[dts] [PATCH v2]tests uni_pkt: disable vector ixgbe driver and rename i350 to powerville

[Tu, LijuanX A]

Hi yong,


> -----Original Message-----
> From: Liu, Yong
> Sent: Wednesday, December 02, 2015 9:12 AM
> To: Tu, LijuanX A; dts at dpdk.org
> Subject: Re: [dts] [PATCH v2]tests uni_pkt: disable vector ixgbe driver
> and rename i350 to powerville
> 
> Hi Lijuan,
> One comment about change rx/tx code path.
> 
> On 12/01/2015 03:52 PM, Lijuan Tu wrote:
> > Signed-off-by: Lijuan Tu <lijuanx.a.tu at intel.com>
> > ---
> >   tests/TestSuite_uni_pkt.py | 32 +++++++++++++++++++++++++++-----
> >   1 file changed, 27 insertions(+), 5 deletions(-)
> >
> > diff --git a/tests/TestSuite_uni_pkt.py b/tests/TestSuite_uni_pkt.py
> > index ca72e75..60756c9 100644
> > --- a/tests/TestSuite_uni_pkt.py
> > +++ b/tests/TestSuite_uni_pkt.py
> > @@ -63,6 +63,17 @@ class TestUniPacket(TestCase):
> >           self.dut_port = valports[0]
> >           tester_port = self.tester.get_local_port(self.dut_port)
> >           self.tester_iface = self.tester.get_interface(tester_port)
> > +        """
> > +        Change config file to disable vector pmd and recompile the
> package.
> > +        """
> > +        [arch, machine, env, toolchain] = self.target.split('-')
> > +        if "fortville" in self.nic.lower():
> > +            self.dut.send_expect("sed -i -e
> 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/"
> > +                             +
> "CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_%s" % env, "# ",
> 30)
> > +        elif "niantic" in self.nic.lower():
> > +            self.dut.send_expect("sed -i -e
> 's/CONFIG_RTE_IXGBE_INC_VECTOR=.*$/"
> > +                             + "CONFIG_RTE_IXGBE_INC_VECTOR=n/'
> config/common_%s" % env, "# ", 30)
> > +        self.dut.build_install_dpdk(self.target)
> >           self.dut.send_expect(
> >               "./%s/app/testpmd -c f -n 4 -- -i --txqflags=0x0" %
> self.target, "testpmd>", 20)
> >           self.dut.send_expect("set fwd rxonly", "testpmd>") @@ -
> 117,7
> > +128,7 @@ class TestUniPacket(TestCase):
> >           """
> >           if "fortville" in self.nic.lower():
> >               outerL4Type = "(outer) L4 type: L4_NONFRAG"
> > -        elif "niantic" in self.nic.lower() or "i350" in
> self.nic.lower():
> > +        elif "niantic" in self.nic.lower() or "powerville" in
> self.nic.lower():
> >               outerL4Type = "(outer) L4 type: Unknown"
> >
> >           pktType = {
> > @@ -135,7 +146,7 @@ class TestUniPacket(TestCase):
> >           if "fortville" in self.nic.lower():
> >               pktType.pop("MAC_IPihl_PKT")
> >               pktType.pop("MAC_IPihl_SCTP_PKT")
> > -        elif "niantic" in self.nic.lower() or "i350" in
> self.nic.lower():
> > +        elif "niantic" in self.nic.lower() or "powerville" in
> self.nic.lower():
> >               pktType.pop("MAC_IP_ICMP_PKT")
> >               pktType.pop("MAC_IPFRAG_TCP_PKT")
> >
> > @@ -148,7 +159,7 @@ class TestUniPacket(TestCase):
> >           if "fortville" in self.nic.lower():
> >               outerL4Type = "(outer) L4 type: L4_NONFRAG"
> >               outerL3Type = "(outer) L3 type: IPV6_EXT_UNKNOWN"
> > -        elif "niantic" in self.nic.lower() or "i350" in
> self.nic.lower():
> > +        elif "niantic" in self.nic.lower() or "powerville" in
> self.nic.lower():
> >               outerL4Type = "(outer) L4 type: Unknown"
> >               outerL3Type = "(outer) L3 type: IPV6"
> >
> > @@ -163,7 +174,7 @@ class TestUniPacket(TestCase):
> >           # delete the unsupported packet based on nic type
> >           if "fortville" in self.nic.lower():
> >               pktType.pop("MAC_IPv6FRAG_PKT_N")
> > -        elif "niantic" in self.nic.lower() or "i350" in
> self.nic.lower():
> > +        elif "niantic" in self.nic.lower() or "powerville" in
> self.nic.lower():
> >               pktType.pop("MAC_IPv6FRAG_PKT_F")
> >
> >           self.run_test(pktType)
> > @@ -198,7 +209,7 @@ class TestUniPacket(TestCase):
> >           checked that whether IPv4 in IPv6 tunnel packet can be
> normally
> >           detected by Niantic and i350.
> >           """
> > -        if "niantic" not in self.nic.lower() and "i350" not in
> self.nic.lower():
> > +        if "niantic" not in self.nic.lower() and "powerville" not in
> self.nic.lower():
> >               return
> >
> >           pktType = {
> > @@ -361,4 +372,15 @@ class TestUniPacket(TestCase):
> >           Nothing to do.
> >           """
> >           self.dut.kill_all()
> > +        """
> > +        Restore the config file and recompile the package.
> > +        """
> > +        [arch, machine, env, toolchain] = self.target.split('-')
> > +        if "fortville" in self.nic.lower():
> > +            self.dut.send_expect("sed -i -e
> 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/"
> > +                             +
> "CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_%s" % env, "# ",
> 30)
> > +        elif "niantic" in self.nic.lower():
> > +            self.dut.send_expect("sed -i -e
> 's/CONFIG_RTE_IXGBE_INC_VECTOR=.*$/"
> > +                             + "CONFIG_RTE_IXGBE_INC_VECTOR=n/'
> config/common_%s" % env, "# ", 30)
> > +        self.dut.build_install_dpdk(self.target)
> Here is still disable vector mode. There's other approach is that use
> dts.rx_mode which is stripped from execution configuration file.
> Only when dts.rx_mode is "default" or "vector", this suite need change
> dpdk configuration.
In  i40e driver , the default of " vector "  is "n" in dpdk configuration file
And in ixgbe driver, the default of " vector "  is "y" in dpdk configuration file
> 
> 
> >           pass