[dpdk-dev] [PATCH v2 1/5] ethdev: introduce Tx generic tunnel offloads

[Ananyev, Konstantin]

> -----Original Message-----
> From: Xueming(Steven) Li [mailto:xuemingl at mellanox.com]
> Sent: Tuesday, January 30, 2018 3:27 PM
> To: Ananyev, Konstantin <konstantin.ananyev at intel.com>; Olivier MATZ <olivier.matz at 6wind.com>
> Cc: dev at dpdk.org; Wu, Jingjing <jingjing.wu at intel.com>; Shahaf Shuler <shahafs at mellanox.com>; Yongseok Koh
> <yskoh at mellanox.com>; Thomas Monjalon <thomas at monjalon.net>; Yigit, Ferruh <ferruh.yigit at intel.com>
> Subject: RE: [dpdk-dev] [PATCH v2 1/5] ethdev: introduce Tx generic tunnel offloads
> 
> Hi Ananyev,
> 
> > -----Original Message-----
> > From: Ananyev, Konstantin [mailto:konstantin.ananyev at intel.com]
> > Sent: Tuesday, January 30, 2018 9:28 PM
> > To: Xueming(Steven) Li <xuemingl at mellanox.com>; Olivier MATZ
> > <olivier.matz at 6wind.com>
> > Cc: dev at dpdk.org; Wu, Jingjing <jingjing.wu at intel.com>; Shahaf Shuler
> > <shahafs at mellanox.com>; Yongseok Koh <yskoh at mellanox.com>; Thomas Monjalon
> > <thomas at monjalon.net>; Yigit, Ferruh <ferruh.yigit at intel.com>
> > Subject: RE: [dpdk-dev] [PATCH v2 1/5] ethdev: introduce Tx generic tunnel
> > offloads
> >
> >
> > Hi Xueming,
> >
> > > > > This patch introduce new TX offloads flag for devices that support
> > > > > tunnel agnostic checksum and TSO offloads.
> > > > >
> > > > > The support from the device is for inner and outer checksums on
> > > > > IPV4/TCP/UDP and TSO for *any packet with the following format*:
> > > > >
> > > > > < some headers > / [optional IPv4/IPv6] / [optional TCP/UDP] /
> > > > > <some
> > > > > headers> / [optional inner IPv4/IPv6] / [optional TCP/UDP]
> > > > >
> > > > > For example the following packets can use this feature:
> > > > >
> > > > > 1. eth / ipv4 / udp / VXLAN / ip / tcp 2. eth / ipv4 / GRE / MPLS
> > > > > /
> > > > > ipv4 / udp
> > > >
> > > > So in terms of usage - what is the difference with current TSO types?
> > > > Konstantin
> > > >
> > >
> > > Traditionally, HW only recognize "known" tunnel type, do TSO
> > > calculation based on L3/L4 headers known to tunnel type. For example,
> > > it must be
> > > L2 header after VXLAN, then L3. While this Generic offloading provides
> > > inner/outer L3/L4 header info(len and offset) to HW, and thus tunnel
> > > info become less important. Please note the MPLS over GRE tunnel in
> > > last example above.
> >
> > Ok, but I wonder when the user would like to do TSO on tunnel packet, for
> > this offload - would he need to do something differently from what he has
> > to do now:
> > raise PKT_TX_TCP_SEG and related flags, raise appropriate PKT_TX_TUNNEL_*
> > flag, fill l2_len, l3_len, l4_len,tso_segsz,outer_l2_len,outer_l3_len?
> >
> 
> Yes, these fields are sufficient except PKT_TX_TUNNEL_*, major target of this
> new feature is to support "unknown" tunnel offloading, it supports "known"
> tunnel type as well.

Ok, but user would still need to set some flag to indicate that this is a tunnel packet,
and he wants TSO over it, right?
For pre-defined tunnel types it can be one of PKT_TX_TUNNEL_*
(which actually means that user still have to know tunnel type anyway?)
But for some not defined tunnel type - what it would be?
Konstantin

> 
> PKT_TX_TUNNEL_VXLAN has to be used as a hint if outer UDP expected.
> 
> > Konstantin
> >
> > >
> > > > >
> > > > > Signed-off-by: Xueming Li <xuemingl at mellanox.com>
> > > > > ---
> > > > >  lib/librte_ether/rte_ethdev.h | 10 ++++++++++
> > > > >  1 file changed, 10 insertions(+)
> > > > >
> > > > > diff --git a/lib/librte_ether/rte_ethdev.h
> > > > > b/lib/librte_ether/rte_ethdev.h index 1a5b4cdc5..d8d08ccb2 100644
> > > > > --- a/lib/librte_ether/rte_ethdev.h
> > > > > +++ b/lib/librte_ether/rte_ethdev.h
> > > > > @@ -979,6 +979,16 @@ struct rte_eth_conf {
> > > > >   *   the same mempool and has refcnt = 1.
> > > > >   */
> > > > >  #define DEV_TX_OFFLOAD_SECURITY         0x00020000
> > > > > +/**< Device supports generic tunnel checksum and TSO offloading.
> > > > > + * Checksum and TSO are done based on following mbuf fields:
> > > > > + *   - Length of each header
> > > > > + *   - Type of outer/inner L3 type, IPv4 or IPv6
> > > > > + *   - Type of outer/inner L4 type, TCP or UDP.
> > > > > + *	- PKT_TX_TUNNEL_VXLAN implies outer UDP type.
> > > > > + *	- PKT_TX_TCP_SEG implies inner TCP type.
> > > > > + * Tunnel type is optional except PKT_TX_TUNNEL_VXLAN to hint outer
> > UDP.
> > > > > + */
> > > > > +#define DEV_TX_OFFLOAD_GENERIC_TNL_CKSUM_TSO	0x00040000
> > > > >
> > > > >  /*
> > > > >   * If new Tx offload capabilities are defined, they also must be
> > > > > --
> > > > > 2.13.3