at mlx5_glue.c:1074:9
    frame #2: 0x0000000000ca13b8 dpdk-testpmd`mlx5_devx_cmd_queue_counter_query(dcs=0x000000017fd85f40, clear=0, out_of_buffers=0x00007fffffffda00) at mlx5_devx_cmds.c:2999:7
    frame #3: 0x0000000002a8480e dpdk-testpmd`mlx5_os_read_dev_stat(priv=0x000000017ff66240, ctr_name="out_of_buffer", stat=0x00007fffffffda00) at mlx5_os.c:2997:11
    frame #4: 0x0000000001ba77f1 dpdk-testpmd`mlx5_stats_get(dev=0x00000000043d3440, stats=0x000000015c3f7b68) at mlx5_stats.c:155:8
    frame #5: 0x0000000000ab3c14 dpdk-testpmd`rte_eth_stats_get(port_id=0, stats=0x000000015c3f7b68) at rte_ethdev.c:3146:8
    frame #6: 0x0000000000587ec4 dpdk-testpmd`fwd_stats_reset at testpmd.c:2191:9
    frame #7: 0x0000000000588ba1 dpdk-testpmd`start_packet_forwarding(with_tx_first=0) at testpmd.c:2572:2
    frame #8: 0x000000000058d9c6 dpdk-testpmd`main(argc=1, argv=0x00007fffffffe018) at testpmd.c:4722:3
    frame #9: 0x00007ffff743feb0 libc.so.6`__libc_start_call_main + 128
    frame #10: 0x00007ffff743ff60 libc.so.6`__libc_start_main@@GLIBC_2.34 + 128
    frame #11: 0x00000000004e8325 dpdk-testpmd`_start + 37