[dts] [PATCH v2]tests uni_pkt: disable vector ixgbe driver and rename i350 to powerville

[Liu, Yong]

Lijuan, dpdk has default setting for Rx code method. But its mode can be changed by dts execution file.
So I mentioned that suite should depend on dts.rx_mode not dpdk default setting.

> -----Original Message-----
> From: Tu, LijuanX A
> Sent: Wednesday, December 02, 2015 9:20 AM
> To: Liu, Yong; dts at dpdk.org
> Subject: RE: [dts] [PATCH v2]tests uni_pkt: disable vector ixgbe driver
> and rename i350 to powerville
> 
> Hi yong,
> 
> 
> > -----Original Message-----
> > From: Liu, Yong
> > Sent: Wednesday, December 02, 2015 9:12 AM
> > To: Tu, LijuanX A; dts at dpdk.org
> > Subject: Re: [dts] [PATCH v2]tests uni_pkt: disable vector ixgbe driver
> > and rename i350 to powerville
> >
> > Hi Lijuan,
> > One comment about change rx/tx code path.
> >
> > On 12/01/2015 03:52 PM, Lijuan Tu wrote:
> > > Signed-off-by: Lijuan Tu <lijuanx.a.tu at intel.com>
> > > ---
> > >   tests/TestSuite_uni_pkt.py | 32 +++++++++++++++++++++++++++-----
> > >   1 file changed, 27 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/tests/TestSuite_uni_pkt.py b/tests/TestSuite_uni_pkt.py
> > > index ca72e75..60756c9 100644
> > > --- a/tests/TestSuite_uni_pkt.py
> > > +++ b/tests/TestSuite_uni_pkt.py
> > > @@ -63,6 +63,17 @@ class TestUniPacket(TestCase):
> > >           self.dut_port = valports[0]
> > >           tester_port = self.tester.get_local_port(self.dut_port)
> > >           self.tester_iface = self.tester.get_interface(tester_port)
> > > +        """
> > > +        Change config file to disable vector pmd and recompile the
> > package.
> > > +        """
> > > +        [arch, machine, env, toolchain] = self.target.split('-')
> > > +        if "fortville" in self.nic.lower():
> > > +            self.dut.send_expect("sed -i -e
> > 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/"
> > > +                             +
> > "CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_%s" % env, "# ",
> > 30)
> > > +        elif "niantic" in self.nic.lower():
> > > +            self.dut.send_expect("sed -i -e
> > 's/CONFIG_RTE_IXGBE_INC_VECTOR=.*$/"
> > > +                             + "CONFIG_RTE_IXGBE_INC_VECTOR=n/'
> > config/common_%s" % env, "# ", 30)
> > > +        self.dut.build_install_dpdk(self.target)
> > >           self.dut.send_expect(
> > >               "./%s/app/testpmd -c f -n 4 -- -i --txqflags=0x0" %
> > self.target, "testpmd>", 20)
> > >           self.dut.send_expect("set fwd rxonly", "testpmd>") @@ -
> > 117,7
> > > +128,7 @@ class TestUniPacket(TestCase):
> > >           """
> > >           if "fortville" in self.nic.lower():
> > >               outerL4Type = "(outer) L4 type: L4_NONFRAG"
> > > -        elif "niantic" in self.nic.lower() or "i350" in
> > self.nic.lower():
> > > +        elif "niantic" in self.nic.lower() or "powerville" in
> > self.nic.lower():
> > >               outerL4Type = "(outer) L4 type: Unknown"
> > >
> > >           pktType = {
> > > @@ -135,7 +146,7 @@ class TestUniPacket(TestCase):
> > >           if "fortville" in self.nic.lower():
> > >               pktType.pop("MAC_IPihl_PKT")
> > >               pktType.pop("MAC_IPihl_SCTP_PKT")
> > > -        elif "niantic" in self.nic.lower() or "i350" in
> > self.nic.lower():
> > > +        elif "niantic" in self.nic.lower() or "powerville" in
> > self.nic.lower():
> > >               pktType.pop("MAC_IP_ICMP_PKT")
> > >               pktType.pop("MAC_IPFRAG_TCP_PKT")
> > >
> > > @@ -148,7 +159,7 @@ class TestUniPacket(TestCase):
> > >           if "fortville" in self.nic.lower():
> > >               outerL4Type = "(outer) L4 type: L4_NONFRAG"
> > >               outerL3Type = "(outer) L3 type: IPV6_EXT_UNKNOWN"
> > > -        elif "niantic" in self.nic.lower() or "i350" in
> > self.nic.lower():
> > > +        elif "niantic" in self.nic.lower() or "powerville" in
> > self.nic.lower():
> > >               outerL4Type = "(outer) L4 type: Unknown"
> > >               outerL3Type = "(outer) L3 type: IPV6"
> > >
> > > @@ -163,7 +174,7 @@ class TestUniPacket(TestCase):
> > >           # delete the unsupported packet based on nic type
> > >           if "fortville" in self.nic.lower():
> > >               pktType.pop("MAC_IPv6FRAG_PKT_N")
> > > -        elif "niantic" in self.nic.lower() or "i350" in
> > self.nic.lower():
> > > +        elif "niantic" in self.nic.lower() or "powerville" in
> > self.nic.lower():
> > >               pktType.pop("MAC_IPv6FRAG_PKT_F")
> > >
> > >           self.run_test(pktType)
> > > @@ -198,7 +209,7 @@ class TestUniPacket(TestCase):
> > >           checked that whether IPv4 in IPv6 tunnel packet can be
> > normally
> > >           detected by Niantic and i350.
> > >           """
> > > -        if "niantic" not in self.nic.lower() and "i350" not in
> > self.nic.lower():
> > > +        if "niantic" not in self.nic.lower() and "powerville" not in
> > self.nic.lower():
> > >               return
> > >
> > >           pktType = {
> > > @@ -361,4 +372,15 @@ class TestUniPacket(TestCase):
> > >           Nothing to do.
> > >           """
> > >           self.dut.kill_all()
> > > +        """
> > > +        Restore the config file and recompile the package.
> > > +        """
> > > +        [arch, machine, env, toolchain] = self.target.split('-')
> > > +        if "fortville" in self.nic.lower():
> > > +            self.dut.send_expect("sed -i -e
> > 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/"
> > > +                             +
> > "CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_%s" % env, "# ",
> > 30)
> > > +        elif "niantic" in self.nic.lower():
> > > +            self.dut.send_expect("sed -i -e
> > 's/CONFIG_RTE_IXGBE_INC_VECTOR=.*$/"
> > > +                             + "CONFIG_RTE_IXGBE_INC_VECTOR=n/'
> > config/common_%s" % env, "# ", 30)
> > > +        self.dut.build_install_dpdk(self.target)
> > Here is still disable vector mode. There's other approach is that use
> > dts.rx_mode which is stripped from execution configuration file.
> > Only when dts.rx_mode is "default" or "vector", this suite need change
> > dpdk configuration.
> In  i40e driver , the default of " vector "  is "n" in dpdk configuration
> file
> And in ixgbe driver, the default of " vector "  is "y" in dpdk
> configuration file
> >
> >
> > >           pass