[dts] [PATCH v3] test_plans/pvp_multi_paths_vhost_single_core_performance: add virtio1.1 inorder path test case

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Yinan
> Sent: Sunday, April 14, 2019 1:38 PM
> To: dts at dpdk.org
> Cc: Wang, Yinan <yinan.wang at intel.com>
> Subject: [dts] [PATCH v3]
> test_plans/pvp_multi_paths_vhost_single_core_performance: add virtio1.1
> inorder path test case
> 
> From: Wang Yinan <yinan.wang at intel.com>
> 
> add virtio1.1 inorder path test in
> pvp_multi_paths_vhost_single_core_performance_test_plan.rst
> 
> Signed-off-by: Wang Yinan <yinan.wang at intel.com>
> ---
>  ...host_single_core_performance_test_plan.rst | 88 ++++++++++---------
>  1 file changed, 47 insertions(+), 41 deletions(-)
> 
> diff --git
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> index 247f162..9a8f8e3 100644
> ---
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> +++
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan
> +++ .rst
> @@ -30,23 +30,26 @@
>     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
>     OF THE POSSIBILITY OF SUCH DAMAGE.
> 
> -=======================================
> -PVP multi-paths vhost single core Tests -
> =======================================
> +
> +========================================================
> +vhost/virtio pvp multi-paths vhost single core test plan
> +========================================================
> 
>  Description
>  ===========
> 
> -Benchmark PVP vhost single core performance with 7 TX/RX PATHs.
> -Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder -no-
> mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> -For vhost single core test, give 2 cores for virtio and 1 core for vhost, use io
> fwd at virtio side to lower the virtio workload.
> +Benchmark PVP vhost single core performance with 8 tx/rx paths.
> +Includes mergeable, normal, vector_rx, inorder mergeable, inorder
> +no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal
> path.
> +Give 2 cores for virtio and 1 core for vhost, set io fwd at virtio side to lower
> the virtio workload.
> 
> -Test Case 1: vhost single core performance test with Virtio 1.1 mergeable
> path -
> ================================================================
> ==============
> +Test flow
> +=========
> 
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +Test Case 1: vhost single core performance test with virtio 1.1
> +mergeable path
> +===============================================================
> ========
> +=======
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
> @@ -59,18 +62,15 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> 2. Launch virtio-user by below command::
> 
>      ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> -    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=1 \
> +
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,pa
> + cked_vq=1,mrg_rxbuf=1,in_order=0 \
>      -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
>      >set fwd io
>      >start
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 2: vhost single core performance test with Virtio 1.1 no-mergeable
> path -
> ================================================================
> =================
> -
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +Test Case 2: vhost single core performance test with virtio 1.1 normal
> +path
> +===============================================================
> ========
> +====
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
> @@ -83,19 +83,16 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> 2. Launch virtio-user by below command::
> 
>      ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> -    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0 \
> +
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,pa
> + cked_vq=1,mrg_rxbuf=0,in_order=0 \
>      -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
>      >set fwd io
>      >start
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 3: vhost single core performance test with Inorder mergeable path
> +Test Case 3: vhost single core performance test with inorder mergeable
> +path
> 
> ================================================================
> ===========
> 
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> -
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
> @@ -114,12 +111,9 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 4: vhost single core performance test with Inorder no-mergeable
> path
> +Test Case 4: vhost single core performance test with inorder
> +no-mergeable path
> 
> ================================================================
> ==============
> 
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> -
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
> @@ -138,11 +132,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 5: vhost single core performance test with Mergeable path -
> ================================================================
> =======
> -
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +Test Case 5: vhost single core performance test with mergeable path
> +===============================================================
> ====
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
> @@ -162,11 +153,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 6: vhost single core performance test with Normal path -
> ================================================================
> =======
> -
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +Test Case 6: vhost single core performance test with normal path
> +===============================================================
> =
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
> @@ -186,11 +174,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 7: vhost single core performance test with Vector_RX path -
> ================================================================
> =======
> -
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +Test Case 7: vhost single core performance test with vector_rx path
> +===============================================================
> ====
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
> @@ -209,3 +194,24 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
>      >start
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 8: vhost single core performance test with virtio 1.1 inorder
> +path
> +===============================================================
> ========
> +=====
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> +    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024
> --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> +    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> +    >set fwd io
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> --
> 2.17.1