[dts] [PATCH v1] test_plans: update test commonds for vectorized cases in loopback_multi_queues_test_plan.rst

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Yinan
> Sent: Thursday, April 30, 2020 6:15 AM
> To: dts at dpdk.org
> Cc: Wang, Yinan <yinan.wang at intel.com>
> Subject: [dts] [PATCH v1] test_plans: update test commonds for vectorized
> cases in loopback_multi_queues_test_plan.rst
> 
> From: Wang Yinan <yinan.wang at intel.com>
> 
> Signed-off-by: Wang Yinan <yinan.wang at intel.com>
> ---
>  .../loopback_multi_queues_test_plan.rst       | 20 ++++++++-----------
>  1 file changed, 8 insertions(+), 12 deletions(-)
> 
> diff --git a/test_plans/loopback_multi_queues_test_plan.rst
> b/test_plans/loopback_multi_queues_test_plan.rst
> index e890b30..635b070 100644
> --- a/test_plans/loopback_multi_queues_test_plan.rst
> +++ b/test_plans/loopback_multi_queues_test_plan.rst
> @@ -38,10 +38,6 @@ This test plan test loopback multi-queues with split
> virtqueue mergeable, non-me  inorder mergeable, inorder non-mergeable
> path, and packed virtqueue mergeable, non-mergeable，inorder mergeable,
> inorder non-mergeable, vectorized path. And virtio-user support 8 queues in
> maximum, check performance could be  linear growth when enable 8 queues
> and 8 cores, notice cores should in same socket.
> -Note: Packed virtqueue vectorized path need below three initial
> requirements:
> -    1. AVX512 is allowed in config file and supported by compiler
> -    2. Host cpu support AVX512F
> -    3. ring size is power of two
> 
>  Test Case 1: loopback with virtio 1.1 mergeable path using 1 queue and 8
> queues
> ================================================================
> ===============
> @@ -358,7 +354,7 @@ Test Case 6: loopback with virtio 1.0 non-mergeable
> path using 1 queue and 8 que
> 
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=1,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 1,mrg_rxbuf=0,in_order=0,vectorized=1 \
>      -- -i --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> @@ -389,7 +385,7 @@ Test Case 6: loopback with virtio 1.0 non-mergeable
> path using 1 queue and 8 que
> 
>      ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 8,mrg_rxbuf=0,in_order=0,vectorized=1 \
>      -- -i --enable-hw-vlan-strip --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --
> rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> @@ -418,7 +414,7 @@ Test Case 7: loopback with virtio 1.0 vector_rx path
> using 1 queue and 8 queues
> 
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=1,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 1,mrg_rxbuf=0,in_order=0,vectorized=1 \
>      -- -i --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> @@ -449,7 +445,7 @@ Test Case 7: loopback with virtio 1.0 vector_rx path
> using 1 queue and 8 queues
> 
>      ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 8,mrg_rxbuf=0,in_order=0,vectorized=1 \
>      -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> @@ -537,7 +533,7 @@ Test Case 9: loopback with virtio 1.1 inorder non-
> mergeable path using 1 queue a
> 
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
>      -- -i --rx-offloads=0x10 --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> @@ -567,7 +563,7 @@ Test Case 9: loopback with virtio 1.1 inorder non-
> mergeable path using 1 queue a
> 
>      ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 8,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
>      -- -i --rx-offloads=0x10 --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> @@ -596,7 +592,7 @@ Test Case 10: loopback with virtio 1.1 vectorized path
> using 1 queue and 8 queue
> 
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
>      -- -i --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> @@ -627,7 +623,7 @@ Test Case 10: loopback with virtio 1.1 vectorized path
> using 1 queue and 8 queue
> 
>      ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 8,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
>      -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> --
> 2.17.1