[dts] [PATCH] test_plans: add test plan for pvp multi-paths test

Tu, Lijuan lijuan.tu at intel.com
Thu Feb 28 12:11:32 CET 2019
Previous message: [dts] [PATCH] test_plans: add test plan for pvp multi-paths test
Next message: [dts] [PATCH] test_plans: add case for loopback multi-queue test
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Applying: test_plans: add test plan for pvp multi-paths test
.git/rebase-apply/patch:55: trailing whitespace.
flow:
.git/rebase-apply/patch:104: trailing whitespace.
flow:
.git/rebase-apply/patch:128: trailing whitespace.

.git/rebase-apply/patch:150: trailing whitespace.
flow:
.git/rebase-apply/patch:195: trailing whitespace.
flow:
warning: squelched 4 whitespace errors
warning: 9 lines add whitespace errors.

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Yinan
> Sent: Wednesday, February 27, 2019 8:52 AM
> To: dts at dpdk.org
> Cc: Wang, Yinan <yinan.wang at intel.com>
> Subject: [dts] [PATCH] test_plans: add test plan for pvp multi-paths test
> 
> From: Wang Yinan <yinan.wang at intel.com>
> 
>   pvp_qemu_multi_paths_port_restart_test_plan.rst
> ---
>  ...emu_multi_paths_port_restart_test_plan.rst | 315 ++++++++++++++++++
>  1 file changed, 315 insertions(+)
>  create mode 100644
> test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
> 
> diff --git a/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
> b/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
> new file mode 100644
> index 0000000..7701327
> --- /dev/null
> +++ b/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
> @@ -0,0 +1,315 @@
> +.. Copyright (c) <2019>, Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==========================================
> +Vhost/Virtio qemu multi-paths and port restart Tests
> +==========================================
> +
> +Benchmark pvp qemu test with 3 RX/TX PATHs,includes Mergeable, Normal,
> Vector_RX.
> +Cover virtio 1.0 and virtio 0.95.Also cover port restart test with each path.
> +
> +
> +Test Case: PVP test with virtio 0.95 mergeable path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> +    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> +    -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch VM with mrg_rxbuf feature on::
> +
> +    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> +    -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> +    -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img  \
> +    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> +    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> +    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> +    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> +    -chardev socket,id=char0,path=./vhost-net \
> +    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> +    -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024
> ,tx_queue_size=1024 \
> +    -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd::
> +    ./testpmd -c 0x3 -n 3 -- -i \
> +    --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> +    testpmd>show port stats all
> +
> +5. Port restart 100 times by below command and re-calculate the average
> througnput::
> +
> +    testpmd>stop
> +    testpmd>start
> +    ...
> +    testpmd>stop
> +    testpmd>clear port stats all
> +    testpmd>start
> +    testpmd>show port stats all
> +
> +Test Case: PVP test with virtio 0.95 normal path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> +    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> +    -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch VM with mrg_rxbuf feature off::
> +
> +    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> +    -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> +    -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img  \
> +    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> +    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> +    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> +    -chardev socket,id=char0,path=./vhost-net \
> +    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> +    -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024
> ,tx_queue_size=1024 \
> +    -vnc :10
> +
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd with tx-offloads::
> +    ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x0 --enable-hw-vlan-strip \
> +    --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> +    testpmd>show port stats all
> +
> +5. Port restart by below command and re-calculate the average througnput::
> +
> +    testpmd>stop
> +    testpmd>clear port stats all
> +    testpmd>start
> +    testpmd>show port stats all
> +
> +Test Case: PVP test with virtio 0.95 vrctor_rx path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> +    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> +    -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch VM with mrg_rxbuf feature off::
> +
> +    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> +    -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> +    -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img  \
> +    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> +    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> +    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> +    -chardev socket,id=char0,path=./vhost-net \
> +    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> +    -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024
> ,tx_queue_size=1024 \
> +    -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd without ant tx-offloads::
> +    ./testpmd -c 0x3 -n 3 -- -i \
> +    --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> +    testpmd>show port stats all
> +
> +5. Port restart by below command and re-calculate the average througnput::
> +
> +    testpmd>stop
> +    testpmd>clear port stats all
> +    testpmd>start
> +    testpmd>show port stats all
> +
> +Test Case: PVP test with virtio 1.0 mergeable path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> +    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> +    -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to
> enable virtio 1.0::
> +
> +    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> +    -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> +    -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img  \
> +    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> +    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> +    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> +    -chardev socket,id=char0,path=./vhost-net \
> +    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> +    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-
> modern=false,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
> +    -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd ::
> +    ./testpmd -c 0x3 -n 3 -- -i \
> +    --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> +    testpmd>show port stats all
> +
> +5. Port restart by below command and re-calculate the average througnput::
> +
> +    testpmd>stop
> +    testpmd>clear port stats all
> +    testpmd>start
> +    testpmd>show port stats all
> +
> +Test Case: PVP test with virtio 1.0 normal path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> +    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> +    -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to
> enable virtio 1.0::
> +
> +    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> +    -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> +    -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img  \
> +    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> +    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> +    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> +    -chardev socket,id=char0,path=./vhost-net \
> +    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> +    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-
> modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
> +    -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd with tx-offloads::
> +    ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x0 --enable-hw-vlan-strip\
> +    --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> +    testpmd>show port stats all
> +
> +5. Port restart by below command and re-calculate the average througnput::
> +
> +    testpmd>stop
> +    testpmd>clear port stats all
> +    testpmd>start
> +    testpmd>show port stats all
> +
> +Test Case: PVP test with virtio 1.0 vrctor_rx path
> +================================================================
> ======
> +
> +flow:
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch testpmd by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
> +    --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
> +    -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch VM with 1 virtio, note: we need add "disable-modern=false" to
> enable virtio 1.0::
> +
> +    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> +    -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> +    -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img  \
> +    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> +    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> +    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> +    -chardev socket,id=char0,path=./vhost-net \
> +    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> +    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-
> modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
> +    -vnc :10
> +
> +3. On VM, bind virtio net to igb_uio and run testpmd without tx-offloads::
> +    ./testpmd -c 0x3 -n 3 -- -i \
> +    --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +4. Send packets by packet generator with different packet
> sizes(64,128,256,512,1024,1280,1518), show throughput with below command::
> +
> +    testpmd>show port stats all
> +
> +5. Port restart by below command and re-calculate the average througnput::
> +
> +    testpmd>stop
> +    testpmd>clear port stats all
> +    testpmd>start
> +    testpmd>show port stats all
> +
> --
> 2.17.1
Previous message: [dts] [PATCH] test_plans: add test plan for pvp multi-paths test
Next message: [dts] [PATCH] test_plans: add case for loopback multi-queue test
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the dts mailing list