[dts] [PATCH] test_plans: add test plan for pvp multi-paths test

Yinan yinan.wang at intel.com
Wed Feb 27 01:52:20 CET 2019
Previous message: [dts] [PATCH] test_plans: add test case for pvp multi-queues test
Next message: [dts] [PATCH] test_plans: add test plan for pvp multi-paths test
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
From: Wang Yinan <yinan.wang at intel.com>

  pvp_qemu_multi_paths_port_restart_test_plan.rst
---
 ...emu_multi_paths_port_restart_test_plan.rst | 315 ++++++++++++++++++
 1 file changed, 315 insertions(+)
 create mode 100644 test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst

diff --git a/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst b/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
new file mode 100644
index 0000000..7701327
--- /dev/null
+++ b/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
@@ -0,0 +1,315 @@
+.. Copyright (c) <2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==========================================
+Vhost/Virtio qemu multi-paths and port restart Tests
+==========================================
+
+Benchmark pvp qemu test with 3 RX/TX PATHs,includes Mergeable, Normal, Vector_RX.
+Cover virtio 1.0 and virtio 0.95.Also cover port restart test with each path.
+
+
+Test Case: PVP test with virtio 0.95 mergeable path
+======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+    -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch VM with mrg_rxbuf feature on::
+
+    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
+    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
+    -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd::
+    ./testpmd -c 0x3 -n 3 -- -i \
+    --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+    testpmd>show port stats all
+
+5. Port restart 100 times by below command and re-calculate the average througnput::
+
+    testpmd>stop
+    testpmd>start
+    ...
+    testpmd>stop
+    testpmd>clear port stats all
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case: PVP test with virtio 0.95 normal path
+======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+    -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch VM with mrg_rxbuf feature off::
+
+    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
+    -vnc :10
+   
+
+3. On VM, bind virtio net to igb_uio and run testpmd with tx-offloads::
+    ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x0 --enable-hw-vlan-strip \
+    --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+    testpmd>show port stats all
+
+5. Port restart by below command and re-calculate the average througnput::
+
+    testpmd>stop
+    testpmd>clear port stats all
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case: PVP test with virtio 0.95 vrctor_rx path
+======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+    -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch VM with mrg_rxbuf feature off::
+
+    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
+    -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd without ant tx-offloads::
+    ./testpmd -c 0x3 -n 3 -- -i \
+    --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+    testpmd>show port stats all
+
+5. Port restart by below command and re-calculate the average througnput::
+
+    testpmd>stop
+    testpmd>clear port stats all
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case: PVP test with virtio 1.0 mergeable path
+======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+    -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to enable virtio 1.0::
+
+    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
+    -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd ::
+    ./testpmd -c 0x3 -n 3 -- -i \
+    --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+    testpmd>show port stats all
+
+5. Port restart by below command and re-calculate the average througnput::
+
+    testpmd>stop
+    testpmd>clear port stats all
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case: PVP test with virtio 1.0 normal path
+======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+    -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to enable virtio 1.0::
+
+    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
+    -vnc :10
+   
+3. On VM, bind virtio net to igb_uio and run testpmd with tx-offloads::
+    ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x0 --enable-hw-vlan-strip\
+    --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+    testpmd>show port stats all
+
+5. Port restart by below command and re-calculate the average througnput::
+
+    testpmd>stop
+    testpmd>clear port stats all
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case: PVP test with virtio 1.0 vrctor_rx path
+======================================================================
+
+flow: 
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch testpmd by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+    -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to enable virtio 1.0::
+
+    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
+    -vnc :10
+
+3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
+    ./testpmd -c 0x3 -n 3 -- -i \
+    --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+4. Send packets by packet generator with different packet sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
+
+    testpmd>show port stats all
+
+5. Port restart by below command and re-calculate the average througnput::
+
+    testpmd>stop
+    testpmd>clear port stats all
+    testpmd>start
+    testpmd>show port stats all
+
-- 
2.17.1
Previous message: [dts] [PATCH] test_plans: add test case for pvp multi-queues test
Next message: [dts] [PATCH] test_plans: add test plan for pvp multi-paths test
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the dts mailing list