[dts] [PATCH] tests/TestSuite_vlan_ethertype_config.py: Added condition check to selected "tpids" based on cards.
thaq at marvell.com
thaq at marvell.com
Mon Jun 17 10:21:01 CEST 2019
From: Thanseerulhaq <thaq at marvell.com>
cavium_a063 cards supports only default tpids in rx mode so added conditon checks.
Listing "test_vlan_qinq_tpid" & test_vlan_change_tpid testcase of vlan_ethertype_config as invalid for cavium_a063 cards.
Signed-off-by: Thanseerulhaq <thaq at marvell.com>
---
conf/test_case_checklist.json | 16 ++++++++++++++++
tests/TestSuite_vlan_ethertype_config.py | 24 ++++++++++++++++++++----
2 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/conf/test_case_checklist.json b/conf/test_case_checklist.json
index 7b46bc1..1c4dc6d 100644
--- a/conf/test_case_checklist.json
+++ b/conf/test_case_checklist.json
@@ -2103,6 +2103,7 @@
"fortville_spirit_single",
"cavium_a034",
"cavium_a011",
+ "cavium_a063"
"fortville_25g"
],
"Target": [
@@ -2296,5 +2297,20 @@
"Bug ID": "",
"Comments": "the nic not support this case"
}
+ ],
+ "vlan_change_tpid": [
+ {
+ "OS": [
+ "ALL"
+ ],
+ "NIC": [
+ "cavium_a063"
+ ],
+ "Target": [
+ "ALL"
+ ],
+ "Bug ID": "",
+ "Comments": "the nic not support this case"
+ }
]
}
diff --git a/tests/TestSuite_vlan_ethertype_config.py b/tests/TestSuite_vlan_ethertype_config.py
index 684f68a..1cb1083 100644
--- a/tests/TestSuite_vlan_ethertype_config.py
+++ b/tests/TestSuite_vlan_ethertype_config.py
@@ -198,7 +198,11 @@ class TestVlanEthertypeConfig(TestCase):
self.dut.send_expect("vlan set strip off %s" %
dutRxPortId, "testpmd> ", 20)
rx_vlans = [1, random_vlan, MAX_VLAN]
- tpids = [0x8100, 0xA100]
+ # caium_a063 card support only default '0x8100' tpid in rx mode
+ if self.nic == "cavium_a063":
+ tpids = [0x8100]
+ else:
+ tpids = [0x8100, 0xA100]
for tpid in tpids:
self.dut.send_expect("vlan set outer tpid 0x%x %s" %
(tpid, dutRxPortId), "testpmd> ")
@@ -226,7 +230,11 @@ class TestVlanEthertypeConfig(TestCase):
dutRxPortId, "testpmd> ", 20)
self.dut.send_expect("start", "testpmd> ")
- tpids = [0x8100, 0xA100]
+ # caium_a063 card support only default '0x8100' tpid in rx mode
+ if self.nic == "cavium_a063":
+ tpids = [0x8100]
+ else:
+ tpids = [0x8100, 0xA100]
for tpid in tpids:
self.dut.send_expect("vlan set outer tpid 0x%x %s" %
(tpid, dutRxPortId), "testpmd> ")
@@ -254,7 +262,11 @@ class TestVlanEthertypeConfig(TestCase):
"vlan set strip on %s" % dutRxPortId, "testpmd> ", 20)
self.dut.send_expect("start", "testpmd> ", 20)
- tpids = [0x8100, 0xA100]
+ # caium_a063 card support only default '0x8100' tpid in rx mode
+ if self.nic == "cavium_a063":
+ tpids = [0x8100]
+ else:
+ tpids = [0x8100, 0xA100]
for tpid in tpids:
self.dut.send_expect("vlan set outer tpid 0x%x %s" %
(tpid, dutRxPortId), "testpmd> ")
@@ -279,7 +291,11 @@ class TestVlanEthertypeConfig(TestCase):
dutRxPortId, "testpmd> ", 20)
self.dut.send_expect("start", "testpmd> ")
- tpids = [0x8100, 0xA100]
+ # caium_a063 card support only default '0x8100' tpid in rx mode
+ if self.nic == "cavium_a063":
+ tpids = [0x8100]
+ else:
+ tpids = [0x8100, 0xA100]
for tpid in tpids:
self.dut.send_expect("vlan set outer tpid 0x%x %s" %
(tpid, dutTxPortId), "testpmd> ")
--
1.8.3.1
More information about the dts
mailing list