[dts] [PATCH] test_plans: add test case for pvp multi-queues test
Tu, Lijuan
lijuan.tu at intel.com
Thu Feb 28 12:11:51 CET 2019
Applying: test_plans: add test case for pvp multi-queues test
.git/rebase-apply/patch:52: trailing whitespace.
Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder
.git/rebase-apply/patch:58: trailing whitespace.
flow:
.git/rebase-apply/patch:89: trailing whitespace.
flow:
.git/rebase-apply/patch:120: trailing whitespace.
flow:
.git/rebase-apply/patch:151: trailing whitespace.
flow:
warning: squelched 3 whitespace errors
warning: 8 lines add whitespace errors.
> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Yinan
> Sent: Wednesday, February 27, 2019 8:43 AM
> To: dts at dpdk.org
> Cc: Wang, Yinan <yinan.wang at intel.com>
> Subject: [dts] [PATCH] test_plans: add test case for pvp multi-queues test
>
> From: Wang Yinan <yinan.wang at intel.com>
>
> add pvp_virtio_user_multi_queues_test_plan.rst
> ---
> ...pvp_virtio_user_multi_queues_test_plan.rst | 259 ++++++++++++++++++
> 1 file changed, 259 insertions(+)
> create mode 100644 test_plans/pvp_virtio_user_multi_queues_test_plan.rst
>
> diff --git a/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
> b/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
> new file mode 100644
> index 0000000..abb3616
> --- /dev/null
> +++ b/test_plans/pvp_virtio_user_multi_queues_test_plan.rst
> @@ -0,0 +1,259 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=====================================
> +PVP virtio-user multi-queues Tests
> +=====================================
> +
> +Description
> +===========
> +
> +Benchmark pvp virtio-user multi-queues test with 7 TX/RX PATHs.
> +Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder
> +no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> +
> +Test Case 1: pvp 2 queues test with Virtio 1.1 mergeable path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -
> i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput with
> below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 2: pvp 2 queues test with Virtio 1.1 no-mergeable path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -
> i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput with
> below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 3: pvp test with Inorder mergeable path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -
> i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput with
> below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 4: pvp test with Inorder no-mergeable path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -
> i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput with
> below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 5: pvp test with Mergeable path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -
> i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=0,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput with
> below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 6: pvp test with Normal path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -
> i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput with
> below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 7: pvp test with Vector_RX path
> +================================================================
> =======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -
> i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --rss-ip --nb-cores=2 --rxq=2 --txq=2
> + >set fwd mac
> + >start
> +
> +3. Send different ip packets with packet generator, check the throughput with
> below command::
> +
> + testpmd>show port stats all
> +
> +4. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> --
> 2.17.1
More information about the dts
mailing list