[dts] [PATCH V5] tests/etag:add vf driver vfio-pci
Jianwei Mei
jianweix.mei at intel.com
Tue Apr 16 12:46:47 CEST 2019
Signed-off-by: Jianwei Mei <jianweix.mei at intel.com>
---
tests/TestSuite_etag.py | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/tests/TestSuite_etag.py b/tests/TestSuite_etag.py
index 7cf93eb..36d7945 100644
--- a/tests/TestSuite_etag.py
+++ b/tests/TestSuite_etag.py
@@ -51,9 +51,10 @@ from packet import Packet
VM_CORES_MASK = 'all'
class TestEtag(TestCase):
+ supported_vf_driver = ['pci-stub', 'vfio-pci']
def set_up_all(self):
self.dut_ports = self.dut.get_ports(self.nic)
- self.verify(self.nic in ['sagepond'], '802.1BR only support by sagepond')
+ self.verify(self.nic in ['sagepond','sageville'], '802.1BR only support by sagepond and sageville')
self.verify(len(self.dut_ports) >= 1, 'Insufficient ports')
self.src_intf = self.tester.get_interface(self.tester.get_local_port(0))
self.src_mac = self.tester.get_mac(self.tester.get_local_port(0))
@@ -78,9 +79,20 @@ class TestEtag(TestCase):
self.dut.generate_sriov_vfs_by_port(self.used_dut_port_0, 2, driver=driver)
self.sriov_vfs_port_0 = self.dut.ports_info[self.used_dut_port_0]['vfs_port']
+ # set vf assign method and vf driver
+ self.vf_driver = self.get_suite_cfg()['vf_driver']
+ if self.vf_driver is None:
+ self.vf_driver = 'pci-stub'
+ self.verify(self.vf_driver in self.supported_vf_driver, "Unspported vf driver")
+ if self.vf_driver == 'pci-stub':
+ self.vf_assign_method = 'pci-assign'
+ else:
+ self.vf_assign_method = 'vfio-pci'
+ self.dut.send_expect('modprobe vfio-pci', '#')
+
try:
for port in self.sriov_vfs_port_0:
- port.bind_driver('pci-stub')
+ port.bind_driver(self.vf_driver)
time.sleep(1)
vf0_prop = {'opt_host': self.sriov_vfs_port_0[0].pci}
@@ -91,12 +103,12 @@ class TestEtag(TestCase):
eal_param = '-b %(vf0)s -b %(vf1)s' % {'vf0': self.sriov_vfs_port_0[0].pci,
'vf1': self.sriov_vfs_port_0[1].pci}
- self.preset_host_testpmd('1S/2C/2T', eal_param)
+ self.preset_host_testpmd(VM_CORES_MASK, eal_param)
# set up VM0 ENV
self.vm0 = QEMUKvm(self.dut, 'vm0', 'vf_etag')
- self.vm0.set_vm_device(driver='pci-assign', **vf0_prop)
- self.vm0.set_vm_device(driver='pci-assign', **vf1_prop)
+ self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop)
+ self.vm0.set_vm_device(driver=self.vf_assign_method, **vf1_prop)
self.vm_dut_0 = self.vm0.start()
if self.vm_dut_0 is None:
raise Exception('Set up VM0 ENV failed!')
@@ -290,7 +302,7 @@ class TestEtag(TestCase):
else:
# Same E-tag forwarding to VF0, Send 802.1BR packet with broadcast mac and
# check packet only received on VF0 or VF1
- host_cmds = [['E-tag set filter add e-tag-id 1000 dst-pool %d port 0'%test_type[-1:]],
+ host_cmds = [['E-tag set filter add e-tag-id 1000 dst-pool %d port 0'% int(test_type[-1:])],
['set fwd rxonly'],
['set verbose 1'],
['start']]
--
2.17.2
More information about the dts
mailing list