[dts] [PATCH] test_plans: add test case for pvp multi-queues test

Yinan yinan.wang at intel.com
Wed Feb 27 01:43:13 CET 2019
Previous message: [dts] [PATCH V2] remove duplicate external mempool handler test plan and script
Next message: [dts] [PATCH] test_plans: add test case for pvp multi-queues test
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
From: Wang Yinan <yinan.wang at intel.com>

  add pvp_virtio_user_multi_queues_test_plan.rst
---
 ...pvp_virtio_user_multi_queues_test_plan.rst | 259 ++++++++++++++++++
 1 file changed, 259 insertions(+)
 create mode 100644 test_plans/pvp_virtio_user_multi_queues_test_plan.rst

diff --git a/test_plans/pvp_virtio_user_multi_queues_test_plan.rst b/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
new file mode 100644
index 0000000..abb3616
--- /dev/null
+++ b/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
@@ -0,0 +1,259 @@
+.. Copyright (c) <2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=====================================
+PVP virtio-user multi-queues Tests
+=====================================
+
+Description
+===========
+
+Benchmark pvp virtio-user multi-queues test with 7 TX/RX PATHs.
+Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder 
+no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
+
+Test Case 1: pvp 2 queues test with Virtio 1.1 mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+Test Case 2: pvp 2 queues test with Virtio 1.1 no-mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+Test Case 3: pvp test with Inorder mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+Test Case 4: pvp test with Inorder no-mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+Test Case 5: pvp test with Mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+Test Case 6: pvp test with Normal path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+Test Case 7: pvp test with Vector_RX path
+=======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
-- 
2.17.1
Previous message: [dts] [PATCH V2] remove duplicate external mempool handler test plan and script
Next message: [dts] [PATCH] test_plans: add test case for pvp multi-queues test
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the dts mailing list