[dts] [PATCH V5] tests/etag:add vf driver vfio-pci

[Tu, Lijuan]

Applying: tests/etag:add vf driver vfio-pci
.git/rebase-apply/patch:35: trailing whitespace.

warning: 1 line adds whitespace errors.

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Jianwei Mei
> Sent: Tuesday, April 16, 2019 3:47 AM
> To: dts at dpdk.org
> Cc: Mei, JianweiX <jianweix.mei at intel.com>
> Subject: [dts] [PATCH V5] tests/etag:add vf driver vfio-pci
> 
> Signed-off-by: Jianwei Mei <jianweix.mei at intel.com>
> ---
>  tests/TestSuite_etag.py | 24 ++++++++++++++++++------
>  1 file changed, 18 insertions(+), 6 deletions(-)
> 
> diff --git a/tests/TestSuite_etag.py b/tests/TestSuite_etag.py index
> 7cf93eb..36d7945 100644
> --- a/tests/TestSuite_etag.py
> +++ b/tests/TestSuite_etag.py
> @@ -51,9 +51,10 @@ from packet import Packet  VM_CORES_MASK = 'all'
> 
>  class TestEtag(TestCase):
> +    supported_vf_driver = ['pci-stub', 'vfio-pci']
>      def set_up_all(self):
>          self.dut_ports = self.dut.get_ports(self.nic)
> -        self.verify(self.nic in ['sagepond'], '802.1BR only support by sagepond')
> +        self.verify(self.nic in ['sagepond','sageville'], '802.1BR only
> + support by sagepond and sageville')
>          self.verify(len(self.dut_ports) >= 1, 'Insufficient ports')
>          self.src_intf = self.tester.get_interface(self.tester.get_local_port(0))
>          self.src_mac =  self.tester.get_mac(self.tester.get_local_port(0))
> @@ -78,9 +79,20 @@ class TestEtag(TestCase):
>          self.dut.generate_sriov_vfs_by_port(self.used_dut_port_0, 2,
> driver=driver)
>          self.sriov_vfs_port_0 =
> self.dut.ports_info[self.used_dut_port_0]['vfs_port']
> 
> +        # set vf assign method and vf driver
> +        self.vf_driver = self.get_suite_cfg()['vf_driver']
> +        if self.vf_driver is None:
> +            self.vf_driver = 'pci-stub'
> +        self.verify(self.vf_driver in self.supported_vf_driver, "Unspported vf
> driver")
> +        if self.vf_driver == 'pci-stub':
> +            self.vf_assign_method = 'pci-assign'
> +        else:
> +            self.vf_assign_method = 'vfio-pci'
> +            self.dut.send_expect('modprobe vfio-pci', '#')
> +
>          try:
>              for port in self.sriov_vfs_port_0:
> -                port.bind_driver('pci-stub')
> +                port.bind_driver(self.vf_driver)
> 
>              time.sleep(1)
>              vf0_prop = {'opt_host': self.sriov_vfs_port_0[0].pci} @@ -91,12
> +103,12 @@ class TestEtag(TestCase):
>              eal_param = '-b %(vf0)s -b %(vf1)s' % {'vf0': self.sriov_vfs_port_0[0].pci,
>                                                     'vf1': self.sriov_vfs_port_0[1].pci}
> 
> -            self.preset_host_testpmd('1S/2C/2T', eal_param)
> +            self.preset_host_testpmd(VM_CORES_MASK, eal_param)
> 
>              # set up VM0 ENV
>              self.vm0 = QEMUKvm(self.dut, 'vm0', 'vf_etag')
> -            self.vm0.set_vm_device(driver='pci-assign', **vf0_prop)
> -            self.vm0.set_vm_device(driver='pci-assign', **vf1_prop)
> +            self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop)
> +            self.vm0.set_vm_device(driver=self.vf_assign_method,
> + **vf1_prop)
>              self.vm_dut_0 = self.vm0.start()
>              if self.vm_dut_0 is None:
>                  raise Exception('Set up VM0 ENV failed!') @@ -290,7 +302,7 @@
> class TestEtag(TestCase):
>              else:
>                  # Same E-tag forwarding to VF0, Send 802.1BR packet with
> broadcast mac and
>                  # check packet only received on VF0 or VF1
> -                host_cmds = [['E-tag set filter add e-tag-id 1000 dst-pool %d port
> 0'%test_type[-1:]],
> +                host_cmds = [['E-tag set filter add e-tag-id 1000
> + dst-pool %d port 0'% int(test_type[-1:])],
>                               ['set fwd rxonly'],
>                               ['set verbose 1'],
>                               ['start']]
> --
> 2.17.2