[dts] [PATCH v1] test_plans: update test commonds for vectorized cases in loopback_virtio_user_server_mode_test_plan.rst

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Yinan
> Sent: Thursday, April 30, 2020 6:16 AM
> To: dts at dpdk.org
> Cc: Wang, Yinan <yinan.wang at intel.com>
> Subject: [dts] [PATCH v1] test_plans: update test commonds for vectorized
> cases in loopback_virtio_user_server_mode_test_plan.rst
> 
> From: Wang Yinan <yinan.wang at intel.com>
> 
> Signed-off-by: Wang Yinan <yinan.wang at intel.com>
> ---
>  ...back_virtio_user_server_mode_test_plan.rst | 20 ++++++++-----------
>  1 file changed, 8 insertions(+), 12 deletions(-)
> 
> diff --git a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
> b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
> index 2716c91..abf369a 100644
> --- a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
> +++ b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
> @@ -38,10 +38,6 @@ Virtio-user server mode is a feature to enable virtio-
> user as the server, vhost  virtio-user can reconnect back to vhost-user again;
> at another hand, virtio-user also can reconnect back to vhost-user after
> virtio-user is killed.
>  This feature test need cover different rx/tx paths with virtio 1.0 and virtio 1.1,
> includes split ring mergeable, non-mergeable, inorder mergeable,  inorder
> non-mergeable, vector_rx path and packed ring mergeable, non-mergeable,
> inorder non-mergeable, inorder mergeable, vectorized path.
> -Note: Packed virtqueue vectorized path need below three initial
> requirements:
> -    1. AVX512 is allowed in config file and supported by compiler
> -    2. Host cpu support AVX512F
> -    3. ring size is power of two
> 
>  Test Case 1: Basic test for packed ring server mode
> ===================================================
> @@ -315,7 +311,7 @@ Test Case 6: loopback reconnect test with split ring
> non-mergeable path and serv  2. Launch virtio-user as server mode with 2
> queues::
> 
>      ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
>      -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
>      >set fwd mac
>      >start tx_first 32
> @@ -350,7 +346,7 @@ Test Case 6: loopback reconnect test with split ring
> non-mergeable path and serv  8. Relaunch virtio-user and send packets::
> 
>      ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
>      -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
>      >set fwd mac
>      >start tx_first 32
> @@ -387,7 +383,7 @@ Test Case 7: loopback reconnect test with split ring
> vector_rx path and server m  2. Launch virtio-user as server mode with 2
> queues::
> 
>      ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
>      -- -i --nb-cores=2 --rxq=2 --txq=2
>      >set fwd mac
>      >start tx_first 32
> @@ -422,7 +418,7 @@ Test Case 7: loopback reconnect test with split ring
> vector_rx path and server m  8. Relaunch virtio-user and send packets::
> 
>      ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
>      -- -i --nb-cores=2 --rxq=2 --txq=2
>      >set fwd mac
>      >start tx_first 32
> @@ -675,7 +671,7 @@ Test Case 11: loopback reconnect test with packed
> ring inorder non-mergeable pat  2. Launch virtio-user as server mode with 2
> queues::
> 
>      ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1
> \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
>      -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2
> --txq=2
>      >set fwd mac
>      >start tx_first 32
> @@ -710,7 +706,7 @@ Test Case 11: loopback reconnect test with packed
> ring inorder non-mergeable pat  8. Relaunch virtio-user and send packets::
> 
>      ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1
> \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
>      -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2
> --txq=2
>      >set fwd mac
>      >start tx_first 32
> @@ -747,7 +743,7 @@ Test Case 12: loopback reconnect test with packed
> ring vectorized path and serve  2. Launch virtio-user as server mode with 2
> queues::
> 
>      ./testpmd -n 4 -l 5-7 --log-level=pmd.net.virtio.driver,8 --no-pci --file-
> prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1
> \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
>      -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
>      >set fwd mac
>      >start tx_first 32
> @@ -782,7 +778,7 @@ Test Case 12: loopback reconnect test with packed
> ring vectorized path and serve  8. Relaunch virtio-user and send packets::
> 
>      ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1
> \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
>      -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
>      >set fwd mac
>      >start tx_first 32
> --
> 2.17.1