[PATCH 3/7] net/txgbe: fix register polling

[Jiawen Wu]

On Tuesday, June 21, 2022 8:19 PM, Ferruh Yigit wrote:
> On 6/20/2022 8:55 AM, Jiawen Wu wrote:
> > Fix to poll some specific registers, which expect bit 0.
> >
> > Fixes: 24a4c76aff4d ("net/txgbe: add error types and registers")
> > Cc: stable at dpdk.org
> >
> > Signed-off-by: Jiawen Wu <jiawenwu at trustnetic.com>
> > ---
> >   drivers/net/txgbe/base/txgbe_regs.h | 11 ++++++++---
> >   1 file changed, 8 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/txgbe/base/txgbe_regs.h
> > b/drivers/net/txgbe/base/txgbe_regs.h
> > index 3139796911..911bb6e04e 100644
> > --- a/drivers/net/txgbe/base/txgbe_regs.h
> > +++ b/drivers/net/txgbe/base/txgbe_regs.h
> > @@ -1864,8 +1864,13 @@ po32m(struct txgbe_hw *hw, u32 reg, u32 mask,
> u32 expect, u32 *actual,
> >   	}
> >
> >   	do {
> > -		all |= rd32(hw, reg);
> > -		value |= mask & all;
> > +		if (expect != 0) {
> > +			all |= rd32(hw, reg);
> > +			value |= mask & all;
> > +		} else {
> > +			all = rd32(hw, reg);
> > +			value = mask & all;
> > +		}
> >   		if (value == expect)
> >   			break;
> >
> > @@ -1898,7 +1903,7 @@ po32m(struct txgbe_hw *hw, u32 reg, u32 mask,
> > u32 expect, u32 *actual,
> >
> >   #define wr32w(hw, reg, val, mask, slice) do { \
> >   	wr32((hw), reg, val); \
> > -	po32m((hw), reg, mask, mask, NULL, 5, slice); \
> > +	po32m((hw), reg, mask, 0, NULL, 5, slice); \
> 
> Just to double check, is this change intentional, to always expect reading '0'
> from registers after writing to them?
> 
> Perhaps you can explain a little more about this polling after read/write logic
> and what was wrong in the commit log.
> 

This is exactly what register expects. 'wr32w' is used for IPsec Rx Index register.
For this register, when write command bit set, the content of register affected, and immediately self cleared by hardware.
So it always expect reading '0' from register mask 'TXGBE_IPSRXIDX_WRITE'.

> >   } while (0)
> >
> >   #define TXGBE_XPCS_IDAADDR    0x13000