[dpdk-dev] [PATCH v3 1/7] lib/librte_ether: modify the structures for fdir new modes
Bruce Richardson
bruce.richardson at intel.com
Fri Oct 23 11:58:08 CEST 2015
On Fri, Oct 23, 2015 at 02:22:28AM +0100, Lu, Wenzhuo wrote:
> Hi Bruce,
>
> > -----Original Message-----
> > From: Richardson, Bruce
> > Sent: Thursday, October 22, 2015 8:57 PM
> > To: Lu, Wenzhuo
> > Cc: dev at dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH v3 1/7] lib/librte_ether: modify the structures
> > for fdir new modes
> >
> > On Thu, Oct 22, 2015 at 03:11:36PM +0800, Wenzhuo Lu wrote:
> > > Define the new modes and modify the filter and mask structures for the
> > > mac vlan and tunnel modes.
> > >
> > > Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
> >
> > Hi Wenzhuo,
> >
> > couple of stylistic comments below, which would help with patch review,
> > especially with regards to checking for ABI issues.
> >
> > /Bruce
> >
> > > ---
> > > lib/librte_ether/rte_eth_ctrl.h | 69
> > > ++++++++++++++++++++++++++++++-----------
> > > 1 file changed, 51 insertions(+), 18 deletions(-)
> > >
> > > diff --git a/lib/librte_ether/rte_eth_ctrl.h
> > > b/lib/librte_ether/rte_eth_ctrl.h index 26b7b33..078faf9 100644
> > > --- a/lib/librte_ether/rte_eth_ctrl.h
> > > +++ b/lib/librte_ether/rte_eth_ctrl.h
> > > @@ -248,6 +248,17 @@ enum rte_eth_tunnel_type { };
> > >
> > > /**
> > > + * Flow Director setting modes: none, signature or perfect.
> > > + */
> > > +enum rte_fdir_mode {
> > > + RTE_FDIR_MODE_NONE = 0, /**< Disable FDIR support. */
> > > + RTE_FDIR_MODE_SIGNATURE, /**< Enable FDIR signature filter mode.
> > */
> > > + RTE_FDIR_MODE_PERFECT, /**< Enable FDIR perfect filter mode for
> > IP. */
> > > + RTE_FDIR_MODE_PERFECT_MAC_VLAN, /**< Enable FDIR filter mode
> > - MAC VLAN. */
> > > + RTE_FDIR_MODE_PERFECT_TUNNEL, /**< Enable FDIR filter mode -
> > tunnel. */
> > > +};
> > > +
> >
> > Why is this structure definition moved in the file, it makes seeing the diff vs
> > the old version difficult.
> I remember in the original version I move this enum to resolve a compile issue.
> But now after all the code changed, the issue is not here. So, I'll move it back.
>
> >
> > > +/**
> > > * filter type of tunneling packet
> > > */
> > > #define ETH_TUNNEL_FILTER_OMAC 0x01 /**< filter by outer MAC addr
> > */
> > > @@ -377,18 +388,46 @@ struct rte_eth_sctpv6_flow { };
> > >
> > > /**
> > > + * A structure used to define the input for MAC VLAN flow */ struct
> > > +rte_eth_mac_vlan_flow {
> > > + struct ether_addr mac_addr; /**< Mac address to match. */ };
> > > +
> > > +/**
> > > + * Tunnel type for flow director.
> > > + */
> > > +enum rte_eth_fdir_tunnel_type {
> > > + RTE_FDIR_TUNNEL_TYPE_NVGRE = 0,
> > > + RTE_FDIR_TUNNEL_TYPE_VXLAN,
> > > + RTE_FDIR_TUNNEL_TYPE_UNKNOWN,
> > > +};
> > > +
> > > +/**
> > > + * A structure used to define the input for tunnel flow, now it's
> > > +VxLAN or
> > > + * NVGRE
> > > + */
> > > +struct rte_eth_tunnel_flow {
> > > + enum rte_eth_fdir_tunnel_type tunnel_type; /**< Tunnel type to
> > match. */
> > > + uint32_t tunnel_id; /**< Tunnel ID to match. TNI, VNI...
> > */
> > > + struct ether_addr mac_addr; /**< Mac address to match. */
> > > +};
> > > +
> > > +/**
> > > * An union contains the inputs for all types of flow
> > > */
> > > union rte_eth_fdir_flow {
> > > - struct rte_eth_l2_flow l2_flow;
> > > - struct rte_eth_udpv4_flow udp4_flow;
> > > - struct rte_eth_tcpv4_flow tcp4_flow;
> > > - struct rte_eth_sctpv4_flow sctp4_flow;
> > > - struct rte_eth_ipv4_flow ip4_flow;
> > > - struct rte_eth_udpv6_flow udp6_flow;
> > > - struct rte_eth_tcpv6_flow tcp6_flow;
> > > - struct rte_eth_sctpv6_flow sctp6_flow;
> > > - struct rte_eth_ipv6_flow ipv6_flow;
> > > + struct rte_eth_l2_flow l2_flow;
> > > + struct rte_eth_udpv4_flow udp4_flow;
> > > + struct rte_eth_tcpv4_flow tcp4_flow;
> > > + struct rte_eth_sctpv4_flow sctp4_flow;
> > > + struct rte_eth_ipv4_flow ip4_flow;
> > > + struct rte_eth_udpv6_flow udp6_flow;
> > > + struct rte_eth_tcpv6_flow tcp6_flow;
> > > + struct rte_eth_sctpv6_flow sctp6_flow;
> > > + struct rte_eth_ipv6_flow ipv6_flow;
> > > + struct rte_eth_mac_vlan_flow mac_vlan_flow;
> > > + struct rte_eth_tunnel_flow tunnel_flow;
> >
> > Can you please minimize the whitespace changes here. It looks in the diff
> > like you are replacing the entire set of entries, but on closer inspection it
> > looks like you are just adding in two extra lines.
> Using vi or other editing tools, we can see all this fields are aligned. I think it's
> worth to keep it.
>
I'm a bit uncertain about this. It really makes the diff confusing, so ideally
the whitespace cleanup should go in a separate patch. On the other hand, it's
a fairly small change, so maybe it's ok here.
Right now, I'd prefer it as a separate patch, because I had to manually go
through each line added/removed to see how they tallied before I understood that
you were just adding in two new lines, and nothing else.
Thomas, perhaps you'd like to comment here?
> >
> > > };
> > >
> > > /**
> > > @@ -465,6 +504,9 @@ struct rte_eth_fdir_masks {
> > > struct rte_eth_ipv6_flow ipv6_mask;
> > > uint16_t src_port_mask;
> > > uint16_t dst_port_mask;
> > > + uint8_t mac_addr_byte_mask; /** Per byte MAC address mask */
> > > + uint32_t tunnel_id_mask; /** tunnel ID mask */
> > > + uint8_t tunnel_type_mask;
> > > };
> > >
> > > /**
> > > @@ -515,15 +557,6 @@ struct rte_eth_fdir_flex_conf {
> > > /**< Flex mask configuration for each flow type */ };
> > >
> > > -/**
> > > - * Flow Director setting modes: none, signature or perfect.
> > > - */
> > > -enum rte_fdir_mode {
> > > - RTE_FDIR_MODE_NONE = 0, /**< Disable FDIR support. */
> > > - RTE_FDIR_MODE_SIGNATURE, /**< Enable FDIR signature filter
> > mode. */
> > > - RTE_FDIR_MODE_PERFECT, /**< Enable FDIR perfect filter mode.
> > */
> > > -};
> > > -
> > > #define UINT32_BIT (CHAR_BIT * sizeof(uint32_t)) #define
> > > RTE_FLOW_MASK_ARRAY_SIZE \
> > > (RTE_ALIGN(RTE_ETH_FLOW_MAX, UINT32_BIT)/UINT32_BIT)
> > > --
> > > 1.9.3
> > >
More information about the dev
mailing list