[dts] [PATCH v3] test_plans/pvp_multi_paths_virtio_single_core_performance: add virtio1.1 inorder path test case

[Yinan]

From: Wang Yinan <yinan.wang at intel.com>

add virtio1.1 inorder path test in pvp_multi_paths_virtio_single_core_performance_test_plan.rst

Signed-off-by: Wang Yinan <yinan.wang at intel.com>
---
 ...rtio_single_core_performance_test_plan.rst | 80 ++++++++++---------
 1 file changed, 43 insertions(+), 37 deletions(-)

diff --git a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
index 5c64d5d..18c192c 100644
--- a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
+++ b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
@@ -30,24 +30,26 @@
    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
    OF THE POSSIBILITY OF SUCH DAMAGE.
 
-========================================
-PVP multi-paths virtio single core Tests
-========================================
+=========================================================
+vhost/virtio pvp multi-paths virtio single core test plan
+=========================================================
 
 Description
 ===========
 
-Benchmark PVP virtio single core performance with 7 TX/RX PATHs.
-Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder 
-no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
-For virtio single core test,give 2 cores for vhost and 1 core for virtio, use io fwd at vhost side to lower the vhost workload.
+Benchmark pvp virtio single core performance with 8 tx/rx paths.
+Includes mergeable, normal, vector_rx, inorder mergeable, 
+inorder no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal path.
+Give 2 cores for vhost and 1 core for virtio, set io fwd at vhost side to lower the vhost workload.
 
-Test Case 1: virtio single core performance test with Virtio 1.1 mergeable path
-===============================================================================
+Test flow
+=========
 
-flow: 
 TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
 
+Test Case 1: virtio single core performance test with virtio 1.1 mergeable path
+===============================================================================
+
 1. Bind one port to igb_uio, then launch vhost by below command::
 
     rm -rf vhost-net*
@@ -60,18 +62,15 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
 
     ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
     --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1 \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
     -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
     >set fwd mac
     >start
 
 3. Send packet with packet generator with different packet size, check the throughput.
 
-Test Case 2: virtio single core performance test with Virtio 1.1 no-mergeable path
-==================================================================================
-
-flow: 
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+Test Case 2: virtio single core performance test with virtio 1.1 normal path
+============================================================================
 
 1. Bind one port to igb_uio, then launch vhost by below command::
 
@@ -85,19 +84,16 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
 
     ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
     --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0 \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
     -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
     >set fwd mac
     >start
 
 3. Send packet with packet generator with different packet size, check the throughput.
 
-Test Case 3: virtio single core performance test with Inorder mergeable path
+Test Case 3: virtio single core performance test with inorder mergeable path
 ============================================================================
 
-flow: 
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
 1. Bind one port to igb_uio, then launch vhost by below command::
 
     rm -rf vhost-net*
@@ -117,12 +113,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
 
 3. Send packet with packet generator with different packet size, check the throughput.
 
-Test Case 4: virtio single core performance test with Inorder no-mergeable path
+Test Case 4: virtio single core performance test with inorder no-mergeable path
 ===============================================================================
 
-flow: 
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
 1. Bind one port to igb_uio, then launch vhost by below command::
 
     rm -rf vhost-net*
@@ -142,12 +135,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
 
 3. Send packet with packet generator with different packet size, check the throughput.
 
-Test Case 5: virtio single core performance test with Mergeable path
+Test Case 5: virtio single core performance test with mergeable path
 ====================================================================
 
-flow: 
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
 1. Bind one port to igb_uio, then launch vhost by below command::
 
     rm -rf vhost-net*
@@ -167,12 +157,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
 
 3. Send packet with packet generator with different packet size, check the throughput.
 
-Test Case 6: virtio single core performance test with Normal path
+Test Case 6: virtio single core performance test with normal path
 =================================================================
 
-flow: 
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
 1. Bind one port to igb_uio, then launch vhost by below command::
 
     rm -rf vhost-net*
@@ -192,12 +179,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
 
 3. Send packet with packet generator with different packet size, check the throughput.
 
-Test Case 7: virtio single core performance test with Vector_RX path
+Test Case 7: virtio single core performance test with vector_rx path
 ====================================================================
 
-flow: 
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
 1. Bind one port to igb_uio, then launch vhost by below command::
 
     rm -rf vhost-net*
@@ -216,3 +200,25 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
     >start
 
 3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 8: virtio single core performance test with virtio 1.1 inorder path
+=============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+    testpmd>set fwd io
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+    >set fwd mac
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
\ No newline at end of file
-- 
2.17.1